Blend Polyol for Water Heater

China Blend Polyol for Water Heater, Find details about China Polyether Polyol, Blend Polyol from Blend Polyol for Water Heater

Model NO.
DFR2 Series
Trademark
G-TECH@
Transport Package
Steel Drum/IBC Drum/Tank
Specification
pure
Origin
China
Model NO.
DFR2 Series
Trademark
G-TECH@
Transport Package
Steel Drum/IBC Drum/Tank
Specification
pure
Origin
China

Blend Polyol DFR2 Series for Water Heater

Chemical Name:

polyol blend,system polyol or combined polyol

 

Simple introduction (product features)

1)excellent flowability

2)foam density distribute uniformity                             

3)low thermal conductivity                                                                       

4)excellent low temperature dimensional stability

 

1.General description

Blend Polyol DFR2 Series is a semi resin premix combined polyol, based on polyether polyol, formulated with catalyst,blowing agent,stabilizing agents and other additves(if necessary) according to a parameter.It is a fully formulated polyether polyol developed for the rigid insulation of water heaters. Blowing is provided with CFC free.It is the mixture of polyol.

 

2.Technical Quality Conditions:

 

2.1 Physical characteristics

                                                                                       
Item                            Unit                    Index
                                                                                       
Appearance                     light yellow transparent liquid
Viscosity           25ºC,mPa.S                400±50
Hydroxy Value       mgKOH/g                 380-20
Specific gravity         25ºC             1.1±0.5
                                                                                       

2.2 Process and reactive characteristics( actual value varied depends on the processing conditions)

 

2.3.1 Foaming condition

 

2.3.1.1 Manual mixing

Component temperature:20-23ºC

Mixing speed:5000rpm/8 sec

 

2.3.1.2 Machine

Demould time:8 min

Component temperature: 22-25ºC

 

2.3.1.3 Recommended processing property

  Product

Item

DFR21

DFR22

Blowing agent

type

HCFC-141b

WATER

Free rise density

Kg/m3

24-26

32~34

Remark

   

Note: ratio varied depends on processing system

2.4 Foam characteristics

ITEM

PROPERTY

Apparent core density (kg/m3)                         ≥

30-40

Initial Thermal conductivity (W/m.k)                     ≤

0.024

Compressive strength                                 ≥

130

Closed-cell rate  (%)                                 ≥

90

water absorption  (V/V) %                            ≤

5

Dimensional stability(%)

Low temperature

(-30±3ºC,24hs)

1

High temperature

(100±3ºC,48hs)

1.5

Moisture vapour transmission

38ºC,RHO-88%

Ng/Pa.m.s

6.5 or by negotion

 

 

3. Main Applications:

rigid PU foam cores for insulation of water heaters in combination with isocyanate (MDI).

 

4.Packing and storage:

The product is delivered in 200 liters clean, dry and tightly sealed metal sheet drums, cubitanks,stainless steel railway labeled with the product's name, batch number, manufacturing date, net weight, producer's name.The product is stored in genuine packing, in covered areas, cold, dry, vented areas, in tightly closed containers under nitrogen blanket, far from heat, moisture and inconsistent materials, at temperatures between 20ºC and 25ºC.The recommended shelf life is 6 months.

 

5.Safety Considerations:

Before handling and using of product, the personnel must be aware of the dangers implied. This information is on the product label.

 

6.Attention:

Please contact DAFFODIL to see if the document has been revised and for any other additional information related to the product.


Blend Polyol for Water Heater
Blend Polyol for Water HeaterBlend Polyol for Water HeaterBlend Polyol for Water Heater

Blend Polyol for Water Heater