China Tecwayhome Waterproof Material 1.2mm Thermoplastic Polyolefin (TPO) Waterproof Membrane, Find details about China Waterproof Material, Waterproof Membrane from Tecwayhome Waterproof Material 1.2mm Thermoplastic Polyolefin (TPO) Waterproof Membrane
Thermoplastic Polyolefin (TPO) Waterproof Membrane
Overview:
Thermoplastic polyolefin (TPO) waterproofing membrane is a new type of waterproof membrane made of thermoplastic polyolefin (TPO) synthetic resin which combines ethylene propylene rubber and polypropylene by advanced polymerization technology, adding with antioxidant, anti-aging additive and softener. It can be made into reinforced waterproof membrane by using polyester fiber mesh cloth as internal reinforcement material, which belongs to synthetic polymer waterproof membrane.
Features:
TPO waterproof membrane combines the performance advantages of EPDM and PVC, which has the weather-resistance, low temperature flexibility and weldability of the latter. This material is different from traditional plastics. It shows high elasticity of rubber at room temperature and can be molded like plastic at high temperature. Therefore, this material has good processability and mechanical properties, and with high-strength welding properties. The physical properties, fracture strength, fatigue resistance and puncture resistance of TPO can be enhanced by adding a layer of polyester fiber fabric between the two TPO layers.
In practical application, the product has the characteristics of anti-aging, high tensile strength, high elongation, wet roof construction, unexposed layer without protection, convenient construction and no pollution. It is very suitable for the waterproofing layer of light energy-saving roofing.
Technical Index:
Execution of GB27789-2011 <Thermoplastic Polyolefin (TPO) Waterproof Membrane> requirement.
Test Items | Index | |||
Type H | Type L | Type P | ||
Thickness of Upper Resin Layer on Center Base Fabric | - | ≥0.4mm | ||
Tensile Performance | Maximum Tension / (N/cm) | - | 200 | 250 |
Tensile Strength >=MPa | 12 | - | - | |
Elongation at Maximum Tension %>= | - | - | 15 | |
Elongation at Break %>= | 500 | 250 | - | |
Rate of Dimensional Change of Thermo Treatment | 2 | 1 | 0.5 | |
Low Temperature Bending (°C) | -40°C |
Product Specification:
According to the composition of the products, it can be divided into homogeneous membrane (code H), membrane with fiber backing (code L) and inner reinforced membrane (code P).
The length specifications: 15m, 20m and 25m.
Width specification: 2.00m.
Thickness specification: 1.20mm, 1.50mm, 1.80mm, 2.00mm.
Other specifications can be discussed and agreed by both parties.
Scope of Application:
This product is suitable for building exposed or non exposed roof waterproof layer, as well as deformation prone underground waterproof. It is especially suitable for light steel structure roof. With reasonable level design and qualified construction quality, it not only reduce the weight of the roof, but also has excellent energy saving effect. It is the preferred waterproof material for roofs of large industrial plants and public buildings.
It can also be used in drinking water reservoir, toilet, basement, tunnel, grain depot, subway, reservoir, etc.
Transportation & Storage:
This product should be placed in a cool and dry place, direct sunlight is strictly prohibited.
Model:
1.2mm Homogeneous Thermoplastic Polyolefin (TPO) Waterproof Membrane | TH-FG-H-TPO12 |
1.5mm Homogeneous Thermoplastic Polyolefin (TPO) Waterproof Membrane | TH-FG-H-TPO15 |
1.2mm Thermoplastic Polyolefin (TPO) Waterproof Membrane with Fabric | TH-FG-L-TPO12 |
1.5mm Thermoplastic Polyolefin (TPO) Waterproof Membrane with Fabric | TH-FG-L-TPO15 |