Wall Bench Side Bench Chemistry Laboratory Furniture 


Laboratories are designed to maintain the health and well-being of occupants. Potentially hazardous substances used in different laboratories include chemicals, radioactive materials and infectious biological agents. Laboratory safety has to be balanced with worker comfort. Comfort primarily is concerned with maintaining appropriate temperatures and air velocities. Laboratories must be designed so that energy efficiency gains do not reduce safety and comfort.


Plan Thoughtfully
Before you begin, get educated about the process. You need to know:
•  The needs and expectations of functional group managers and other internal team members.
•  The expertise and capabilites of your external team, including architects, engineers, CM, contractors, and lab planners.
•  Your actual, current needs for space, processes, support areas, and materials storage. Plans made on assumptions mean that you could make costly mistakes. Plans made on projected growth can get expensive very quickly, as you add HVAC, power, data, and work space that you may not need for years to come. And the fact is that most well-planned labs can easily accommodate change when needed.

Keep Your Layout Simple
•  Minimize or eliminate walls between functions.
•  Organize functional groups in shared space. It's cheaper to build now, and is more flexible later.
•  Use islands and peninsulas to maximize your usable space. Putting benches only around the perimeter wastes as much as 75% of your square footage.

Don't Overbuild
•  Build for your current needs, especially for power and ventilation.
•  Plan separate storage for bulk supplies.
•  Consider shared specialty gasses and data systems.


Suspended System
The worktop is supported by cantilever steel frame system. Cupboard and drawer units are suspended from horizontal rails beneath the worktop. The under-bench units have been designed to provide clear access to the floor for cleaning.

Framework uses 40*60*1.5 mm quality C / H type steel, joint is connected by cold rolled steel sheet stamping a integrated special fittings, making the whole frame structure more reasonable. The bearing performance and stability of the platform is especially strong; Steel surface by acid, phosphate, electrostatic powder spraying process, has the corrosion resistance, fire prevention, moisture-proof function etc. Surface treatment: C type steel frame in the production is completed, the pretreatment includes many steps: cleaning agents, aerosol spray, rinse water, passivation seal materials coating after the pretreatment of steel products in drying oven for drying and cooling; After cooling steel products to spray chamber in internal and external spray powder, its thickness at least 1.5 mils to finish bottom spray steel products immediately sent to the high temperature constant temperature box for grinding and chemical processing, in order to apply the test environment to use.

Phenolic resin
Surfaces made of cost effective High Pressure Phenolic Resin composite are resistant to chemical stain and corrosion.  Non-porous and non-conductive, it's strong durable qualities enable it to withstand high impact and shock.  It is easily cleaned with soap and warm water.