Automatic Online Carton Window Patcher
China Automatic Online Carton Window Patcher, Find details about China Carton Window Patcher, Paper Box Window Patcher from Automatic Online Carton Window Patcher
Basic Info.
Model NO.
RT600
Performance
Waterproof
Trademark
EcooGraphix
Origin
China
Model NO.
RT600
Performance
Waterproof
Trademark
EcooGraphix
Origin
China
Product Desciption
Automatic Carton Box Window Patching Machine
Film material:
Applicable to PET, PVC, PP, OPP, PE, Asha and even paper.
It can also be used for films with special effects such as light film, dumb film, flash film, colored film, printed film, UV filter film and fluorescent film.
Specifications:
The Gluing Section can be easily pulled out ,it's easy to set and clean.
The glue separation plate is adjustable to control the glue area and amount.
In case of the machine shutdown, the cylinder will lift the glue roller and then the machine will be driven by the other separate motor ,to avoid the leaking of the glue.
Option of pre-make ready table is available, Operator can set up the mould outside of the machine. It's convenient and time saving.
Belt speed can also be adjusted to be synchronized with the machine speed.
The characteristic of the belt lifting system is high speed thus increasing capacity.
The characteristic of the pilling lifting system is that the feeding belt can be run continuously while boxes can go through the upward/downward movable pilling lifting system. This pilling lifting system is flexible in capable of feeding different boxes without scratching the boxes.
The feeding system design is an advance technology. Synchronous belt feeder is equipped with suction system. At the chain adjusting section there are four feeding chains.
There is a feeding gate at the feeder which allows you to adjust upper rail without additional tool. This upper rail is made of flat steel and is connected to the middle part of the frame.
This system is reliable which ensure the registration of all, cardboard and chain is accurate.
Even when there is serious jam, the position is precise and you can use micro-adjustment to adjust.
Suction is run individually and registered by sensor. When there is blank sheet, the suction table will go down to avoid sticking of glue on the belt.
Operator can adjust the volume of suction air according to the size of the box.
The suction cylinder is made of special material. It is smooth so that the speed of patching is high and there will be no scratch on the plastic film.
When the knife cylinder is rolling, it intercrosses with another fixed knife bar and hence cutting the plastic film like "scissors". The cutting edge is flat and smooth.
The knife cylinder is with adjustable blowing or suction system to ensure the plastic film is patched on the window of the box accurately.
Film material:
Applicable to PET, PVC, PP, OPP, PE, Asha and even paper.
It can also be used for films with special effects such as light film, dumb film, flash film, colored film, printed film, UV filter film and fluorescent film.
Specifications:
| Model/Specification | RT-600 Automatic Window Patching Machine |
| Max.Paper size | (L)600×(W)520 |
| Min.Paper size | (W)80×(L)100mm |
| Max.Window size | (L)400×(W)400 |
| Min.Window size | (W)30×(L)45mm |
| Paper thickness | cardboard: 200gr/m2~2.000gr/m2 |
| corrugated board: from micro-flute~6mm thickness | |
| Film thickness | 0.03-0.2µm |
| Stickup Accuracy | (left/right)±0.5mm ;(top/bottom)±1mm |
| Machine size | (L)4500×(W)1500×(H)1700 |
| Net weight | 3300kg |
| Main power required | 3kw |
| Sizing roller power | 0.09kw |
| Delivery stacker power | 0.37kw |
1.Sizing Part(gluing):
The Gluing Section consists of the chrome-plated glue roller, glue separation plate, side guide and glue mould roller.The Gluing Section can be easily pulled out ,it's easy to set and clean.
The glue separation plate is adjustable to control the glue area and amount.
In case of the machine shutdown, the cylinder will lift the glue roller and then the machine will be driven by the other separate motor ,to avoid the leaking of the glue.
Option of pre-make ready table is available, Operator can set up the mould outside of the machine. It's convenient and time saving.
2.Paper collecting part (delivery stacker)
The belt at the Delivery Section is wide. Operator can adjust the height of the belt and the finished products are aligned in a straight line.Belt speed can also be adjusted to be synchronized with the machine speed.
3.Feeder part (paper feeding)
The machine is equipped with lower belt feeding system, with the choice of option which is pilling lifting system and belt lifting system.The characteristic of the belt lifting system is high speed thus increasing capacity.
The characteristic of the pilling lifting system is that the feeding belt can be run continuously while boxes can go through the upward/downward movable pilling lifting system. This pilling lifting system is flexible in capable of feeding different boxes without scratching the boxes.
The feeding system design is an advance technology. Synchronous belt feeder is equipped with suction system. At the chain adjusting section there are four feeding chains.
There is a feeding gate at the feeder which allows you to adjust upper rail without additional tool. This upper rail is made of flat steel and is connected to the middle part of the frame.
This system is reliable which ensure the registration of all, cardboard and chain is accurate.
Even when there is serious jam, the position is precise and you can use micro-adjustment to adjust.
4.Window patching part
Boxes are delivered from the gluing section to the window patching section by suction.Suction is run individually and registered by sensor. When there is blank sheet, the suction table will go down to avoid sticking of glue on the belt.
Operator can adjust the volume of suction air according to the size of the box.
The suction cylinder is made of special material. It is smooth so that the speed of patching is high and there will be no scratch on the plastic film.
When the knife cylinder is rolling, it intercrosses with another fixed knife bar and hence cutting the plastic film like "scissors". The cutting edge is flat and smooth.
The knife cylinder is with adjustable blowing or suction system to ensure the plastic film is patched on the window of the box accurately.
You Might Also Like
18.5mm Carbon/ High Carbon/ AISI1010/ 1045 / C15/ C85/C82b S......
Aluminum Casement Window, Various Opening Type, Customized D......
China Factory Scaffolding Ladder Price Electric Self Climbin......
Freight/Air Freight/Shipping Agent/Air Freight From China to......
Galvanized Steel Ball-Joint Handrail Stanchion Balustrade/Ga......
Turbocharger for HX35-L8264AC Cummins Truck 3536473 4035629
High Quality 30d SD DTY 350t Polyester Pongee for Garment Fa......
Bulletproof Sintered Black Silicon Carbide Sic Plate for Arm......
High Quality Custom Textile PU Thermal Press Metallic Vinyl ......
Mist Water Cooling System Condenser Chiller for Industrial R......
China Shandong Non-Woven Fabric Manufacturing Factory High Q......