Product Description


Technical drawing for 1000L /10HL conical beer fermenter

*Effective capacity:1000L 
*Total capacity:1300L
*Boundary dimension:φ1210×H2550
*Insulation:polyurethane
*Thickness:80mm
*Interior thickness:3mm
*Exterior thickness:2mm
*Manhole:Side/Top manhole
*Dimple plate cooling jacket on tank body and conical bottom
*Dished head and taper angle 60°
*Temperature sensor TP100
*Inner tank mechanical polishing and out plate surface protection ribbon polished on welds
*1pcs x Hops adding port
*1pcs x breathing valve
*1pcs x mechanical pressure regulation valve
*1pcs x sample valve *1pcs x racking arm
*1pcs x pressure gauge
*1pcs x CIP spray device
*1pcs x drain outlet bottom
*4 heavy duty legs with leveling pad
*Working pressure: 1bar

1.Polishing
-Inside Polishing: Overall polishing to 0.6μm without dead corner .
-Outside Polishing: Mirror polishing, smooth enough and passivating treatment.
-Purpose: Make sure the inner tank smooth enough to avoid form any dead cornor which caused bad taste in the wort beer. Outer
tanks looks more like an artwork.
2.100% WIG Welding
-All welding is TIG welding.
-All welding is Full welding.
-All welding is double side welding.
-Purpose: The use of argon on the protection of metal welding material, So that welding can not be in contact with oxygen in the
air, thus preventing the oxidation of welding consumables.Which Makes tanks durable and strong.