1. Specifications for High-Quality Jerry can Blow Machine Plastic Container Can Blow Moulding Machine:
1). Extrusion blow molding machine experience of the engineer for more than 12 years
2). The machine produces the max for 30L jerrycan
3). The capacity is about 45pcs/h.
4). The famous imported components for machine
5). Taiwan Yuken hydraulic valve for stable working
6). The deflashing system can be equipped according to the customer's request.

2. Main characteristics of High-Quality Jerry can Blow Machine Plastic Container Can Blow Moulding Machine
1). Accumulator head, single layer, the capacity is up to 30L jerrycan, drum., bottles and etc
2). It processes the material like HDPE, PP, ABS and etc.
3). Power supply: 380VAC, 50Hz (depending on the client's county ).
4). The machine is mainly composed of an extrusion system, die head system, clamping system, hydraulic system, and electrical systems:
5). The machine uses an energy-saving system which can reduce at least 20% the power consumption
EXTRUSION UNIT
Screw mode: Gradually changed screw with the same distance and different deep;
Diameter of screw: φ 80mm, L/D: 24/1;
Material of screw: High-quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2;
Material of barrel: High-quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2;
Drive mode: Japanese Toshiba converter instrument + Hard gear surface decelerator;
Drive power: 41KW;
Plasticizing capacity: 100Kg/hr;
Temperature controlling: Adopt automatic temperature control models such as Japan Mitsubishi. Temperature controlling precision: Various ± 1%;
Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel;
Heating power: 20.2KW;
Zones of heating: 4 zones;
Mode of cold: Automatic blowing, three blowers. Power: 90W× 4;

ACCUMULATOR HEAD SYSTEM
Mode of general constructions: Accumulator's head;
Mode of heating: Adopting ceramic heaters;
Temperature controlling precision: Various in ± 1;
Heating power: 15.2kw;
Temperature control: Adopting Japan Omron automatic temperature control module;
Temperature controlling precision: Various in ± 1%;
Max annular diameter: 250mm;

Some general information for High-Quality Jerry can Blow Machine Plastic Container Can Blow Moulding Machine
Clamping Force for platen: 410KN
Oil pump power: 15kw
Screw diameter: 100mm
Platen stroke: 450-1250mm
Platen size: 1020*1060
Max Platen size: 1020*1060mm
Air pressure: 0.8MPa
Air Consumption: 0.8m3/m
Total power: 110kw
The L/D ratio: 24: 1/30: 1
Plasticzing capacity: 170kg/h
Max die capacity: 10L
Weight: 18T

3. Advantages of this High-Quality Plastic Jerry can Blow Machine Plastic Container Can Blow Moulding Machine:
1). Adopt an energy-saving system that can increase the 18% efficiency.
2). The capacity is about 45pcs/h which is15% higher than some others.
3). Power consumption is about 20% lower.
4). All processes are well computerized which makes the operation more convenient.
5). Imported hydraulic components which guarantee stable working for a long time.

5. After-sale service Jerry can Blow Machine Plastic Container Can Blow Moulding Machine:
1). Instruction for Installation and Debugging
Before delivery, KASTER takes responsible for debugging the machine, in order to make sure the provided machine could be safely and smoothly put into operation.
KASTER also takes responsibility to have to debug overseas, and Client abroad please sends invitation forward of time to the engineer of KASTER, provides the engineer with round-trip tickets, accommodation, vehicle, and $55 per day salary.
2). User Training
Before delivery, KASTER will take responsibility to indoctrinate technical training to the users so that they could understand the machine's features and could operate the machine by themselves.
3). Warranty Period
The warranty period for the KASTER machine is one year with lifelong maintenance. If the user requires a special quality guarantee, other stipulated warranty periods may be made after mutual agreement.

6. Main parameters for this High-Quality Jerry can Blow Machine Plastic Container Can Blow Moulding Machine:

 
Installation:
We can send technician to install the machine or customer can send technician to our factory for training.
Buyer need to pay air thicket & food & hotels.

Remark:
(a) All specifications and designs are subject to change without notice.
(b) The price of the machine all are in US dollars based on FOB China Port.
(c) The price is base on 380V, 50Hz, 3 Phase, for special power, add additional 5% of all machine.