Olabo Hand Wheel Type Vertical Steam Autoclave

China Olabo Hand Wheel Type Vertical Steam Autoclave, Find details about China Pressure Steam Sterilizer, Autoclave from Olabo Hand Wheel Type Vertical Steam Autoclave

Model NO.
BKQ-B120II
Sterilization Information Recording and Printing
Sterilization Information Recording and Printing
Material
Stainless Steel
Capacity
120L
Design Pressure
0.28MPa
Design Temperature
150 Celsius
Working Pressure
0.22MPa
Working Temperature
134 Celsius
Temperature Display Accuracy
0.1 Celsius
Sterilization Temperature Range
105-136 Celsius
Pressure Display Range
0-0.4MPa
Time Setting Range
0~999min
Chamber Material
304 Stainless Steel
Trademark
OLABO
Transport Package
Wood Case
Specification
640*550*1370mm
Origin
China
HS Code
8419200000
Model NO.
BKQ-B120II
Sterilization Information Recording and Printing
Sterilization Information Recording and Printing
Material
Stainless Steel
Capacity
120L
Design Pressure
0.28MPa
Design Temperature
150 Celsius
Working Pressure
0.22MPa
Working Temperature
134 Celsius
Temperature Display Accuracy
0.1 Celsius
Sterilization Temperature Range
105-136 Celsius
Pressure Display Range
0-0.4MPa
Time Setting Range
0~999min
Chamber Material
304 Stainless Steel
Trademark
OLABO
Transport Package
Wood Case
Specification
640*550*1370mm
Origin
China
HS Code
8419200000

 

olabo hand wheel type vertical steam autoclave

Product Description
Olabo Hand Wheel Type Vertical Steam Autoclave
Product Introduction

Vertical Autoclave is mainly used in hospitals, laboratories, universities and other institutes where users need to sterilize
temperature-resistance solid and liquid.
It can kill all microorganisms including spores. Under the pressure of 103.4 kPa (1.05 kg / cm2), the temperature reached 121.3 ºC and maintained for 15-20 minutes. It is suitable for sterilization of common culture medium, normal saline, surgical instruments, glass containers, syringes, dressings and other articles.

Advantage
1. Over-temperature automatic protection device: the system automatically cuts off the heating power when the set temperature is exceeded;

2. Anti-dry protection device: when the water level is too low, the system automatically cuts off the heating power;

3. Overpressure automatic relief device: if the opening pressure of the safety valve is exceeded, the safety valve will open and release the pressure;

4. Overcurrent protection device: When the equipment current is overloaded, the overcurrent protection switch will act, and the system will automatically cut off the power supply;

5. Leakage protection device: When the equipment has a leakage fault, the system will automatically cut off the power supply.

6. Safety interlocking device: a new type of pressure and temperature double safety interlock, the door cannot be opened after the equipment is pressurized.

7. Door detection device: Only when the sterilizer door is closed in place, can the power supply be
turned on and heated to produce steam.


Features
1. The translational handwheel sterilizer can open the lid quickly and save effort.

2. Fuma casters are easy to move and fix.

3. It has a quick maintenance window, and there is no need to disassemble the outer cover for maintenance of electrical parts.

4. The pot body is covered with 10mm glass wool, and the door cover is made of a new type of glass fiber reinforced plastic insulation material, which effectively insulates the door cover and the main body to prevent burns.

5. Built-in water tank, you only need to pour water into the water tank to start sterilization, no need to add water every time.

6. Steam generation method: The main body is heated to directly generate saturated steam without external steam source.

7. There are user-defined sterilization procedures for exposed devices, device bags, rubber, dressings, liquids, and solids and liquids.

8. Self-expanding silicone rubber sealing ring has good sealing effect and long service life. It is molded from transparent medical silicone rubber.

9. The temperature control display accuracy is 0.1 degrees, and the LED digital displays the temperature, time and fault alarm code in the sterilization chamber.

10. Process control: "water injection, heating, sterilization, drying, exhaust, alarm, complete automatic control of the whole process", the indicator light flashes to show the current working status.

11. Adopt gravity displacement and positive pressure pulsation exhaust mode to exhaust the load and cold air in the sterilization chamber, built-in water tank, and exhaust a small amount of steam outside.

12. With a drying function, after the sterilization is completed, the sterilized items can be dried.

13. The operation interface, one-key start, convenient and fast, the keys adopt mechanical keys, and the number of actions is ≥100,000 times.

14. Pressure gauge: Range: 0~0.4MPa, accuracy grade: 1.6.

15. The solenoid valve works stably and has a long service life.

16. The buzzer prompts the end of the sterilization cycle, and the status light displays at the same time.

17. A printer is optional to record the temperature during the sterilization process.

18. The service life is 5 years.
Specification
ModelBKQ-B50IIBKQ-B75IIBKQ-B100IIBKQ-B120II
Capacity50L75L100L120L
Design Pressure0.28Mpa
Design Temperature150ºC
Working Pressure0.22Mpa
Working Temperature134ºC
Temperature Display Accuracy0.1ºC
Sterilization Temperature Range105-136ºC
Pressure Display range0-0.4Mpa
Dynamic Pulse Exhaust Times0~9
Time Setting Range0~999min
Power SupplyAC110/220V±10%, 50/60Hz
Chamber Material 304 Stainless Steel
Water Source TypeDistilled water/Softened water
Consumption4.4KW4.7KW5.2KW5.2KW
Net Weight60kg85kg105kg120kg
Chamber Size(mm)Φ386*514Φ386*694Φ386*874Φ386*1054
Externl Size(L*D*H)mm640*550*970640*550*1070640*550*1270640*550*1370
Detailed Photos

 

Olabo Hand Wheel Type Vertical Steam Autoclave
Olabo Hand Wheel Type Vertical Steam Autoclave
Olabo Hand Wheel Type Vertical Steam Autoclave
 
Company Profile

Olabo Hand Wheel Type Vertical Steam Autoclave

Exhibition

Olabo Hand Wheel Type Vertical Steam Autoclave

Packaging & Shipping

Olabo Hand Wheel Type Vertical Steam Autoclave

Certifications

 

Olabo Hand Wheel Type Vertical Steam Autoclave
Payment

Olabo Hand Wheel Type Vertical Steam Autoclave

Q: Are you trading company or manufacturer? A: We are professional manufacture of lab equipment and we have our own factory. We commit to be your professional. We commit to be your professional, efficient and reliable partner. Q: How long is your delivery time? A: Generally it is within 7 working days after receiving 100% payment if the goods are in stock. Or it is 15 working days if the goods are not in stock, depending on order quantity. Q: Do you provide samples? Is it free? A: Yes, we could offer the sample. Considering the high value of our products, the sample is not free, but we will give you our best price including shipping cost.
 
Q: Are you trading company or manufacturer?
A: We are professional manufacture of lab equipment and we have our own factory. We commit to be your professional. We commit to be your professional, efficient and reliable partner.
 
Q: How long is your delivery time?
A: Generally it is within 7 working days after receiving 100% payment if the goods are in stock. Or it is 15 working days if the goods are not in stock, depending on order quantity.
 
Q: Do you provide samples? Is it free?
A: Yes, we could offer the sample. Considering the high value of our products, the sample is not free, but we will give you our best price including shipping cost.
 
Q:How about OLABO payment term?
A:T/T & L/C
 
Q:How about OLABO validity of quotation ?
A:Usually 15 days as the shipping freight and exchange rate can be fluctuant.
 
Q:How about the package?
A:Bubble film + Cotton +Standard export wooden case.
 
Q:How to inspect the goods?
A:Products will be checked by our QC staff frist, then our proejct manager. Client can come and check bythemselves or
third party check is available.