Products

Vulcanizing Tank, Remold Tire Machine

China Vulcanizing Tank, Remold Tire Machine, Find details about China Remold Tire Machine, Vulcanizing Tank from Vulcanizing Tank, Remold Tire Machine

Model NO.
BJ-LF
Inflatable Type Grinding Machine
1 Set
Rubber Powder Collecting Tank
1 Set
Inflatable Tread Preesing Machine
1 Set
Rim Disassembling Machine
1 Set
Envelope Disassembly Machine
1 Set
Buffer Strip Extruder
1 Set
Rubber Cement Mixing Tank
1 Set
Multifunctional Tire Repairing Machine
1 Set
Trademark
BOJIA
Transport Package
Standard Export Packing
Specification
According to the customer requirment
Origin
Qingdao, China
HS Code
8477800
Model NO.
BJ-LF
Inflatable Type Grinding Machine
1 Set
Rubber Powder Collecting Tank
1 Set
Inflatable Tread Preesing Machine
1 Set
Rim Disassembling Machine
1 Set
Envelope Disassembly Machine
1 Set
Buffer Strip Extruder
1 Set
Rubber Cement Mixing Tank
1 Set
Multifunctional Tire Repairing Machine
1 Set
Trademark
BOJIA
Transport Package
Standard Export Packing
Specification
According to the customer requirment
Origin
Qingdao, China
HS Code
8477800
vulcanizing tank,remold tire machine

I. simple introduction
1. Collection of Casings 
Worn tyres are collected to select suitable casings for tyre retread. 
 
2. Initial Inspection 
Each tyre received in a retread plant is subjected to a rigorous visual inspection. Inspectors are assisted by the use of non-destructive sophisticated MELION inspection machine. 
 
3. Buffing After inspection
The tyre's old tread is mechanically removed on high speed buffers. MELION's buffers are extremely accurate and will remove the proper amount of old rubber while turning the tyre to an exact specified diameter and radius. 
 
4. Section Repairs & Skiving 
With advances in state-of-the-art repair materials and repair methods, many of these tyres can be routinely repaired and in most cases can be retreaded when the original tread is worn off. The repair station is where any surface injury is treated using effective material and tools for grinding and patching.
 
5. Cementing and Filling 
Even in small injuries it is critical that the injury is cleaned and filled. If this is not done, severe rust, separation and steel cable looseness could take tyre out of service. The injury should be inspected, and then cleaned out with a carbide cutter. After cementing the injury, a vulcanizing rubber stem should be applied to "fill" the injury. This would create a permanent repair that maximizes tyre life.
 
With MELION designed-and-built spray booth, your cementing operation can be executed in a clean, efficient & environmentally responsible manner.
 
6. Building - Tread Rubber
In the pre-cure system, the tread rubber has already been vulcanized with the new tread pattern design. The buffed tyre needs a thin layer of cushion gum to be wrapped around its crown area. The pre-cured tread rubber is then applied with the building machine. This is called the building process.
 
7.a) Enveloping & Rim Mounting  
 The built tyres are then mounted with envelops and rims to prepare them for curing. 
   b) or Double Envelope System
For enveloping, tyres are first fitted an outer envelope at the envelope-mounting table before the inner envelope is fitted into them. The enveloped tyres are then vacuumed out for preparation prior to curing. Modern plants have their casings hoisted by monorail systems. With professional planning from MELION engineers, you can be assured of workstations designed to maximize output and ease workflow. 
 
8. Curing by Chamber 
 The tyre is then placed in a curing chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.
 
Our wide engineering capabilities and experience enable MELION to build chambers to suit our clients' different preferences for size, steam heated, electric heated, or double heating system, semi-automatic and automatic chambers.
 
9. Final Inspection & Painting
The retreaded tyre is subjected to a final inspection. This inspection insures that only tyres that meet industry quality standards are allowed to leave the retread plant. All retreaded tyres are encouraged to be returned with the sidewalls painted using a light coat of black tyre paint. 


II. Configuration of Tire Retreading Production Line
1.Curing Chamber
NameSize(Diameter*length)Quantity of tire
 DN1500*15004 tires
 DN1500*20006 tires
 DN1500*30008 tires
 DN1500*350010 tires
 DN1500*400012 tires
 DN1500*500016 tires
FunctionThe tyre is then placed in a curing chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.
Power30kw-90kw
Heating MethodElectrical heating, thermal oil heating, steam heating

 2.Inflatable Tire Buffing Machine 
NameInflatable Contouring Grinding Machine/Buffing Machine
modelFXM-C
Scope of Application15",16",20",22.5"
Dimension1920x2150x1850
Weight1550KG
Technical parameter(1) grinding head motor power: 11KW
(2) Rotation tire matching power: 2.2kw
(3) Left-to-Right Limits Control Motor Power: 0.55KW
(4) ront-to-Rear Limits Control Motor Power: 0.37KW
Function(1) For tire tread surface radian grinding
(2) Engineered with tire shoulder side Buffer and tire explosion-proof function
 

 3. Tread Building Machine
NameInflatable Tread Press/Tread Building Machine
modelTBM-22.5
Scope of Application15",16",20",22.5"
Dimension1770x2000x2010mm
Weight900KG
Technical parameter(1) Working Pressure: 0.6Mpa
(2) Inflation Pressure: 0.15Mpa
(3) Roller Motor Power: RV63-0.55KW
(4) Chuck Plate Type: 15,16,20,22.5
Function(1) To press the new tread applied on old casing 
(2)mainly consists of Frame, Tread Press Motor, Tire Ejecting Motor, Air Cylinders, Pneumatic Components, Vacuum Chuck Plate and Electric Control Panel. 

4.Envelope disassembly machine
nameEnvelope disassembly machine
modelLJJ-A
specification15",16",20",22.5"
Outline size2.2x1.5x1.6M
weight350KG
FunctionFor envelope disassembly before and after tire vulcanization, applicable to many kinds of tire

5. Rim Dismounting Machine
NameRim Dismounting Machine
modelJZJ-22.5
specification15",16",20", 22.5"
Outline size1.5x1.3x0.8M
Weight100KG
FunctionFor disassembling of rim
 

 6.Outer Envelope Mounting Machine
nameOuter Enveloper
modelBZJ-22.5
specification15",16",20",22.5"
Outline size2.2x1.5x1.6M
weight350KG
FunctionFor envelope disassembly before and after tire vulcanization, applicable to many kinds of tire
 
III. picture show
Vulcanizing Tank, Remold Tire Machine
Vulcanizing Tank, Remold Tire Machine

IV. Our machine list
Our company professional manufacture rubber vulcanizing press (frame type,four column type,lab press and so on), rubber mixing mill, batch off cooler, rubber extruder, rubber strip making machine and tire recycling equipment.

 
 

You Might Also Like