Products

Marine 15ppm Bilge Alarm for Oil Water Monitor

China Marine 15ppm Bilge Alarm for Oil Water Monitor, Find details about China 15ppm Bilge Alarm, Marine 15ppm Bilge Alarm from Marine 15ppm Bilge Alarm for Oil Water Monitor

Model NO.
WT0507101
Trademark
WEITONG MARINE/OEM
Transport Package
Export Standard Packing or as Required
Specification
As per request
Origin
China
HS Code
8531100000
Model NO.
WT0507101
Trademark
WEITONG MARINE/OEM
Transport Package
Export Standard Packing or as Required
Specification
As per request
Origin
China
HS Code
8531100000
Marine 15PPM Bilge Alarm
Marine 15PPM Bilge Alarm device is designed in accordance with the International Maritime Organization MEPC. (49) resolution 107, approved by the China classification society (CCS) , is the latest generation monitiring instrument, applicable to ships, continuous monitoring of ship barge oil, with functions of 15 PPM transfinite alarm and control of oil conent. It is usually used with 15 PPM bilge oily water separator.
Function Test
1) Run oil free water through the instrument to purge the system.
2) Adjust the flow rate through the unit by using the small screws in the cell cap. Taking out a screw will increase the flow rate. NB: The flow rate should be checked on both, the clean water supply and the separator sample supply. If the clean water supply is obtained from a high pressure source, the flow rate will be higher than from the sample point. The flow rate is not influencing the accuracy of the instrument. The adjustment is only important for the time delay between the sample point and the monitor.
3) Switch on the instrument and make sure, that the Power LCD is illuminated and it displays the number "EE", with the fault LED on. Allow a few minutes for the system to warm up and stabilize. It works when the fault LED off and measure value displays.
4) The monitor will display "0" with clean water; if the value is higher than 0, it means there is air mixed up. Then it is necessary to check the entrance components and sample water pipeline and reset the position.
5) Through the front control panel offset to operate the display "0".
Marine 15PPM Bilge Alarm Main Performance Indicator
Range0-30mg/l (up to 50mg/l)
Accuracy>5mg/l
Linearity>2%
DisplayLCD
Voltage220VAC/110VAC ±10% 50Hz/60Hz 5%
Power10VA
Alarm Point1-15ppm
Factory Setting15ppm
Alarm outputTwo-way relay output
Alarm DisplayYellow LED
Size360mmW×240mmH×105mD
Protection ClassIP45
Weight7KG
ConnectionR 1/4"
StandardsIMO.Res.MEPC.107(49)Resolution
Quality Assurance and Service
1. Have a complete rigorous management, production and inspection processes to control the quality and avoid detail mistake
2. Design and produce ability
3. Rigorous inspection including incoming inspection, flaw detection etc., and double check is a must.
4. Advanced factory facility ensure
5. Response to any inquiry within 24 HRS with design or efficient solution from our engineer or tech supporter.
6. Provide professional customization service according to client's requirements
7. on time delivery, as we have rigorous production schedule and profession follow-up process
8. Moderate price and professional service

If you have any question or inquiry, please feel free to contact us for more details.
Ms Kate
Tel: +86-756-8169003
Phone: +86-13923317268
Website: weitongmarine.en.made-in-china.com
Other Products Photos

Marine 15ppm Bilge Alarm for Oil Water Monitor




















 

You Might Also Like