Products

Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor

China Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor, Find details about China Yrkk Motor, High Voltage Motor from Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor

Model NO.
YRKK500-8-450KW
Number of Poles
8
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
10000V/11000V
Protection
IP44 or IP54,IP55
Nsulation Class
F
Output Power
450kw
Cooling Method
IC611/IC616
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Rated Speed
745r/Min
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
YRKK500-8-450KW
Number of Poles
8
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
10000V/11000V
Protection
IP44 or IP54,IP55
Nsulation Class
F
Output Power
450kw
Cooling Method
IC611/IC616
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Rated Speed
745r/Min
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor
The high-quality slip ring motor adopts box-type structure. The frame is made of steel plate welded box structure, which is light in weight and good in rigidity. There are window holes on both sides and top of the frame, and a protective cover or cover can be installed to remove the protective cover. Or the cover can be observed and touched inside the motor to facilitate the maintenance and repair of the motor.
The high-quality slip ring stator adopts a sliding-in external press-fit structure, the stator winding is made of Class F insulation material, and the ends are reliably fixed and bundled. During the manufacturing process, the inter-turn pulse voltage test and the ground withstand voltage test are repeated. And vacuum pressure impregnation solventless paint process (VPI) treatment, therefore, the motor's insulation performance is excellent and reliable, mechanical strength is good, moisture resistance is strong. The wound rotor is treated with Class F insulation and vacuum pressure impregnation solventless paint process (VPI). The rotor weld head and the wiring are all insulated. The bearing has two types of rolling bearing and sliding bearing. According to the motor power and speed, the basic form of protection is IP54. If the motor has a high degree of protection, the protection level of the bearing will also increase.
The high-quality slip ring motor main outlet box is IP54 protection grade, generally installed on the right side of the motor (facing the motor shaft extension end), or can be installed on the left side of the motor according to the order. The main outlet box has a separate external Ground terminal.
Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor
Center height range: H355 ~ 1000mm
Power range: 185kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC611/IC616
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor
The high-quality slip ring motor is a sliding wrap-around three-phase asynchronous motor that can increase the starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.
Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor

Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor
ZCL Electric Motor Technology Co., Ltd. is a company mainly engaged in the manufacture, research and development and sales of motor products. The company has many types of motor products, including IEC standard motors. It is a professional IEC motor manufacturer. Related motor products have passed the product certification in China, the United States, Canada, Europe, the Middle East and other regions, and the products are exported to all over the world. Companies adhere to the "focus on products, service" business philosophy, is committed to improving the quality of safe motor products and services for customers around the world.
Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor
Yrkk 10000V High Voltage Wound Rotor Slip Ring Motor
1. The outer packaging of the products are all standard export-oriented wooden plywood packaging.
2, the product packaging is protected by moisture, water plastic soft packaging
3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package.
4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).



 

You Might Also Like