Oem ODM 20Km Sc Fiber Optic Transmission 1920X1080P Uncompressed Hdmi Signal Transmitter And Receiver
 

Brief introduction:

Product feature

1.Extend hdmi signal to 20KM by one optic fiber;
2.HDMI+IR+RS232 extender
3.Signle Mode SC interface optical fiber transmission technology;
4.IR and fiber sync-transmission;
5.Unique EMI Technology

Specifications

Product pannel:

Connection Diagram:

The 120M HDMI KVM Many to Many Over IP Extender with IR   HDMI, USB and IR over a LAN (Local Area Network). 

Support resolution up to 1080p Full HD

Support TMDS equalization and enhancement

By transmitting keyboard and mouse Datas via LAN, it is easy to control PC or other media players remotely

Routes up to 16 transmitters to 253 receivers by 1000M IGMP network switch

Support infrared remote control signal pass through

Support Fiber-Optic converter to extend transmission distance up to 20KM
Package Type:
1 * HDMI KVM Extender transmitter
1 * HDMI KVM Extender Receiver
1 * IR transmitter Cable
1 * IR Receiver Cable
2 * DC 5V 1A Power Adapter
1 * Quick-Start Guide

FAQ

Q: Why the direct one to one connection cannot be used?
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.

Connect Diagram

* 1 to 1 connection
Set IP address of the transmitter and receivers to the same

* 1 to Many connections
Set IP address of the transmitter and receivers to the same

* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.