DESCRIPTION
The Style R37 shaft sealing rings are used when additional lubrication is necessary from the outside. These sealing rings are usually fitted in pairs back-to-back, and this combination effectively seals the bearing lubricant and prevents the penetration of dust and splash water. The sealing rings have a peripheral groove on the outer periphery in addition to the radial grooves. With a fabric reinforced static part that is securely joined to the elastomer sealing lip. The sealing lip is also preloaded with a garter spring.
ADVANTAGES
Sealing ring is used, in case of adequate lubrication by the medium to be sealed, preferably where shafts pass through walls in mills and large gearboxes in heavy machinery manufacture.
    Particularly robust static part
    Lasting radial contact pressure
Highly wear-resistant
Application
    Rotary seals
    Mills
    Civil engineering
    Forging
    Heavy-duty cylinders
    General machinery
    Steel production
    Ship building
    Wind turbines
    Bearings
Materials
Rubber seal: NBR+Fabric (under 100 degree)
                     FKM+Fabric(under 180 degree)
Fitting & installation
For fabric reinforced seal R37 an axially accessible housing is necessary, as the rings must have low inclination. The Radiamatic 37 rings are supplied with oversize seal width. For reliable function the Radiamatic R rings must be axially compressed to the dimension "L".
An open housing with cover plate and tightening screws is necessary. Specific deformation forces are necessary for the compression. The cover plate and the tightening screws are to be designed appropriately. Please request recommended values.
Our services:
Guangzhou Morgan Seals Co., Ltd the expert in sealing solution field who combines the rich seals research and production experience of her parent firm with the advanced technology and administration of Morgan, Worcester. Morgan Seals Research and Development ability is based on her parent firm who has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, it also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.