China Bottle Extrusion Blow Molding Machine Plastic Bottle Blow Molding Machine (KST70D), Find details about China Blow Molding Machine, Extrusion Blow Molding Machine from Bottle Extrusion Blow Molding Machine Plastic Bottle Blow Molding Machine (KST70D)
1). Instruction for Installation and Debugging
Before delivery, forstec takes responsible for debugging of machine, in order to make sure the provided machine could be safely and smoothly put into operation.
KASTER also take responsibility to have debugging overseas, and Client abroad please sends invitation forward of time to engineer of KASTER, provides the engineer with round-trip tickets, accommodation, vehicle and $55 per day salary.
2). User Training
Before delivery, KASTER will take responsibility to indoctrinate technical training to the users so that they could understand the machine features and could operate the machine by themselves.
3). Warranty Period
The warranty period for KASTER machine is one year with a life long maintenance. If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement.
6.Main parameters for this Bottle Extrusion Blow Molding Machine Plastic Bottle Blow Molding Machine(KST70D):
extruder | ||
1 | Screw diameter | 70mm |
2 | L/D ratio | 28:1 |
3 | Screw speed | 15-80r.p.m. |
4 | Drive motor | 75Kw |
6 | Heating zone with cooling fan | 5 zones |
7 | Output/Throughout | 200-250Kg/hr(HDPE particle) |
8 | Heating capacity | 9.1*5 kw |
9 | Vertical adjustment of head | 500mm |
10 | Forward/Backward adjustment of head | 600mm |
11 | Groove feed barrel cylinder | Have IKV |
12 | Gear box | Hard gear decelerator |
13 | Ladder and safety rails | fixed |
DIE HEAD | ||
2 | Design | First in and first out |
3 | Heating zone | 3zones |
4 | Heating capacity | 2.6kw/die head |
5 | Max die&pin diameter | 500mm |
6 | Die head axis with pre-blow | 220mm |
7 | Accumulator push-out stroke measurement | Transducer Italy Gefran |
8 | Injection pressure | 12Mpa |
9 | Extruder stop | Have |
CLAMPING UNIT | ||
1 | Tie bar | Two tie bar |
2 | Platen size | 730(W)X540(H) |
3 | ||
4 | Clamping force | 220KN |
5 | Close/Open stroke | 320-700mm |
6 | size of mold | 730×540mm |
7 | Clamping stroke measurement | Proximal sensor from TAIWAN |
8 | Hydraulic valve | Taiwan Haitack |
9 | Number of hydraulic cylinder | 1 |
10 | High pressure | 14mpa |
11 | Support parts for platen movement | Liner Guide |
HYDRAULIC SYSTEM | ||
1 | Drive motor | 37Kw |
2 | Hydraulic valve | Taiwan |
3 | Hydraulic pump | Taiwan |
4 | Connector\Tuber | Japan |
5 | Seal | Japan |
6 | Oil tank capacity |