China Jk2511 DC Low Resistance Tester Micro Ohmmeter, Find details about China Milli Ohm Meter, Resistance Tester from Jk2511 DC Low Resistance Tester Micro Ohmmeter
JK2511 DC low resistance tester
JK2511 DC low resistance tester is an intelligent, wide range, precise DC resistance testing instrument, which is suitable for copper resistance of transformer and inductance coil, contact resistance of relay, switch, contact resistance of connector, wire resistance, contact resistance of element solder, electric resistance of printed board and welding hole, metal flaw detection and so on. Used in the production line, you can use the HANDLER interface and GPIB interface (optional) good / bad product output signal, in order to improve the automation of production line testing ability.
Features
High measurement speed
Easy operation
Direct in reading
Highly precise and better cost effectiveness.
Minute extension
Application
The whole series of DC low resistance tester is stable and easy to use. It is suitable for copper resistance of transformer and inductance coil, contact resistance of relay, switch, contact resistance of connector, wire resistance, contact resistance of element welding spot, printed board line and welding hole resistance, metal flaw detection, etc
Specifications
Measurement range | 0.01 mΩ - 1.9999 KΩ |
Test current | 100 mA,10 mA,1 mA,100 μA,10 μA,1 μA |
Range | 20 mΩ, 200 mΩ, 2 Ω, 20 Ω, 200 Ω, 2 kΩ, |
Range resolution | 10 μΩ, 100 μΩ, 1 mΩ, 10 mΩ, 100 mΩ |
Measurement speed (meas /sec) | Fast: 10, Slow: 2.5 |
Ranging mode | Auto, Hold |
Trigger mode | Internal, Manual, External |
Function | Top/bottom limitation, pass or reject, ranged locking, reset and data protection for power down function |
Interface |
Standard Accessories | Options | ||
26004-1 | 4 terminal Kelvin test clip leads | 26009B | SMD test fixture |
power line | 26008A | SMD text box | |
Communication software customization |