10% discount Stone Crushing Machine Jaw Crusher PE600*900

Introduction of Stone Crushing Machine Jaw Crusher PE600*900

Stone Crushing Machine Jaw Crusher PE600*900 are typically used as primary crushers, or the first step in the process of reducing rock. They typically crush using compression. The rock is dropped between two rigid pieces of metal, one of which then move inwards towards the rock, and the rock is crushed because it has a lower breaking point than the opposing metal piece.
prospector rock crusher movement is obtained by using a pivot point located at one end of the "swing jaw", and an eccentric motion located at the opposite end.



 
Stone Crushing Machine Jaw Crusher PE600*900 working principle:

The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw, and the stuff will be crushed in multiple ways. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of jaw crusher moves away from fixed jaw by the pulling force of rod and spring, the products after crushing will be discharged from the outlet of Jaw crusher.



Main Advantages of Stone Crushing Machine Jaw Crusher PE600*900:
 
1. The prospector rock crusher has a deep crushing cavity and the frame employs the joggle joint welding and entirely annealing technology which make the crusher a simple, durable and robust structure and improve the capability and the crushing ratio.
2.Digital simulation of the operating trace and speed of the movable jaw ensure a high capacity and low consumption rate of the ware parts.
3.Utilization rate of the tooth plate has been increased by using segmented tooth plates which are replaceable.
4.Hydraulic adjustment of the discharge opening ensures a more convenient and safe operation.
5.The service life of the toggle plate and adjustment seat has been developed by the double-layer adjustment seat with arc-shape liner inside it which will disperse the partial pressure evenly.
6.The frame could be taken into upper part and lower part which can be fixed together again by dowel pins. This sort of structure makes users easy to assembly, disassembly, transport and install the crusher.


Stone Crushing Machine Jaw Crusher PE600*900 technical data: