Polymeric Mdi Wannate Pm-200 Uesd for Rigid PU B Component
China Polymeric Mdi Wannate Pm-200 Uesd for Rigid PU B Component, Find details about China "Mdi, ISO from Polymeric Mdi Wannate Pm-200 Uesd for Rigid PU B Component
Basic Info.
Model NO.
WANNATE ® PM-200
Package
Drum
Appearance
Liquid
Type
Two Component
Product Name
Isocyanate Wannate Pm-200 Polymeric Mdi for Rigid
Nco Content/%
30.5-32.0
Drum
55 Galon
Trademark
Shunda
Transport Package
Iron Drum
Specification
250kg/Drum
Origin
China
HS Code
3909310000
Model NO.
WANNATE ® PM-200
Package
Drum
Appearance
Liquid
Type
Two Component
Product Name
Isocyanate Wannate Pm-200 Polymeric Mdi for Rigid
Nco Content/%
30.5-32.0
Drum
55 Galon
Trademark
Shunda
Transport Package
Iron Drum
Specification
250kg/Drum
Origin
China
HS Code
3909310000
Product Desciption
Application
WANNATE ® PM-200 is a diisocyanate-diphenylmethane (MDI)-based composition containing
some higher functionality isocyanates. It is a brown liquid at ambient temperatures.
WANNATE ® PM-200 can be widely used in the production of rigid PU foam heat-insulating
materials; also used in isocyanurate foam, paints, adhesives, structural foam, cellular integral
skin foam, automotive bumper and interior parts, high-resilience foam and synthetic wood,
etc. Due to its unique composition structure, WANNATE ® PM-200 can provide better flow
ability. It is, therefore, particularly suitable for the production which require strict flow
ability of systems.
Typical Physical and Chemical Properties
Package(s)
210L iron drums, 250kg/drum
Storage
Since WANNATE ® PM-200 is a reactive chemical, reaction with atmospheric moisture happens
easily and leads to the formation of insoluble ureas and carbon dioxide gas, which can result
in pressure build-up in closed containers and viscosity increase of the product. Containers
must therefore be absolutely dry and carefully sealed after congested with nitrogen.
Containers of WANNATE ® PM-200 should be kept properly closed and stored indoors at
ambient temperature (15-35ºC) in a well-ventilated area. Storage at low temperature (below
5ºC) may lead to some crystallization; this material must, therefore, be protected from frost.
PM-200
If crystallization does occur, the material should be heated by rolling the drum in a hot air
oven at 70-80ºC to melt it out, and should then be thoroughly agitated before use. Melting in
a water bath is not recommended.
Extended storage at temperatures above 50ºC is not recommended to prevent from the
formation of insoluble solids and viscosity increase.
Shelf Life
Under recommended storage conditions, the shelf life of WANNATE ® PM-200 is one year
since the date of production.
WANNATE ® PM-200 is a diisocyanate-diphenylmethane (MDI)-based composition containing
some higher functionality isocyanates. It is a brown liquid at ambient temperatures.
WANNATE ® PM-200 can be widely used in the production of rigid PU foam heat-insulating
materials; also used in isocyanurate foam, paints, adhesives, structural foam, cellular integral
skin foam, automotive bumper and interior parts, high-resilience foam and synthetic wood,
etc. Due to its unique composition structure, WANNATE ® PM-200 can provide better flow
ability. It is, therefore, particularly suitable for the production which require strict flow
ability of systems.
Typical Physical and Chemical Properties
| Test Item(s) | Specifications |
| Appearance | Brown Liquid |
| Viscosity(25ºC)/(mPa·s) | 150-250 |
| NCO Content/% | 30.5-32.0 |
| Density (25ºC)/(g/cm 3 ) | 1.220-1.250 |
| Acid Content/% | ≤0.030 |
| Hydrolysable Chlorine/% | ≤0.20 |
Package(s)
210L iron drums, 250kg/drum
Storage
Since WANNATE ® PM-200 is a reactive chemical, reaction with atmospheric moisture happens
easily and leads to the formation of insoluble ureas and carbon dioxide gas, which can result
in pressure build-up in closed containers and viscosity increase of the product. Containers
must therefore be absolutely dry and carefully sealed after congested with nitrogen.
Containers of WANNATE ® PM-200 should be kept properly closed and stored indoors at
ambient temperature (15-35ºC) in a well-ventilated area. Storage at low temperature (below
5ºC) may lead to some crystallization; this material must, therefore, be protected from frost.
PM-200
If crystallization does occur, the material should be heated by rolling the drum in a hot air
oven at 70-80ºC to melt it out, and should then be thoroughly agitated before use. Melting in
a water bath is not recommended.
Extended storage at temperatures above 50ºC is not recommended to prevent from the
formation of insoluble solids and viscosity increase.
Shelf Life
Under recommended storage conditions, the shelf life of WANNATE ® PM-200 is one year
since the date of production.
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine