Products

Good Quality Building Material Floor Metal Decking Roll Forming Machine

China Good Quality Building Material Floor Metal Decking Roll Forming Machine, Find details about China Roll Former, Roll Forming Machine from Good Quality Building Material Floor Metal Decking Roll Forming Machine

Model NO.
YX35-199-995 roll forming machine
Effective Width
995mm
Thickness
0.4-0.6mm
Yield Strength
250 MPa
Material
Pre-Painted Galvanized Sheet
Main Motor Power
7.5kw
Trademark
Xiamen Liming
Transport Package
40gp*1
Specification
12T
Origin
Fujian, China(Mainland)
Model NO.
YX35-199-995 roll forming machine
Effective Width
995mm
Thickness
0.4-0.6mm
Yield Strength
250 MPa
Material
Pre-Painted Galvanized Sheet
Main Motor Power
7.5kw
Trademark
Xiamen Liming
Transport Package
40gp*1
Specification
12T
Origin
Fujian, China(Mainland)
Floor Decking Profile Roll Forming Tile Making Machine

Good Quality Building Material Floor Metal Decking Roll Forming Machine

This Producing Process Sketch As Below Picture:

Good Quality Building Material Floor Metal Decking Roll Forming Machine

This Profile Drawing As Below Picture:
 
General Parameter
1ItemParameters
2Model NO.YX35-199-995
 MaterialPre-painted galvanized sheet
4Thickness0.4-0.6mm
5Yield Strength250 MPa
6Feed Width1220 mm
7Effective width995mm
8Roll Stages18 Stages
9Shafts Diameterф75 mm
10Main Motor Power7.5kw
11Hydraulic Group Power11 KW
12Max. Line Speed Of Roll FormerApprox.4m/min
13Electric StandardAccording to local voltage

 
 
Machine Components 

A.   5Ton*1250mm Hydraulic un-coiler
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Load capacity = Max.5Tons
Coil Inner-diameter= 510±30mm, Coil width = Max.1250mm
Automatic stopping device with limited switch as assistance to control stop/start rotation
Good Quality Building Material Floor Metal Decking Roll Forming Machine
 
B.  Cold Rolling Mills 
Feeding section with guide;
Gear/Sprocket driving;18 stages to form
Wall-plate frame design(Thickness change from 18mm to 25mm)
Rollers manufactured from 45# steel,CNC lathes,hard chrome coating 
Shafts Diameter=ф95mm, Precision Machined
Main motor =18.5KW*2,Frequency speed control
Max line speed of roll former: Approx.4m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
Good Quality Building Material Floor Metal Decking Roll Forming Machine

C.  Hydraulic Cutting Device
Stop to cut, Post cut, Slug Breaker;
Cutting tool material : Cr12, Heat treatment;
Hydraulic group, Pump motor =7.5KW
Good Quality Building Material Floor Metal Decking Roll Forming Machine

D.   PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen, Inverter (SIEMENS), Encoder (Omron), REMOTE CONTROL etc
Cut-to-length tolerance≤±2 mm
 Control Voltage 24V
Good Quality Building Material Floor Metal Decking Roll Forming Machine

E. 6 METERS PNEUMATIC STACKING PALLET 
Stacking Length Max. 6 meters
Stacking length Min.2 meters
Pile up the sheet after cutting automatically.
Equipped with a bottom pallet to be pull out by motor driven
Support arm action in vertical direction, driven by pneumatic system
Action controlled by Pneumatic system.
The air supply provided by the user
Good Quality Building Material Floor Metal Decking Roll Forming Machine

 

 

Good Quality Building Material Floor Metal Decking Roll Forming Machine

Good Quality Building Material Floor Metal Decking Roll Forming Machine
 
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
 
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.

You Might Also Like