Products

Powder Feed Center for Fast Color Change

China Powder Feed Center for Fast Color Change, Find details about China Powder Feed Center, Powder Feed Supply from Powder Feed Center for Fast Color Change

Model NO.
COLO-6000
Method Type
Automatic
Voltage
110V/220V
Powder
500W
Weight
500kg
Dimmenssion
L1.2m*W0.6m*H2.5m
Substract
Metal
Powder Capacity
30kg
Trademark
FF
Transport Package
Wooden Package
Specification
CE
Origin
Zhejiang
HS Code
8424899990
Model NO.
COLO-6000
Method Type
Automatic
Voltage
110V/220V
Powder
500W
Weight
500kg
Dimmenssion
L1.2m*W0.6m*H2.5m
Substract
Metal
Powder Capacity
30kg
Trademark
FF
Transport Package
Wooden Package
Specification
CE
Origin
Zhejiang
HS Code
8424899990
Powder feed center system provide fast color change 

Description
A good helper for powder manegemnet ,New design ,easy to operate,applied in automatic powder coating job and connect with the powder spray booth, could achieve high efficiencypowder feeding and recycling.

The feature of powder feed centre
1.Handling the powder provided by the original powder box or the new powder device.
2.Has the recycling device.
3.Integrated electrical PLC control system.
5.The powder position is monitored by the powder sensor detector.
6.The powder sensor detector controls the rise and fall of the powder transmission device, and the
powder transmission device is equipped with powder pump and fluidized hoses.
7.Powder suction tube, powder pump, powder tube and spray gun can be cleaned automatically.
8.The recovered powder is directly feed into the powder supply box.
9.With recycling system, can prevent powder overflow during spray process and color changes.

Technical data
CategoryparameterCategoryparameter
OutsizeW*H*D1350*2035*900mm
Voltage
Single phase 220V (customizable)
Ferquency38±1Khz
Power
100w (adjustable according to configuration)
Gas Supply pressure6-10bar
Equipped with air compressor
20kw(30HP)
Gas consumptionAbout 300 standard cubic meters/hour
Gas storage tank
2 cubic meters
Maximum water content
1.3g/m³
Maximum oil content
0.1g/kg
Powder supply
3-5kg/min
Powder Sieve machine
80 mesh screen
Powder box size
310*240*270mm
Screen size
345*275mm
 
Operation processPowder Feed Center for Fast Color Change
1.Put the powder bag into the powder hopper, insert the vibrating tube into the powder, and fix it with the powder bag fixing ring.
 
2.The powder enters the powder supply box through the powder pump box, and is sieved by an ultrasonic vibrating screen in the powder supply box
 
3.The sieved powder is fluidized by the fluidized air pipe in the powder supply box
 
4.The fluidized powder is sucked into the powder tube by the powder pump, and is sprayed out through the spray gun.
 
5.The powder that has not been sprayed onto the workpiece, falls on the floor of the spray booth, then sucked into the cyclone separator to become a gas-powder mixture.
 
6.In the cyclone separator, the powder is separated, then sent back to the powder supply tankthrough the recovery powder pump, and sieved through the ultrasonic vibrating screen
 
Application
The Ultrasonic powder feed center is specially designed for quick color change, replacing the traditional powder supply hopper.
You can directly put the original powder box in the position of the fluidizing powder bucket, then collect the original powder box into warehouse after use. The powder feed center is an important part of auto powder coating line, is an integrated component in the quick color change system, which affects the quality of the final coaiting.

Powder Feed Center for Fast Color Change
Any question,welcome to contact with me
Powder Feed Center for Fast Color Change



 

You Might Also Like