Products

17-4pH Precipitation Hardening Stainless Steel Round Bar Stock Uns630 S17400

China 17-4pH Precipitation Hardening Stainless Steel Round Bar Stock Uns630 S17400, Find details about China Stainless Steel Bar, Stainless Steel from 17-4pH Precipitation Hardening Stainless Steel Round Bar Stock Uns630 S17400

Model NO.
17-4PH
Surface Treatment
Bright
Trademark
ABOOM
Transport Package
Export Standard Package, Bundled or Be Required.
Specification
Diameter 0.1~500mm
Origin
China
HS Code
722220
Model NO.
17-4PH
Surface Treatment
Bright
Trademark
ABOOM
Transport Package
Export Standard Package, Bundled or Be Required.
Specification
Diameter 0.1~500mm
Origin
China
HS Code
722220

Product Description
Item
Stainless steel bar/rod
Standard
ASTM A479,ASTM A276,ASTM A484, ASTM A582, 
ASME SA276, ASME SA484, GB/T1220, GB4226, etc.
Material
301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202
321, 329, 347, 347H ,254SMO,201, 202, 410, 420, 430, S20100, S20200, S30100, S30400, S30403, S30908, S31008, S31600, S31635, etc.
Specifications
Round bar:Diameter 0.1~500mm
Angle bar:Size 0.5mm*4mm*4mm~20mm*400mm*400mm
Flat bar:Thickness 0.3~200mm        Width 1~2500mm
Square bar:Size 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Payment Term
A: 100% T/T advance. ( For small order<$5000.)B: 30% T/T and balance before shipping .C: 30% T/T advance, balance L/C at sight D:30% T/T , balance L/C usance E: 100% L/C usance.F: 100% L/C at sight.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CB


17-4PH Precipitation Hardening Stainless Steel Round Bar Stock UNS630 S17400

 

The 17-4PH alloy is a precipitation, quenched, martensitic stainless steel, and this grade has high strength, hardness (up to 300 0 C / 5000 C) and corrosion resistance. After heat treatment, the mechanical properties of the product are more complete, and it can reach compressive strength of up to 1100-1300 mpa (160-190 ksi). This grade cannot be used above 300 0C (572 0F) or very low temperature. It has good corrosion resistance to the atmosphere and diluted acids or salts. It has the same corrosion resistance as 304 and 430.

 

3/16"1/4"5/16"3/8"7/16"1/2"9/16"5/8"3/4"7/8"1"
4.8mm6.3mm7.9mm9.5mm11.1mm12.7mm14.3mm15.9mm19mm22.2mm25.4mm
 
1 1/8"1 1/4"1 1/2"1 3/4"2"2 1/4"2 1/2"2 3/4"3"3 1/2"4"
28.6mm31.8mm38.1mm44.5mm50.8mm57.2mm63.5mm69.9mm76.2mm88.9mm101.6mm

 

Application area:
Offshore platforms, helicopter decks, other platforms
food industry
Pulp and paper industry
Aerospace (turbine blades)
mechanical part
Nuclear waste barrel

 

 

Corrosion resistance:


The corrosion resistance of 17-4PH alloy is better than any other standard hardenable stainless steel plate. In most cases, its corrosion resistance is no less than 304.

If there is a risk of stress corrosion cracking, the higher maturation temperature must be higher than 550 ° C (1022 ° F), preferably 590 ° C (1094 ° F).

The optimum tempering temperature in chloride media is 550 ° C-1022 ° F.

The best tempering temperature in H2S media is 590 ° C-1094 ° F.

This alloy is susceptible to erosion or crack corrosion in static seawater.

It has the same corrosion resistance in the petrochemical, food processing and paper industries as the 304L grade.

 

chemical composition:

CCrNiCuNb/CbMn
0.0416.54.53.30.30.7
PREN (%Cr+3.3%Mo+16%N)≥17

Mechanical properties

HardenedYS 0.2%
N/mm		UTS
N/mm
Min.Typ.Min.Typ.
A1070120711701310
B7909319651034
HardenedYS 0.2%
ksi		UTS
ksi		 El%
Min.Typ.Min.Typ. Min.Typ.
A155175170190 814
B115135140150 1017

Hardened at 496 ° C (925 ° F)-4 hours-air cooled
Hardened 593 ° C (1100 ° F)-4 hours-air cooled
The above are two examples of heat treatment.

Room temperature characteristics


Resistivity: 80 μ * .cm
Specific heat capacity: 460 J.kg-1.K-1
Tension coefficient: 77 GPa
This alloy is magnetic.

Heat treatment
Anchor heat treatment
Martensite transformation
index
Ms: 130 ° C (266 ° F)
Mf: 30 ° C (86 ° F)

 

Solid solution annealing
1050 ° C +/- 25 ° C (1925 ° F + / -50 ° F) - 30 min up to 1 hour.
1050 ° C +/- 25 ° C (1925 ° F + / -50 ° F)-30 minutes-1 hour
Air-cooled / oil-quenched, below 25 ° C (76 ° F)

Aging / tempering
After heat treatment: 480 ° C (896 ° F)-1 hour-air-cooled for maximum mechanical properties.
At higher maturation temperatures of 620 ° C (1148 ° F), higher ductility can be obtained.
17-4pH Precipitation Hardening Stainless Steel Round Bar Stock Uns630 S17400

Hardness/Temperature tempered for 4 hours after austenitizing at 1040°C (1904°F) for 30 min quenched 100°C/sec (212°F/sec).

17-4pH Precipitation Hardening Stainless Steel Round Bar Stock Uns630 S1740017-4pH Precipitation Hardening Stainless Steel Round Bar Stock Uns630 S1740017-4pH Precipitation Hardening Stainless Steel Round Bar Stock Uns630 S1740017-4pH Precipitation Hardening Stainless Steel Round Bar Stock Uns630 S17400

You Might Also Like