Products

Msd100 Series Motor Servo for CNC Milling Machine 3.8kw
Msd100 Series Motor Servo for CNC Milling Machine 3.8kw

Msd100 Series Motor Servo for CNC Milling Machine 3.8kw

China Msd100 Series Motor Servo for CNC Milling Machine 3.8kw, Find details about China Servo, Servo AC Electric Motror from Msd100 Series Motor Servo for CNC Milling Machine 3.8kw

Model NO.
MSD100
Starting Mode
Variable Frequency Starting
Certification
Ce
Using/Saving Temperature
0~+55°c/20~+85°c
Using/Saving Humidity
Less Than 90%Rh
Speed Control Range
3.513888889
Task
Program
Structure
Combination
Mathematical Model
Linear
Signal
Continuous
Condition
New
Customized
Non-Customized
Material
Aluminum Alloy
Trademark
Machtric
Transport Package
Standard Exported Packing
Specification
CE, ISO
Origin
China
Model NO.
MSD100
Starting Mode
Variable Frequency Starting
Certification
Ce
Using/Saving Temperature
0~+55°c/20~+85°c
Using/Saving Humidity
Less Than 90%Rh
Speed Control Range
3.513888889
Task
Program
Structure
Combination
Mathematical Model
Linear
Signal
Continuous
Condition
New
Customized
Non-Customized
Material
Aluminum Alloy
Trademark
Machtric
Transport Package
Standard Exported Packing
Specification
CE, ISO
Origin
China
 

Control ways		1.position control
2.speed control
3.torque control
4. Various combinations of control
Feedback type1. Incremental square wave
2.cosine type
3.others
Using conditionusing/saving temperature0~+55°C/20~+85°C
using/saving humidityless than 90%RH
Vibration resistance/Impact resistance4.9m/s2/19.6m/s2
Performancespeed control range3.513888889
Speed changing ratioload changing ratio 0-100% load:less than 0.01%
voltage ratiorated voltage ±10%: 0%(in the rated speed)
temperature changing ratio25±25°C: less than ±0.1%(in the rated speed)
Frequency performance1KHz(JL = JM)
Torque control accuracy±2%
Soft start time setting0~10s
Input signalspeed command and torque command inputcommand voltageDC 10V variable setting range/rated speed or rated torque;Input voltage:maximum,positive instruction when motor rotates in the positive direction
Input impedanceabout 14kΩ
the circuit time constantabout 47μs
Contact speed instructionRotation direction selectionusing P action signal input
Speed selectionusing/SPD-A/SPD-B/SPD-D to choose motor direction rotation speed
Performanceoffset setting0~450 r/min(Set the resolution 1 r/min)
feedback compensation0~100%(Set the resolution 1%)
positioning completed width setting0~250 instruction unit (Set the resolution 1 instruction unit)
Input signalinstruction pluseinput pluse kinds1. Symbol+pluse sequence 2. CW+CCW pluse sequence
3. phase difference is 2 phase pluse (A phase and B phase)
Input pluse statusDifferential drive(5V);
Open collector(5V, 12V, 24V)
Input pluse FrequencyDifferential drive: maximum 1MHz
open collector: maximum 200kHz
control signalclear signal(input pluse status is the same as instruction pluse)
position outputoutput statusAphase Bphase Zphase, Differential drive output
 requency division ratioany frequency division
input signal in ordercan conduct signal distribution's changeservo ON,P action (or control mode switch,switch the motor's positive rotation or reverse rotation by the internal speed setting,zero clamp,instruction pluse prohibited) prohibit positive drive(P-OT) prohibit reverse drive(N-OT),alarm reset,current limit at positive side, current limit at reverse side(Internal speed selection)
output signal in orderfixed outputservo alarm
can conduct signal distribution's changeselect 3 signals from positioning completed(same speed),motor rotating,servo ready,current limiting,speed limiting, release the brake,alarm,NEAR signal
Dynamic brake functionthe main power OFF,servo alarm,servo OFF, action when overtravel
The electronic gear0.001≤B/A≤4000
Protection functionover current,lack voltage,overload, abnormal regeneration,main circuit detection abnormal, Heat sink overheat,power lack phase,overflow,overspeed,encoder abnormal,avoid the out of control,CPU abnormal,position offset,others
Analog monitoring functionsbuilt-in analog monitoring connector that can observe speed,torque instruction
Speed: 1V corresponding to 1000r/min
Torque: 1V/100% rated torque
Position offset pluse:0.05V/1 instruction unit or 0.05V/100 instruction unit
Communication functioncommunication typeCAN, RS485, USB
Shaft address settingset according to the user parameters
1: N communicationRS-485 port can connect the maximum of 255 stations
Functionsstatus display,the user parameters setting Monitoring display,alarm tracking display,JOG operation and automatic tuning operation,speed,torque instruction signal,etc
Othersthe origin retrieval, the motor's automatic identification function. Power's high harmonic suppression


About us:
 
Quanzhou Machtric Automation Equipment Co., Ltd is a company who manage international High Tech Products in the guidance of International Business .  With the help of the Strength R&D, System Engineering , taking advantage of the its abundant international trade resources, we have solved many problems for different customers.  At the same time, we have managed many another famous foreign brand in multi-level.  We would like to be one of the most popular Industry Automation Solution Suppliers.  We try to provide wisdom, individual product solution. 
Our products:

1. Inverter series:

Vector series: Z900,  ,S2800E,S1100VG,S2200E, S3800E series

Universal series: S2800E, S1100VG,S900GS series, S2100S series 

Dedicated series: S100 Series, S200 series(circular knitting machine)
 
Mini Series  : S800E 

 
Why choose us
 
 
More than 15 years - we are more than 15 years professional manufacture frequency inverter
 
More than 50 countries- we exported our products to more than 50 countries all over the world.
 
Professional work team- we can accept OEM ODM
 
Powerful production capacity - we can offer a large quantity products each month.
 
Certification -we have passed CE
 
We offer 24 hours service
 
machtric.en.made-in-china.com 

You Might Also Like