Products

High Wear Resistant Liners Al203 Alumina Ceramic Pipe Liners

China High Wear Resistant Liners Al203 Alumina Ceramic Pipe Liners, Find details about China Wear Resistance Liner, Ceramic Liner from High Wear Resistant Liners Al203 Alumina Ceramic Pipe Liners

Model NO.
ceramic liner
Density
3.62
Moh′s Scale
>9.0
Max Operation Temp.
1250
Trademark
XingFeng
Transport Package
Cartons, Palletized
Specification
150*150mm, 300*300mm, 500*500mm
Origin
China
HS Code
69091200
Model NO.
ceramic liner
Density
3.62
Moh′s Scale
>9.0
Max Operation Temp.
1250
Trademark
XingFeng
Transport Package
Cartons, Palletized
Specification
150*150mm, 300*300mm, 500*500mm
Origin
China
HS Code
69091200
Ceramic Sheet  High Wear Resistant Liners Al203 Alumina Ceramic Pipe Liners

Ceramic liner also called high alumina liner,wear resistance ceramic lining,ceramic sheet,alumina liner,alumina ceramic mosaic sheet,ceramic lining

Dimensions
Hex mosaic sheet:
12*3mm,12*6mm,12*12mm,12*20mm
 
Square mosaic sheet:
10*10*2mm,10*10*3mm,10*10*4mm,10*10*8mm,17.5*17.5*3-10mm,20*20*4mm,20*20*5mm,20*20*6mm,20*20*8mm,20*20*3-10mm
 
Ceramic mosaic sheet
150*150mm,300*300mm,500*500mm
 
 Technical Data
ItemUnitValue
Alumina content%92%, 95%
Densityg/cm3≥3.62
Moh's scale
(Vickers hardness)		g/mm2≥9.0(918)
Crush strenght20°C Mpa≥1.77
Bending strength20°C Mpa275
Max operation Temp.°C1250
 
Application:widely used in mining industry,coal industry,steel industry,conveying system and so on .It can effectively protect industry equipment from abrasion damange,and reduce the maintenance cost and down-time,standard alumina tiles including: ceramic plain plate ,alumina welded tile, taper tile liner,trapezoidal tile,curved tile ect .which are easily fixed and installed by end users .
 
Characteristics:
High hardness
Rockwell hardness is HRA80-90,next to diamond,higher than to wear resistant steel and stainless steel
Good abrasive & wear resistance
Equal to 266 times for manganese steel and 171.5 times for high cast iron.
The life span is more than 10times under same
Light weight
Density is 3.6g/cm3,half of steel,lower the load for device 
Strong bonding & high temperature resistance
At 350°C run for a long time and will not ageing.Max temperature for inorganic binder is 750°C.The indicators for bonding and temperature resistance is ahead in China.
 
Package:cartons

You Might Also Like