Products

Blend Polyether Polyol for Pipe Injection Insulation Rigid PU Foam

China Blend Polyether Polyol for Pipe Injection Insulation Rigid PU Foam, Find details about China Blend Polyol, Glutaraldehyde from Blend Polyether Polyol for Pipe Injection Insulation Rigid PU Foam

Model NO.
SDB10F-12
Trademark
Shunda
Specification
220kg/Drum
Origin
China
HS Code
2912190090
Model NO.
SDB10F-12
Trademark
Shunda
Specification
220kg/Drum
Origin
China
HS Code
2912190090

DESCRIPTION
Blend Polyether Polyol for Pipe Injection Insulation Rigid PU Foam 

SDB10F is a kind of blend polyol of whole water system used in pipe insulation. This kind of product use zero ozone depleting blowing agent (0 ODP), SDB10F use CO2 as the blowing agent, which produced through the reaction of water and isocyanate. Every performance of SDB10F finished foam products can meet the requirements of GB/T29047 standard.
The foam produced has the characteristics as following:
  1. Service life of the foam is very long, over 30 years.
  2. High temperature resistance and good dimensional stability of the foam, the highest temperature range is
  3.  
    Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products,

the data are not legally binding. 
Physical Properities Test MethodMetricValue
Core DensityGB/T 6343-2009kg/m360 up
Radial Compressive StrengthGB/T 8813-2008MPa0.3 up
Initial Thermal Conductivity(50°C)GB/T 10294-2008W/(m·K)≤0.033
Close Cell ContentGB/T 10799-2008%≥88
Water AbsorptionGB/T 8810-2005%≤10
Air bubblesGB/T 29047mm1/3Insulation Thickness.
Average cell size.GB/T 29047mm≤0.5

Blend Polyether Polyol for Pipe Injection Insulation Rigid PU Foam
Blend Polyether Polyol for Pipe Injection Insulation Rigid PU Foam

Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.

Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.

Blend Polyether Polyol for Pipe Injection Insulation Rigid PU Foam
Blend Polyether Polyol for Pipe Injection Insulation Rigid PU Foam
Blend Polyether Polyol for Pipe Injection Insulation Rigid PU Foam


Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
 
 

 

You Might Also Like