Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter

China Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter, Find details about China Ultrasonic Range Transducers, Piezoelectric Ultrasonic Transducer from Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter

Model NO.
PHA-200-01XE
Detection mode
On the Radio
IP Rating
IP68
Certification
CE
Customized
Customized
Frequency
200kHz
Case Material
Titanium Alloy
Protection Level
IP68
Detection Distance
0.10-1.5m
Temperature Sensor
Optional
Application
Ultrasonic Gas Meter
Capacitance
1000PF
Trademark
PIEZOHANNAS
Transport Package
Carton
Specification
based on size
Origin
China
HS Code
8479899990
Model NO.
PHA-200-01XE
Detection mode
On the Radio
IP Rating
IP68
Certification
CE
Customized
Customized
Frequency
200kHz
Case Material
Titanium Alloy
Protection Level
IP68
Detection Distance
0.10-1.5m
Temperature Sensor
Optional
Application
Ultrasonic Gas Meter
Capacitance
1000PF
Trademark
PIEZOHANNAS
Transport Package
Carton
Specification
based on size
Origin
China
HS Code
8479899990
Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter 

 

 

Technical parameters:
 

ItemsTechnical ParametersImage
Name200KHz ultrasonic transducerTitanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter
ModelPHA-200-01XE
Explosive gas atmospheresWork normally
Active zone diameter15 mm
Frequency195KHz±5%
Detection Distance0.10~1.5m
Minimum Parallel lmpedance240Ω±20%
Capacitance1000pF±20% @1KHz
SensitivityNo load driving voltage:200Vpp,Distance:0.3m,
Echo Amplitude:8mV
Operating VoltagePeak Voltage<600 Vpp
Operating Temperature-40~+80ºC
Pressure16Kilos or 1.6MPa
Angle(Beamwidth)Half-power Beam Width@-3dB:7°±10%,
Sharp Angle::18°±10%
Housing Materialtitanium alloy
usageultrasonic gas flowmeter
dimension(Can be customized according to customer requirements)
Protection LevelIP68
Weight30g±5%(wire length:20cm)
Wiring Instructionsinterface: red: transducer +, white: transducer -, black: shielded wire, ( temperature sensor is optional)
Admittance CurveProduct Structure Diagram

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter
Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter
 

Block diagram of ultrasonic distance transducer :

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter

Schematic Diagram of Temperature Sensor (model: MF58_502F3470):

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter

Integrated type Cable instruction:   
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +      
White: transducer -         
Black: shielding


Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter

2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter
Red and black are temperature sensor wiring



   Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB

Three-core wiring instructions:                
                        
 Red: Transducer +
     Blue: temperature sensor +
     Black: Public-

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter

 Four-core wiring instructions:

Red: Transducer +                      
Yellow: Transducer-
Blue, black: temperature sensor


Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flowmeter