Customization for HDMI KVM Extender 4K @30Hz 1 Input 1 Output with 100M UTP FTP Support RS232 Extender

This HDMI KVM extender consists of low time-delay wireless HD audio video Transmitter(TX) and wireless Receiver(RX). TX is a wireless audio and video stream transmitting device. It can transmit the HD audio video stream( such as computer, Blue-ray, DVA, Game signal(Xbox, Playstation)) by Wifi format. RX is a wireless audio and video stream receiving device. It can receive the audio video stream signal by Wifi from TX, and play at time, display HDMI signal. And support USB/ IR return function between RX and TX.

Features:

1,Ultra low time-delay, professional testing the lowest time delay is 64ms. It is the lowest time-delay technology in the WiFi field.

2,Private codec algorithm, proprietary real-time image transfer protocol.

3,Private DSP, strong stability.

4,Support IR full frequency segment return 20KHz - 60KHz.

5,Support USB control. Can use keyboard and mouse to control device at the Receiver side. Wireless mouse and keyboard supported.

6,No interference, and the open environment, the image transmission distance can reach 150 meters under the same image quality level.

7,Automatic pairing, automatic search for small interference channel to connect.

8,Get Telec, CE, RED, FCC certification.

Specification:

Product pannel:

Connection Diagram:

Single LAN cable HDMI extender Cat5e x 1 with sender and receiver 3D HDCP compatible for video extension

Brief introduction:
 HDMI extender extends your HDMI  display up to 50m away from your HDMI source using two Cat-5e/6 cable
This will not only break HDMI cable distance limitations, also the Cat-5e/6 cable installation more flexible and convenient
 use digital video transmission technology without delay, the image is clear and strong anti-interference to give you the picture perfect viewing experience you desire

2. Product features:

• Extend HDMI signal by two Cat5e/6
• The complete module does not need to install
• Implements long distance transmission by Cat5e/6 instead of HDMI cable
• HDCP compatible
• Extends the distance up to 50m,1080p using Cat5e/6 cable
• Small size
• Double transmission speed up to 2.5Gbps, supports 1080p display
• Uses Cat5e cable to connect the local and remote units
• Extends the distance between HDMI source and HDMI display
• Superior video quality - 1920 x 1200p, up to 1080p
• HDMI (3D, deep color), HDCP compatible
• Supports Dolby TrueHD and DTS HD master audio
• DDC compatible

Note: 
In order to achieve perfect transmission effect and long distance, use Cat-5e/6 cable

Packing list

1 * HDMI KVM Extender transmitter
1 * HDMI KVM Extender receiver
1 * DC 12V Adapter
2 * IR transmitter
2 * IR receiver
2 * RS232 plug(3Pins)
1 * User manual

FAQ

Q: Why the direct one to one connection cannot be used?
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.

Connect Diagram

* 1 to 1 connection
Set IP address of the transmitter and receivers to the same

* 1 to Many connections
Set IP address of the transmitter and receivers to the same

* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.