16" Electric Wall Fan with Remote Control for Cooling
China 16" Electric Wall Fan with Remote Control for Cooling, Find details and Price about China Stand Fan, Home Appliance Table Fan from 16" Electric Wall Fan with Remote Control for Cooling
Basic Info.
Model NO.
FW40-807R
Shipping
40hq Container
Quantity
1800PCS/ 40hq
Grill
Line Grill
Blades
5as Blades
Speed
3 Speed
Trademark
Flypon
Transport Package
Color Box/White Box/Brown Box
Specification
16inch
Origin
China
HS Code
8414519200
Model NO.
FW40-807R
Shipping
40hq Container
Quantity
1800PCS/ 40hq
Grill
Line Grill
Blades
5as Blades
Speed
3 Speed
Trademark
Flypon
Transport Package
Color Box/White Box/Brown Box
Specification
16inch
Origin
China
HS Code
8414519200
Product Desciption
16inch Wall Fan Descrition:
ASSEMBLY INSTRUCTIONS
BLADE AND GRILLES ASSEMBLY
1.Remove the spinner and the plastic nut from the front side of the motor shaft then tighten the plastic nut.
2.Discard PVC sleeve on shaft.Insert the blade into shaft,made sure the stopper pin is clipped in to the groove of the blade.Screw the spinner counter clockwise to tighten the blades.
3.Hold the front guard to make sure that the trade mark is level and that the front guard are centered over the rear guard.Then push all the safety clips firmly into place.
OPERATION INSTRUCTION
Speed control please use "speed "switch to turn on/off the fan and adjust the speed by push the swich to number indicating. 0-off 1-low 2-medium 3-high
OSCILIATION CONTROL
To make the fan oscillating,pres the oscillation knob located on the top of the motor housing.To get the directional airflow,press the oscillating knob.
TILTING CONTROL
Unscrew the tilting knob,adjust the fan head to the desirable angle by holding the fan head,then tighten the knob.
MAINTENANCE INSTRUCTIONS
The fan requires little maintenance.Do not try to fix it by yourself,refer it to qualified service personnel if service is required.
1.Before cleaning and assembling,do not plug the pins into the socket.
2.To ensure adequate air circulation to the motor,keep vents at the rear of the motor housing room dust,fluff and etc,A vacuum cleaner can not be used to clean these vents before unplug.Do not disassemble the fan to remove fluff.
3.Please wipe the exterior ports with a soft cloth soaking a mild detergent.Do not use any abrasive detergent or solvents to avoid scratching the surface.
4.Do not allow water or any other liquid in to the motor housing or interior parts.
5.If the power cord is damaged,it is strongly recommended to request a specialist to handle.
MOTOR
We choose the best motor to use!!
Workshop
Packing
Our Services
High quality because of attention to detail
1* Our factory machine using automatic production lines, the motors are more reliability and high-quality .
2* Low heat during operation, silent for a long time overload running, not hot, put an end to rust.
3* Compact design,beautiful shape and artful design,and also easy to take with.
4* Strong wind ,big motor,faster speed and 3 speed natural wind grade choices.
5* Security smart,safty switch and over temperature protection keep it more safty.
6* Low power ,environment friendly.
Company Information
Foshan Nanhai Feipeng Electrical Technology Co., LTD. is located in Foshan Guangdong China,which is specialized in R & D , production and operation in the line of electric fan , DC fan, heater and other household appliances. Sorts of the products have CB and CE approval certificated.
Lingfei covers an area of more than 30,000 square meters, has a spacious workshop, advanced testing equipment, as well as a team of professional engineers , technical personnel. Through ISO9001: 2000 management system and strict quality control system,IQC,PQC and FQC testing ensures that our products are defect free.
Ascribed to excellent quality and competivtive price, prompt delivery, our products have won a good reputation both at home and abroad.
"Products derived from technology", its the aim that we are always strive for, which make our products occupy the worldwide market rapidly.
If you are interested in our products,please do not hesitate to contact us.We assure that our abundant experiences in OEM and ODM can lead to mutual benefit in the near future.
FAQ
Q:How to contact us?
A: Sanjia Industrial Area, Xilian, Jinsha, Nanhai Area, Foshan, Guangdong, China (Mainland)Postcode:528200
tel:(86) 13425923808
| Product Name: | 16inch wall fan |
| Model No: | FW40-807 |
| Voltage: | 220V |
| Frequency: | 50Hz |
| Power: | 40W |
| Motor: | 66*16 Aluminum Motor or Copper Motor |
| Grill: | Line Grill |
| Blades: | 3PP blades |
| Plug: | two round Plug |
| Color: | Blue or according the order |
| Base: | plastic |
| Body: | New PP material |
| Height: | 40-50CM |
ASSEMBLY INSTRUCTIONS
BLADE AND GRILLES ASSEMBLY
1.Remove the spinner and the plastic nut from the front side of the motor shaft then tighten the plastic nut.
2.Discard PVC sleeve on shaft.Insert the blade into shaft,made sure the stopper pin is clipped in to the groove of the blade.Screw the spinner counter clockwise to tighten the blades.
3.Hold the front guard to make sure that the trade mark is level and that the front guard are centered over the rear guard.Then push all the safety clips firmly into place.
OPERATION INSTRUCTION
Speed control please use "speed "switch to turn on/off the fan and adjust the speed by push the swich to number indicating. 0-off 1-low 2-medium 3-high
OSCILIATION CONTROL
To make the fan oscillating,pres the oscillation knob located on the top of the motor housing.To get the directional airflow,press the oscillating knob.
TILTING CONTROL
Unscrew the tilting knob,adjust the fan head to the desirable angle by holding the fan head,then tighten the knob.
MAINTENANCE INSTRUCTIONS
The fan requires little maintenance.Do not try to fix it by yourself,refer it to qualified service personnel if service is required.
1.Before cleaning and assembling,do not plug the pins into the socket.
2.To ensure adequate air circulation to the motor,keep vents at the rear of the motor housing room dust,fluff and etc,A vacuum cleaner can not be used to clean these vents before unplug.Do not disassemble the fan to remove fluff.
3.Please wipe the exterior ports with a soft cloth soaking a mild detergent.Do not use any abrasive detergent or solvents to avoid scratching the surface.
4.Do not allow water or any other liquid in to the motor housing or interior parts.
5.If the power cord is damaged,it is strongly recommended to request a specialist to handle.
MOTOR
We choose the best motor to use!!
Workshop
Packing
| Carton | 1pcs/color/white/brown carton |
| Size | 43.5*19*43.5 |
| Container | 40hq |
| Quantity | 1900pcs/40hq |
Our Services
High quality because of attention to detail
1* Our factory machine using automatic production lines, the motors are more reliability and high-quality .
2* Low heat during operation, silent for a long time overload running, not hot, put an end to rust.
3* Compact design,beautiful shape and artful design,and also easy to take with.
4* Strong wind ,big motor,faster speed and 3 speed natural wind grade choices.
5* Security smart,safty switch and over temperature protection keep it more safty.
6* Low power ,environment friendly.
Company Information
Foshan Nanhai Feipeng Electrical Technology Co., LTD. is located in Foshan Guangdong China,which is specialized in R & D , production and operation in the line of electric fan , DC fan, heater and other household appliances. Sorts of the products have CB and CE approval certificated.
Lingfei covers an area of more than 30,000 square meters, has a spacious workshop, advanced testing equipment, as well as a team of professional engineers , technical personnel. Through ISO9001: 2000 management system and strict quality control system,IQC,PQC and FQC testing ensures that our products are defect free.
Ascribed to excellent quality and competivtive price, prompt delivery, our products have won a good reputation both at home and abroad.
"Products derived from technology", its the aim that we are always strive for, which make our products occupy the worldwide market rapidly.
If you are interested in our products,please do not hesitate to contact us.We assure that our abundant experiences in OEM and ODM can lead to mutual benefit in the near future.
FAQ
Q:How to contact us?
A: Sanjia Industrial Area, Xilian, Jinsha, Nanhai Area, Foshan, Guangdong, China (Mainland)Postcode:528200
tel:(86) 13425923808
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover