Products

High Performance Dispener Variseal Spring Energized Seal

China High Performance Dispener Variseal Spring Energized Seal, Find details about China AG-900+ Modular Dispensing Applicators Seals, Liquidyn P-DOT Series Jetting Valves Seals from High Performance Dispener Variseal Spring Energized Seal

Model NO.
walle spring seal
Type
Per You Request
Balance
None
Color
White, Black, Brown, Gray, Tan, Gold
Material
Virgin PTFE, Bronze Filled PTFE, Peek, UHMW-PE
Trademark
walle seals
Transport Package
Carton
Specification
per your request
Origin
Guangdong, China
HS Code
3926901000
Model NO.
walle spring seal
Type
Per You Request
Balance
None
Color
White, Black, Brown, Gray, Tan, Gold
Material
Virgin PTFE, Bronze Filled PTFE, Peek, UHMW-PE
Trademark
walle seals
Transport Package
Carton
Specification
per your request
Origin
Guangdong, China
HS Code
3926901000
Norson Asymtek Dispenser machanical spring seals

The sealing principle of spring energized seal is based upon the active loaded seal jacket against the mating gland surfaces, creating a leak-tight seal. The sealing forces could come from either spring deflection at low pressure or the system itself at high pressure to ensure full contact with the gland surfaces. In dynamic applications, the spring also provides resiliency to the seal jacket from inside out, compensating for material wear, jacket wall reduction, and eccentricity. The seal designs combined with the variety of high performance jacket materials provide the optimum sealing performance in a wide range of tough-to-seal environments.

Plastic seal jacket materials
Material CodeCompound Features & Recommended ServiceChemicalWear
10Virgin PTFE, premium grade, excellent material for gases and cryogenic applications, excellent chemical resistance, FDA approved, API 6A qualifiedEP
9Modified PTFE, improved creep and extrusion resistance, excellent for static applications, low gas per_x005f meability, good cryogenic properties, moderate to high vacuum service, FDA approved, API 6A qualified EF
16Fiber Glass/Moly filled, excellent wear and creep resistance, good abrasion resistance for sealing non_x005f_x0002_lubricated media, good extrusion resistance, highly wear resistant blend, API 6A qualified EE
15Carbon/Graphite filled, suitable for dynamic sealing of steam and water as well as poorly lubricated, recommended for dry or insufficiently lubricated applications, API 6A qualified EE
21Graphite filled, very low coefficient of friction, good for water service, excellent for dry or poorly lubricated applications, API 6A qualifiedEF
6Carbon Fiber filled, excellent wear and creep resistance, good electrical conductivity, good in water service, API 6A qualifiedEE
80Mineral filled, used for sealing food products, good wear properties for both rotary and linear applications, FDA compliant material for sanitary food and pharmaceutical processingGG
88Ekonol filled, good wear resistance but is not abrasive against non-hardened surfaces, should not be used in steam applications, best in dynamic applications running against soft metalsGG
35Stainless Steel filled, excellent material for steam service, good compression strength proportion along with better chemical resistance than bronze filled PTFE F G
1Bronze filled, suited for high speed dynamic sealing of lubricating media, should not be used for chemical service P E
2Polyimide filled, excellent wear resistance but not abrasive against non-hardened surfaces, should not be used in steam applications GE
24Virgin PEEK, high strength material predominately used for anti-extrusion devices, such as back-up ring and support ringsGG
23Carbon Fiber filled PEEK, improved high temp properties, extremely rigid, high strength material used for back-up rings, guide rings, and support rings, API 6A qualified GG
22PTFE filled PEEK, lower coefficient of friction than virgin PEEK, excellent high heat and wear resistance, chemically resistant to aggressive environments GE
26UHMW, best material for reciprocating service in water or water based fluids, typically used for sealing food products, paints, adhesives , excellent wear and abrasion resistance GE
101ETFE, melt processible fluoropolymer with good impact, abrasion and wear resistance, used in applica_x005f tions where gamma radiation resistance is required, superior to nuclear radiationFE
E - excellent, G - good, F - fair, P - poor

Metal spring materials
Material Code NameDescription
A301 Stainless SteelGood corrosion resistance for general applications
BInconel 718For extreme temperatures. Good resilience and tensile properties.
CElgiloyThe most resilient spring. Excellent chemical compatibility and corrosion resistance.Meets N.A.C.E. MR-01-75
DHastelloy C-276High nickel content for maximum corrosion resistance. Meets N.A.GE. MR-01-75
E304 Stainless SteelMeets N.A.C.E. MR-01-75. Good for general applications requiring corrosion
resistance and non-magnetic characteristics
F17-7 PH Stainless SteelGood for cryogenic applications. Used in many military-aerospace requirements.
G
316 Stainless Steel		A good corrosion resistant alloy for applications requiring higher chemical compatibility
H302 Stainless SteelTypical non-magnetic 300 series stainless steel

High Performance Dispener Variseal Spring Energized Seal
Walle have many years production experience and industry field application experience, we aimed at the different harsh sealing environments and developed various of materials suitable for applications. Improving all customers profit and saving all customers cost. Walle automatic production equipments and advanced testing equipments provide a strong guarantee for the manufacture of high quality Spring seals
Any questions please do not hesitate for Spring Energized Seal Dispenser Filling Machine Injection Valve, please contact me. It is our pleasure to be on service of you!     

Dongguan Walle Sealing Technology Development Co., Ltd
Tel: 86-769-33291139 / 22762051
Mobile: 13620011767
Fax: 86-769-22762052
URL: walleseals.en.made-in-china.com



 

You Might Also Like