Material: tungsten carbide; Outer diameter: 85mm (approx.)/98mm; Hole diameter: 16mm (about) if need 22mm  can be customized.Flat type is available

Suitable for rapid removal and shaping, especially for convex and concave areas.
Should only be used on non-metals or non-metal materials, suitable for wood and other materials.
Tungsten carbide coating consists of hundreds of very sharp teeth that quickly remove residue and are more durable than hundreds of sandpaper pads
Provides rapid material removal, saving your time and effort, suitable for curved work.

Features:
Suitable for rapid removal and shaping, especially for convex and concave areas.
Provides rapid material removal, saving your time and effort, suitable for curved work.
Tungsten carbide coatings consist of hundreds of extremely sharps teeth that rapidly remove stock and outlasts hundreds of sandpaper pads.
Tungsten carbide teeth give you a outstanding wear-life.
Should only be used on non-metals or non-metal materials, suitable for wood and other materials.
Fit for angle grinder and it is easy to operate it.
5/8 inch bore are intended to mount on a standard electric angle grinder.

Notice:
Actual color may be slightly different from the image due to different monitor and light effect
Please allow 1-3cm deviation due to manual measurement
Specifications:
Type: 3.3 inch diameter 5/8 inch bore shaping disc, 4 inch diameter 5/8 inch bore shaping disc (optional)
Teeth Material: Tungsten Carbide
3.3 inch diameter 5/8 inch bore shaping disc
Diameter: 85mm / 3.3 in or 98mm/3.81inch


Colors available:golden, silver

Surface: Flat ,Oblique,Circular arc,45 degree

New designs are in stock ,welcome for renew.