DC12/24V 4 Wire Photoelectronic Heat Detector with Relay Output No/Nc Option
China DC12/24V 4 Wire Photoelectronic Heat Detector with Relay Output No/Nc Option, Find details about China Smoke Alarm, Fire Alarm from DC12/24V 4 Wire Photoelectronic Heat Detector with Relay Output No/Nc Option
Basic Info.
Product Type
Heat Detector with Relay Output
Sound Pressure Level
Above 80dB
Appliction
Security System,Industrial Control Equipment
Transport Package
Carton
Specification
D103mm, H55mm
Origin
China
HS Code
8531901000
Product Type
Heat Detector with Relay Output
Sound Pressure Level
Above 80dB
Appliction
Security System,Industrial Control Equipment
Transport Package
Carton
Specification
D103mm, H55mm
Origin
China
HS Code
8531901000
Product Desciption
Introduction
4-Wire heat alarm with relay output is common used for industrial control equipment, power cabinet, charging pile, alarm bell etc fire warning system. This smoke alarm has the characteristics of high sensitivity, stability and reliability, small power consumption and durability. Easy to install.
Parameters
| Product Name | Heat detector with relay output | Rated operational voltage | DC9~28V |
| Sound pressure level | ≥80db | Static current | ≤200uA |
| Alarm current | ≤45mA | Work temperature | -10°C~+50°C |
| Output | Sound&light alarm, relay output/NO NC option | Humidity | ≤95%. |
| Sensitivity | 0.15~0.3dB/m | Contact capacity | 1A/DC24V |
Functions
1. Detection.
Press detection button, it can fully check the alarm functions. And the alarm light flashes quickly with a rapid sound.
2. Alarm.
In the normal environment, The alarm will flash automatically every 10S and automatically detects the concentration of smoke in the surrounding environment at regular intervals(around 1.6s),If the smoke concentration is close to the alarm value, the alarm starts to perform intelligent calculation, and the alarm indicator light starts to flash. If the calculation result reaches or exceeds the alarm value, the alarm will start the sound-light alarm and start the relay. When the ambient smoke concentration drops below the alarm value, the alarm will automatically return to the normal working state.
3. Output.
Passive contact output. Contact capacity 24V/1A, NC or NO two kinds of output.
Installation
First drill two mounting holes with a diameter of 5mm on the ceiling 43~ 62.5mm apart. Fix the alarm base with the plug and screw. Then connect the power line and output line.install the alarm to the base in the correct direction. Press down and tighten clockwise, finally turn on the power, it works.
Product range
4-wire smoke detectors with relay output.
2 wire smoke and heat detectors for switch fire sensor
Standalone smoke detectors and combustible gas detector
Explosion-proof product for fire alarm system
Addressable fire alarm system
Wireless alarm system
Electrical fire monitor system
Extinguishing control system
Fire door monitor system
Fire extinguishing Water cannon System
Service
1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine