Products

Optical Fiber Distribution Frame Semi-Enclosed Type ADC

China Optical Fiber Distribution Frame Semi-Enclosed Type ADC, Find details about China Optical, Fiber from Optical Fiber Distribution Frame Semi-Enclosed Type ADC

Model NO.
Optical fiber distribution frame semi-enclosed typ
Trademark
FCJ OPTO TECH
Origin
China
HS Code
8536700000
Model NO.
Optical fiber distribution frame semi-enclosed typ
Trademark
FCJ OPTO TECH
Origin
China
HS Code
8536700000
Optical fiber distribution frame fully enclosed is mainly used for the end-end and distribution of the backbone optical fiber cable in the optical fiber communication system, which can conveniently realize the connection, distribution and scheduling of the optical fiber line, and is the wiring connection device of the optical cable and the optical communication device.
The complete internal equipment installation and wiring scheme is provided inside the rack, which realizes the normalized management of wiring, optimizes the optical fiber and various cable routing, and saves space.The frame is designed according to the 19" standard installation interface, which is divided into total enclosed type and semi-enclosed type according to the structure. 

Performance characteristics:
·Semi-enclosed cabinet structure, good dustproof, physical protection of the cable end and wiring to avoid accidental damage.
·The fiber distribution box (unit box) integrates the functions of fiber fusion, pigtail storage and wiring, and is easy to use and maintain. It is suitable for installation of various types of adapters.
·The fiber optic cable can be fixed, grounded and protected by the top or bottom of the rack. The fixed metal part of the cable is connected to the high voltage protective grounding device and insulated from the frame.
·The frame design adopts modular structure, which can be flexibly configured according to different requirements to realize the installation of the frame, which is convenient for capacity increase; the left and right side plates can be detached, and the racks can be connected without barriers.
·The jumper traces can be managed by the top over-line trough, the bottom over-line trough, the vertical trough and the horizontal cross-slot to optimize the layout of the traces, and the excess fiber loop can store redundant jumpers.

Use environment:
·Operating temperature:-25ºC~+55ºC

·Relative humidity:≤93%(+40ºC)
·Atmospheric pressure:80KPa~106Kpa

Technical characteristics:
·Connector loss (including insertion, interchange, repetition) ≤ 0.4dB;
·Insertion loss: ≤0.35dB;
·Return loss: PC≥45 dB, UPC≥50dB, APC≥60 dB;
·Insulation resistance: ≥1000MΩ (500V/DC) between metal components and between metal components and ground;
·Electrical strength: 3000V (DC) is applied between metal components and between metal components and ground for 1 min without breakdown or arcing;
·Service life: >20 years.

Specifications:
·Cabinet dimensions:
No.High * wide * deep
SH-ODF-50052000mm×800 mm×300 mm
SH-ODF-50062200mm×800 mm×300 mm
SH-ODF-50072000mm×840 mm×320 mm
SH-ODF-50082200mm×840 mm×320 mm

·Cabinet material thickness:1.2mm~1.5mm
·Cabinet selection: high quality cold rolled or cold rolled tensile steel
 

You Might Also Like