BS-Yj- 350L Grouting Equipment Self-Loading Cement Mixing Grout Machine
China BS-Yj-350L Grouting Equipment Self-Loading Cement Mixing Grout Machine, Find details about China High Pressure Grouting Pump, Mortar Mixing Machine from BS-Yj-350L Grouting Equipment Self-Loading Cement Mixing Grout Machine
Basic Info.
Model NO.
ZTBS-YJ-350L
Vibrating Amplitude
2.6mm
Certification
ISO9001: 2000, CE
Condition
New
Color
Orange
Motor Power
7.5 Kw
Mixing Speed
1440 Revolutions Per Minute
Moving Speed
20 Km/ Hour
Material
Cast Iron
Trademark
Zhongtuo
Transport Package
Wooden Box
Origin
China
HS Code
8474390000
Model NO.
ZTBS-YJ-350L
Vibrating Amplitude
2.6mm
Certification
ISO9001: 2000, CE
Condition
New
Color
Orange
Motor Power
7.5 Kw
Mixing Speed
1440 Revolutions Per Minute
Moving Speed
20 Km/ Hour
Material
Cast Iron
Trademark
Zhongtuo
Transport Package
Wooden Box
Origin
China
HS Code
8474390000
Product Desciption
Introduction for automatic cement grouting machine
1.1 Automatic operation
Use only a single set of powder and water weight, trolley can be automatic weighing, control the weight of water and stirring time. After high speed stirring to open the discharge valve, the cement slurry into the low-speed stirring barrel reserve, and then close the high-speed stirring barrel discharging valve, high-speed stirring the next feeding blend.
1.2 High speed mixing
The high speed mixing drum of this car has a rated speed of 1440 RPM / min. high speed mixing can make the powder and water to be fully compatible;
Its working procedures are as follows: first feed the water automatically, then the high-speed mixing drum will automatically run, and then add the grouting agent, the cement will continue to stir, after 3 minutes, it can be discharged into the storage tank with mixing function.
1.3 Low speed storage mixing bucket precipitation design
The design of cement grouting machine has a large capacity storage tank, can accommodate slurry of high speed stirring barrel has been completed to meet the continuous stirring, feeding flow grouting equipment. And have low speed mixing function, this function can effectively prevent mortar precipitation.
1.4 Drag the frame system
The trolley is assembled on the movable frame and can be conveniently pulled and moved by other motor vehicles
1.5 Optional continuous screw grouting system
When the railway is prestressed construction, the users can choose the continuous screw grouting equipment. The basic parameters are as follows:
Mudjacking machine for continuous work, no pressure fluctuation of pump slurry bubble, theoretical production volume of 4.5 cubic meters / hour. And with automatic pressure maintaining function. The total pressure range for 3MPa, to ensure reliable work pressure. When the pressure gauge pressure grouting is generally in the range of 0.5MPa--0.7MPa. The minimum index value 0.1MPa.
1.6 Central controller system
The system is installed in the electric control box. The panel of the control box is equipped with a computer automatic control switch and a manual switch. It can be operated automatically or manually in two ways to complete the data calculation and accurate operation of each mechanism
2.Introduction of structure
2.1 High-speed mixer
This machine has a mixing barrel, stirring spindle and blade rotation, gear parts and drive motor. The stirring blades installed in the barrel body of the main shaft, gearbox is connected with the motor by working blades when the stirring barrel rotating speed, the barrel has been fully stirring. The high-speed stirring mechanism three weighing sensor is fixed on the three the tripod through, through the computer control (with memory function, accurate measurement to 0.1 kg), to achieve precise delivery of various ingredients.
2.2 Automatic feeding machine
The machine is composed of two screw conveyor and two hopper. Two kinds of powder were put into two hopper in computer automatic control through the screw conveyor accurately input high-speed mixing barrel. High speed stirring barrel operation if the inlet is spewing phenomenon, the user can bind on the feed inlet of the bag, reduce the splash slurry.
2.3 Low speed mixer
Low speed mixer equipped with low-speed mixing barrel, stirring shaft, stirring arm, transmission gearbox, drive motor. The main is to ensure the slurry precipitation under the condition of high speed stirring barrel storage after slurry after mixing, grouting equipment to the uninterrupted supply of slurry in large flow grouting;
2.4 Water supply institutions
The water supply system is composed of water pump (or electromagnetic valve) and related pipeline. Under the automatic control of the computer, the system can automatically inject water into the high-speed mixing drum automatically and accurately
2.5 Grouting system
The grouting system is composed of a screw type pressure pump and related pipelines. The slurry inlet of the grouting machine is connected with the slurry outlet of the low speed mixing barrel, and the high-pressure constant pressure grouting work is realized by the electric control
2.6 Central controller system
The system is installed in the electric control box. The panel of the control box is equipped with a computer automatic control switch and a manual switch. It can be operated automatically or manually in two ways to complete the data calculation and accurate operation of each mechanism.
main performance parameters
Model: HNBS-YJ-350L
High speed mixing section:
Mixing speed: 1440 revolutions per minute
Single stir: 300 kg / time
Measuring accuracy: better than 0.5% (fixed amount of agitation)
Motor power: 7.5 kw
Low speed mixing section:
Mixing speed: 70 revolutions per minute
Motor power: 2.2 kw
Automatic feeding system:
Work form: screw conveyor
Motor power: 2.2 kW, 2 units
Electronic control system:
System name: HNBS-YJ-350L automatic feeding and grouting control system
Trailer frame:
Moving speed: not more than 20 km/ hour
FAQ:
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: What the exactly address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equipment.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long will you take to arrange production?
A7: we can delivery the normal goods within 7-15 days. Other nonstandard electrical items we will delivery within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with professional design team, OEM orders are highly welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of freight.
Q11: What is your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
Our Company Information:
We have been focusing on high-quality mechanical equipment and construction products for more than 20 years. Especially have rich experience at mining equipment, main products include:
Ultra Large Rock Splitter
Submersible Drilling Rig
Spraying Machine
Grinding Machine
About Our Factory:
About the products:
Packing and Shipping:
Purchase Process:
About the Quality:
Others:
Why you choose us:
1. We are a real factory offering products and provide free technical advice.
2. Company in business for many years and served Over 50 countries customers.
3. All machine with CE, ISO,SGS certificate. Machine and spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.
1.1 Automatic operation
Use only a single set of powder and water weight, trolley can be automatic weighing, control the weight of water and stirring time. After high speed stirring to open the discharge valve, the cement slurry into the low-speed stirring barrel reserve, and then close the high-speed stirring barrel discharging valve, high-speed stirring the next feeding blend.
1.2 High speed mixing
The high speed mixing drum of this car has a rated speed of 1440 RPM / min. high speed mixing can make the powder and water to be fully compatible;
Its working procedures are as follows: first feed the water automatically, then the high-speed mixing drum will automatically run, and then add the grouting agent, the cement will continue to stir, after 3 minutes, it can be discharged into the storage tank with mixing function.
1.3 Low speed storage mixing bucket precipitation design
The design of cement grouting machine has a large capacity storage tank, can accommodate slurry of high speed stirring barrel has been completed to meet the continuous stirring, feeding flow grouting equipment. And have low speed mixing function, this function can effectively prevent mortar precipitation.
1.4 Drag the frame system
The trolley is assembled on the movable frame and can be conveniently pulled and moved by other motor vehicles
1.5 Optional continuous screw grouting system
When the railway is prestressed construction, the users can choose the continuous screw grouting equipment. The basic parameters are as follows:
Mudjacking machine for continuous work, no pressure fluctuation of pump slurry bubble, theoretical production volume of 4.5 cubic meters / hour. And with automatic pressure maintaining function. The total pressure range for 3MPa, to ensure reliable work pressure. When the pressure gauge pressure grouting is generally in the range of 0.5MPa--0.7MPa. The minimum index value 0.1MPa.
1.6 Central controller system
The system is installed in the electric control box. The panel of the control box is equipped with a computer automatic control switch and a manual switch. It can be operated automatically or manually in two ways to complete the data calculation and accurate operation of each mechanism
2.Introduction of structure
2.1 High-speed mixer
This machine has a mixing barrel, stirring spindle and blade rotation, gear parts and drive motor. The stirring blades installed in the barrel body of the main shaft, gearbox is connected with the motor by working blades when the stirring barrel rotating speed, the barrel has been fully stirring. The high-speed stirring mechanism three weighing sensor is fixed on the three the tripod through, through the computer control (with memory function, accurate measurement to 0.1 kg), to achieve precise delivery of various ingredients.
2.2 Automatic feeding machine
The machine is composed of two screw conveyor and two hopper. Two kinds of powder were put into two hopper in computer automatic control through the screw conveyor accurately input high-speed mixing barrel. High speed stirring barrel operation if the inlet is spewing phenomenon, the user can bind on the feed inlet of the bag, reduce the splash slurry.
2.3 Low speed mixer
Low speed mixer equipped with low-speed mixing barrel, stirring shaft, stirring arm, transmission gearbox, drive motor. The main is to ensure the slurry precipitation under the condition of high speed stirring barrel storage after slurry after mixing, grouting equipment to the uninterrupted supply of slurry in large flow grouting;
2.4 Water supply institutions
The water supply system is composed of water pump (or electromagnetic valve) and related pipeline. Under the automatic control of the computer, the system can automatically inject water into the high-speed mixing drum automatically and accurately
2.5 Grouting system
The grouting system is composed of a screw type pressure pump and related pipelines. The slurry inlet of the grouting machine is connected with the slurry outlet of the low speed mixing barrel, and the high-pressure constant pressure grouting work is realized by the electric control
2.6 Central controller system
The system is installed in the electric control box. The panel of the control box is equipped with a computer automatic control switch and a manual switch. It can be operated automatically or manually in two ways to complete the data calculation and accurate operation of each mechanism.
main performance parameters
Model: HNBS-YJ-350L
High speed mixing section:
Mixing speed: 1440 revolutions per minute
Single stir: 300 kg / time
Measuring accuracy: better than 0.5% (fixed amount of agitation)
Motor power: 7.5 kw
Low speed mixing section:
Mixing speed: 70 revolutions per minute
Motor power: 2.2 kw
Automatic feeding system:
Work form: screw conveyor
Motor power: 2.2 kW, 2 units
Electronic control system:
System name: HNBS-YJ-350L automatic feeding and grouting control system
Trailer frame:
Moving speed: not more than 20 km/ hour
FAQ:
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: What the exactly address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equipment.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long will you take to arrange production?
A7: we can delivery the normal goods within 7-15 days. Other nonstandard electrical items we will delivery within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with professional design team, OEM orders are highly welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of freight.
Q11: What is your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
Our Company Information:
We have been focusing on high-quality mechanical equipment and construction products for more than 20 years. Especially have rich experience at mining equipment, main products include:
Ultra Large Rock Splitter
Submersible Drilling Rig
Spraying Machine
Grinding Machine
About Our Factory:
About the products:
Packing and Shipping:
Purchase Process:
About the Quality:
Others:
Why you choose us:
1. We are a real factory offering products and provide free technical advice.
2. Company in business for many years and served Over 50 countries customers.
3. All machine with CE, ISO,SGS certificate. Machine and spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover