Warm Floor Heating Systems Ce and VDE Approved
China Warm Floor Heating Systems Ce and VDE Approved, Find details about China Warm Floor Heating Mats, Heating Systems from Warm Floor Heating Systems Ce and VDE Approved
Basic Info.
Model NO.
SHIHM-150w-230v
Material Shape
Round Wire
Range of Application
LSOH
Certification
ISO9001, CE, VDE
Brand
Senphus
Floor Heating Cable Color
White, Red, Yellow, etc. If You Need Other Color
Power
1m 10W-25W You Choose
Floor Heating Wire Cable Power
1 Square Meter 80W-200W You Choose
Cold Cable Length
2m, 3m, 4m, etc.
Electric Underfloor Heating Cable Models
3m, 5m, 7m, 9m, 15m, 20m, You Choose
Heating Cable Color
Blue, Orange, Red, Purple, Rose, etc
Trademark
SENPHUS
Transport Package
Caton-Woodcase-Pallet-Colourbox-White
Specification
0.5*2-0.5*24
Origin
China
HS Code
85168000
Model NO.
SHIHM-150w-230v
Material Shape
Round Wire
Range of Application
LSOH
Certification
ISO9001, CE, VDE
Brand
Senphus
Floor Heating Cable Color
White, Red, Yellow, etc. If You Need Other Color
Power
1m 10W-25W You Choose
Floor Heating Wire Cable Power
1 Square Meter 80W-200W You Choose
Cold Cable Length
2m, 3m, 4m, etc.
Electric Underfloor Heating Cable Models
3m, 5m, 7m, 9m, 15m, 20m, You Choose
Heating Cable Color
Blue, Orange, Red, Purple, Rose, etc
Trademark
SENPHUS
Transport Package
Caton-Woodcase-Pallet-Colourbox-White
Specification
0.5*2-0.5*24
Origin
China
HS Code
85168000
Product Desciption
Warm Floor Heating Systems CE and VDE approved
Senphus Group can produce all kinds of warm floor heating systems with different materials and many different equipments and machines.
Custom is welcome.
At present, we only offer installation service in China.
if you have large quantities, and we can offer free installation service in abroad
Installation advice
1.All electrical wiring must be done by a fully qualified electrician and in accordance with the current IEE.
2.The insulation Board must be installed if you have a wooden substrate.It is also commendatory with concrete substrates to optimize efficiency and reduce warming times(up to 50% more thermally efficient).
3.Always round down your floor space area e.g.2.6m²of floor will require 2m²of matting (To avoid surplus matting).
4.Never overlap the mat ,always ensure a min.50mm spacing between the wires for optimum heat distribution.
5.If there is a matting shortfall in your floor space then concentrate the heat mat in heavily trafficked areas.
6.A Residual Current Device (RCD) should be used with this system (must be bought separately).
7.Floor must be clean and free from dust &dirt.
8. Never cut the red wire or join two or more mats together in series, use a junction box.
Only use scissors when cutting the mesh.
9.The wire is tough but extra care must be taken when using sharp objects near the mat. A plastic trowel is advisable.
10.Check your system with a mufti-meter before tile installation.
11.Ensure your tile adhesive is suitable for use with under tile heating e.g.highly polymer modified (flexible).
Your substrate and floor covering,e.g.tile adhesive or screed, must be comm.\Katelyn dry before switching on your system for the first time.
Wear gloves when handing the mat (to avoid irritation to skin).
Take care when tiling to ensure you do not dislodge or damage the wire from the mesh mat.
The insulation board is not suitable for floor strengthening and structural reinforcing.
Matting and Insulation Board should not be passed under permanent fixings e.g.bath,toilet etc.
Do not store objects on top of the matting during installation e.g.tiles.
Remove old floor coverings
Senphus Group can produce all kinds of warm floor heating systems with different materials and many different equipments and machines.
Custom is welcome.
At present, we only offer installation service in China.
if you have large quantities, and we can offer free installation service in abroad
| Voltage | Square meters | Power | Ohm | Length(m) |
| 230V | 1 | 150 | 352.7 | 11.1 |
| 230V | 1.5 | 225 | 235.1 | 16.65 |
| 230V | 2 | 300 | 176.3 | 22.2 |
| 230V | 2.5 | 375 | 141.1 | 27.75 |
| 230V | 3 | 450 | 117.6 | 33.3 |
| 230V | 3.5 | 525 | 100.8 | 38.85 |
| 230V | 4 | 600 | 88.2 | 44.4 |
| 230V | 4.5 | 675 | 78.4 | 49.95 |
| 230V | 5 | 750 | 70.5 | 55.5 |
| 230V | 5.5 | 825 | 64.1 | 61.05 |
| 230V | 6 | 900 | 58.8 | 66.6 |
| 230V | 7 | 1050 | 50.4 | 77.7 |
| 230V | 8 | 1200 | 44.1 | 88.8 |
| 230V | 9 | 1350 | 39.2 | 99.9 |
| 230V | 10 | 1500 | 35.3 | 111 |
| 230V | 12 | 1800 | 29.4 | 133.2 |
Installation advice
1.All electrical wiring must be done by a fully qualified electrician and in accordance with the current IEE.
2.The insulation Board must be installed if you have a wooden substrate.It is also commendatory with concrete substrates to optimize efficiency and reduce warming times(up to 50% more thermally efficient).
3.Always round down your floor space area e.g.2.6m²of floor will require 2m²of matting (To avoid surplus matting).
4.Never overlap the mat ,always ensure a min.50mm spacing between the wires for optimum heat distribution.
5.If there is a matting shortfall in your floor space then concentrate the heat mat in heavily trafficked areas.
6.A Residual Current Device (RCD) should be used with this system (must be bought separately).
7.Floor must be clean and free from dust &dirt.
8. Never cut the red wire or join two or more mats together in series, use a junction box.
Only use scissors when cutting the mesh.
9.The wire is tough but extra care must be taken when using sharp objects near the mat. A plastic trowel is advisable.
10.Check your system with a mufti-meter before tile installation.
11.Ensure your tile adhesive is suitable for use with under tile heating e.g.highly polymer modified (flexible).
Your substrate and floor covering,e.g.tile adhesive or screed, must be comm.\Katelyn dry before switching on your system for the first time.
Wear gloves when handing the mat (to avoid irritation to skin).
Take care when tiling to ensure you do not dislodge or damage the wire from the mesh mat.
The insulation board is not suitable for floor strengthening and structural reinforcing.
Matting and Insulation Board should not be passed under permanent fixings e.g.bath,toilet etc.
Do not store objects on top of the matting during installation e.g.tiles.
Remove old floor coverings
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......