sanitary pneumatic constant pressure valve/ pressure regulator/ pressure control valve

 
 
TECHNICAL PARAMETER:
Application:
This series valve is used to maintain a constant pressure of inlet or outlet.
The connection is flexible and with ideal mobility and cleaning performance. It is very easy to operate, maintenance, adjust.
 
 
Material:
material contact Steel parts:      Stainless 304\316L
valve core seal selection:a)soft seal:     EPDM. (standard)
                                                               SILICON, FDM, HNBR(CHOOSE).
                                               b)metal seal
 
 
Advantages:
Sealings:         Excellent acid-proof, alkali proof and high-temperature performance. a little degree of permanent compression deforms.
Investment forging valve plug: Pressure durability less than 1.2MPA,  metallographic structure better than casting ones.
Apparent design: Keep updated with international fashion style.
Cost performance: Impor substituted, cost saved and reiableoperation.
 
Connection types:
 
Welded.
Clamped
Screw or threaded
welded - screw
Flange
To assure the connection and substitution with imported facilities, all the connection styles withe pipe or equipment are made to DN11850, IDF / ISO, SMS 3A  international standard size.
 
 
Size: 
DIN:    DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100
3A:        3/4", 1", 1 1/2", 2", 2 1/2", 3", 4"
SMS:   19, 25, 32, 38, 51, 63, 76, 89, 102 
ISO:    ?19, ?25, ?32, ?38, ?51, ?63, ?76, ?89, ?102,

 
 
Surface treatment 
        surface treatment: sandblasting Ra≤1.6um
                                            cast sub-light Ra≤0.6um
        inside surface treatment: polishing Ra≤0.6um
 
Operation Type:
Pneumatic actuator:    stainless steel or plastic with a control box or not.
 
 
Features of Pneumatic actuator:
Normally opened: the spring is OPEN and pneumatic OFF
Normally closed: the spring is OFF and pneumatic OPEN
With signal feedback inductive provider/sensor for option
Compact appearance, small volume, large torque
Simple and convenient assembly
 
 
Technical Parameter:
OD Range:                            DN25~ DN65, 1"~ 8"
Anti-pressure:                       10Bar
Compressed Air supply:        MIN:4 BAR,    MAX:8BAR
Pneumatic Actuator torgne: 40Nm
Finishing degree:
              Cutting: Ra1.5 ~ 3.2um
              Polish:  Ra0.4~ 0.8um
 
Other information:
 
material pressure:≤10bar
temperature range:-10ºC~150ºC
compressed air pressure:0~8bar
 
Actuators use compressed air quality requirements
Compressed air connection: Air tube equipped with air connector R1/8"
Max Particle size:0.01mm
Max oil content:0.08ppm
Dew point: atmospheric temperature 10 ° Cor lower
Max water content:7.5g/kg