Products

Enameled Manganin Wire /Insulated Manganin Wire (6J12 / 6J8/ 6J11 / 6J13)

China Enameled Manganin Wire /Insulated Manganin Wire (6J12 / 6J8/6J11/ 6J13), Find details about China Manganin Wire, 6J12 from Enameled Manganin Wire /Insulated Manganin Wire (6J12 / 6J8/6J11/ 6J13)

Model NO.
6J12
Serves
Small Order Acceptable
sample
Free
standard
ATSM
Size
0.01-10mm
surface
bright
Trademark
TANKII
Transport Package
in Spool
Specification
IEC60317-8 ,GB/T6109.5.2008
Origin
China
HS Code
85441100
Model NO.
6J12
Serves
Small Order Acceptable
sample
Free
standard
ATSM
Size
0.01-10mm
surface
bright
Trademark
TANKII
Transport Package
in Spool
Specification
IEC60317-8 ,GB/T6109.5.2008
Origin
China
HS Code
85441100
Enameled Manganin Wire /Insulated Manganin Wire (6J12 / 6J8/6J11/ 6J13)

Material: CuNi1, CuNi2, CuNi4, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44, constantan, manganin, karma in form of wire/ribbon
Chemical Content, %
NiMnFeSiCuOtherROHS Directive
CdPbHgCr
2~311~130.5(max)microBal-NDNDNDND
 
Mechanical Properties
 
Max Continuous Service Temp0-45ºC
Resisivity at 20ºC0.47±0.03ohm mm2/m
Density8.44 g/cm3
Thermal Conductivity-3~+20KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC-2~+2α×10-6/ºC(Class0)
-3~+5α×10-6/ºC(Class1)
-5~+10α×10-6/ºC(Class2)
Melting Point1450ºC
Tensile Strength(Hard)635 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft340~535
Elongation15%(min)
EMF vs Cu, μV/ºC (0~100ºC)1
Micrographic Structureaustenite
Magnetic Propertynon
Micrographic StructureFerrite
Magnetic PropertyMagnetic
 
Application of Manganin
Manganin foil and wire is used in the manufacture of resistor, Particularly ammeter shunt, because of its virtually zero temperature coefficient of resistance value and long term stability.
Common temperature classes are 130, 155, 180, 200, 220C
Enamelled Wire diameter: 0.02 mm~1.8mm round
Detailed Description Manganin foil and wire is used in the manufactur of resistor, particularly ammeter shunts, because of its virtually zero temperature coefficient of resistance value and long term stability.

Enameled wire is a wire coated with a thin layer of insulation to prevent the wire surfaces from being in a short circuit when wound into coils. Magnetic flux is created when current flows through the coil. It is used mainly in the construction of motors, electromagnets, transformers and inductors. For ease of manufacturing inductive components like transformers and inductors, most of these wires can be soldered.

Enameled wires are classified by their diameter (AWG gauge number or millimetres), temperature class and insulation thickness. A thicker insulation layer results in a higher breakdown voltage (BDV). Common temperature classes are 130, 155, 180 and 200 ° C.

Due to the different characteristics of metal wire, wire enamelled coated with the different production processes, in the years of production practice, gradually we formed in the different needs of different materials coated enamelled techniques, especially in resistance wire, we can provide all kinds of production for resistance potentiometer constantan enameled wire, nichrome enameled wire, and kamar enameled wire, etc. We also in platinic gold, silver, gold plating coating on a successful experience in production. We can customize various special metal wire enameled wire. Its purpose is not confined to the resistance and the potentiometer production materials, such as sensors, etc.

Enameled Manganin Wire /Insulated Manganin Wire (6J12 / 6J8/6J11/ 6J13)





 

You Might Also Like