The introduction of the Jaw Crusher
Jaw crusher is one of the most popular equipment in mine industry production. It is mainly used in all kinds of materials with middle crushing or coarse crushing, and the crush resistance below 320MPa. Jaw crusher has the features of high crushing rate, simple structure, stable operation, easy maintenance and low operation cost. Jaw crusher is derived by motor through the motors wheels; the eccentric shaft is derived by the fangled belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, The movable jaw plate and cheek plate can be crushed and discharged through the discharging opening. The jaw crushers  are ideal for primary and secondary crushing.

Jaw crusher widely used in mining, quarry, metallurgy, building, highway, railway, construction waste processing, water conservancy, and chemical industry.

 

The raw material part of photos are as below:

 

 

Jaw crusher Features :

high reduction ratio

easy operation

simple construction

repeatable performance

easy maintenance

low consumption

Jaw Crusher Working Principle
The structure of jaw crusher contains the frame, eccentric shaft, big belt pulley, flywheel, movable jaw, side guard plate, toggle plate, rear seat of toggle plate, modulation gap screw, returning spring, fixed jaw plate and movable jaw plate, etc, among which the toggle plate is used for safety. The working mode of this series jaw crusher is pressing deviously.
The technical parameters of the Jaw Crusher

Model	Max feed size (mm)	Discharge size (mm)	Capacity (t/h)	Power (kw)	Weight (T)
PE-150×250	125	10-40	1-3	5.5	0.8
PE-200×300	180	20-70	2-8	11	1.4
PE-250×400	210	20-80	5-20	15	3
PE-400×600	350	40-100	15-60	30	6.5
PE-500×750	425	50-100	40-110	55	11.3
PE-600×900	480	65-160	90-150	75	17.625
PE-750×1060	630	80-160	100-250	90-110	27.5
PE-900×1200	750	95-165	120-300	110-160	52
PE-1000×1200	850	110-260	180-350	110-160	57
PE-1200x1500	1020	150-300	300-500	180-220	100

Model	Max feed size (mm)	Discharge size (mm)	Capacity (t/h)	Power (kw)	Weight (T)
PEX-150×750	120	8-25	10-40	15	3.5
PEX-250×750	210	12-25	15-50	30	5.5
PEX-250×1000	210	12-50	30-95	37	6.37
PE-350×750	300	15-50	20-50	30	6.5
PE-300×1300	250	20-90	45-130	75	11
PE-600×900	480	65-160	90-150	75	17.625

The Machine Delivery
Before sales-service and After sales-service
Our factory and team

Why choose us?

 Our PE Jaw crusher has:

1. Large capacity: deep crushing cavity can increase the feeding capacity and output, it improves working efficiency to a great extent.
2. High ratio of reduction: high ratio of reduction can greatly decrease the power consumption and wear loss.

3. Large  adjustable range: adjustable gasket device can increase the flexibility of the equipment which can meet dfferent demands.

4. Easy maintenance: safe and reliable lubricating system make customer easy to change the parts, which greatly decrease maintenance workload.

5. Low operating cost: Simple structure and reliable operation will guarantee your low operating cost.

6. Energy saving: single machine can save energy by 15%-30%, which system can save more than double.
7. Wide range of choices: we provide different dimensions of product which can meet various needs.
For more details, please contact us