The cuvette is also called the absorption cell, the sample cell. Used to hold the reference solution, sample solution.
Compatible with spectroscopic instruments:such as photometers, bloodline analyzers Particle size analyzer, etc.,
quantitative and qualitative analysis of substances, widely used in chemical, metallurgical, medical, pharmaceutical, food,
environmental protection, power plants, water plants, Oil and other industries, departments and universities, research institutes,testing and etc. It is mainly a quartz cuvette fired from quartz powder, and also has a trace amount of Semi-micro, fluorescent and other cuvette appear.
 

1, Good thermal stability 2, Good light transmission performance 3, Good electrical insulation performance

1, High temperature resistance The softening point temperature of quartz glass is about 1730ºC. It can be used at 1100ºC for a long time, and the highest temperature can reach 1450ºC for a short time. 2, Corrosion resistance In addition to hydrofluoric acid, quartz glass almost does not react with other acid substances, and its acid resistance is 30 times that of ceramics and 150 times that of stainless steel. Especially, its chemical stability at high temperature is incomparable to any other engineering materials.

1. Adhesive: UV glue or AB glue bonding, cheap price, relatively low-end quality. Adhesive not temperature resistant, easy to melt, glass generally about 100 degrees. 2. Sintering: it is to use low melting point glass powder or quartz powder. After melting at a certain temperature, the quartz sheet is glued together with the quartz sheet. The temperature resistance and corrosion resistance will be much better. Glass material temperature 200-300 degrees, quartz material than glass about 200 degrees higher. But can not suddenly cool and heat up, easy to explode. 3. Integrated forming: he does not use any intermediary medium, he does not use glue nor low melting point quartz powder. It is direct glass with glass, so its temperature resistance and corrosion resistance will be better than other forming methods. And it can withstand high temperatures. It can be combined with other glass or quartz tubes and burned together. Glass material temperature 500-600 degrees, quartz material temperature 1000 degrees.

1.After the dish is used, it should be rinsed with proper solvent first, and be careful to wash both inside and outside. If the solvent is non-toxic, you can put half of the solvent into it, press both ends of the dish with your finger and shake it vigorously. The number of times should be no less than three times. 2. Then rinse with plenty of running water. This step is very important for aqueous and salt solutions. Of course, if you're using a solvent that's not hydrophilic, you can drop this step. 3. Finally, use deionized water to clean, and pay attention to wash both inside and outside. This step can also be abandoned if the solvent is not hydrophilic. 4. After washing, do not deliberately dry the color dish, put it in the color dish box, and do not cover it to dry naturally.
 

THE TRANSMISSION FEATURES OF LIANYUNGANG HIGHBORN COLORIMETRIC CELL GUARANTEED TRASMISSION VALUES ON EMPTY CELLS AND DEVIATIONS IN A MATCHED SET.

BAIBO is one of the leading high quality quartz glass and precise ceramics manufacturer and supplier in China.

HIGHBORN has always been a defining force in the sale and fabrication of quartz glass within the semi-conductor, chemical, solar energy and precise ceramics within semi-conductor , solar energy, textile, electronic, and laser industries.

Not only have we mastered the fabrication technology, our strength has always been based around listening to and understanding our customer's requirements and expectations.

Continuous improvement in all areas of our business is key to our grouth. What is equally important to us is maintaining in business, our inherent family values of trust, faimess and respect to our employees, suppliers and customers.

Q:Are you a trading company or a manufacturer?
A:We are professional manufacturer which has almost 13 years of experience in this industry.

Q:Can you produce according to the samples?
A:Yes,we can produce by your samples or technical drawings.

Q:Would it be possible for us to visit your factory?
A:Sure,we welcomed our customers visit our factory in any time.

Q:Will your company supply samples?
A:Yes,the sample expense will be deducted from the value of your order.

Q:What's your payment terms?
A:T/T, L/C, Western Union, Money Gram, are available for us.

Q:Delivery time for my order?
A:Within 7-15 working days for your sample order; 20 working days for your bulk order( It depends on the models and quantity you are going to order).