Set of didactic equipment for the study of basic hydraulics, electro-hydraulics, proportional hydraulics and hydraulic regulation.
- Double-sided mobile workstation allows the assembly and operation of individual components without the use of tools (components equipped with quick assembly system)
The workstation must be equipped with:
 
-     1x Mobile cart on wheels with dimensions ±10:
·         length 1540mm,
.         height 1760mm
.         minimum depth 770mm
-     1x Double-sided plate for easy fixing of dimensioned components
·         length1080 mm minimum
.         depth 680 mm minimum
- 1x double-sided front panel for inserting electrical components
- 2x Fixed cabinet with at least 3 drawers
- 2x Rubber oil drip tray
- 1x Cable guide
- 1x Hose holder
Set of equipment for the study of hydraulics and electro-hydraulics
 
- 1x 4/2-way valve with manual operation and spring return
- 1x Manually operated 4/3-way valve, Y-center



development thinking, and improve practical ability and actual operation ability, so that students after graduation can directly production practice, shorten the past when they graduate students practical ability weak defect, so as to adapt to requirements of modern measurement and control.
This training system not only for students, but also for industrial electrical, mechanical and electrical integration engineering, electrical and mechanical equipment installation, power electrical and electronic equipment installation, automation processing, regulation and control technology and technical personnel, for machinery manufacturing and electrical engineer training, the process and the process management electrical engineer training is the same.
If there is no sensor, automation production will be very difficult, therefore, sensor technology is main technology to improve productivity .
This sensor training system is designed to make students realize sensor control technology in automation system of importance and learn to select appropriate sensor in application.
Factory sensor training system enable students understand different types of sensor's working principle and use method.

II.Technical paramter
1.Input power:~220V±10% 50Hz
2.Work environment: temperature -10ºC~+40ºC  humidity <85%(25ºC) 
3. Whole capacity:<0.2KVA
4. Weight<280Kg
5. Safety protection: with voltage leakage protection, current leakage protection, meet national standard.
6.Aluminum base panel with hanging box

III.The bench contains the following components:
Input dispositive including:

• Potentiometer (carbon slide, winded with slider)
• NTC thermistor
• Thermocouple (K , J or T)
•  Temperature sensor with integrated circuit
• Photoconductor cell
• Photovoltaic cell
• Phototransistor
• Photodiode PIN
• Deformation gauge
• Air flow sensor
• Air pressure sensor
• Inductive proximity sensor
• Hall effect sensor
• Tachymetric generator
• Hygrometric generator
• Ultra-sound receiver

• Heat element
• DC motor
• Electro-valve
• Ultra sound transmitter
• Relay, solenoid
• Counter/clock with light-emitting diode

• 3 electronic circuit (comparator / adder / integrator)
• Amplifier with gain and offset adjusting
• Measure amplifier
• AC current amplifier
• 40 kHz oscillator
• 40 kHz filter
• Low-pass filter with switchable time constant
• Full wave stabilizer for precision
• Sampling and maintain circuit
• Voltage/frequency and frequency/voltage converter
• Current/voltage and voltage/current converter
• 2 oscillator circuit (RC and Wien bridge)
• Power amplifier

Each element is equipped by connection terminals

Power supply delivering all needed power for different devices

4. Complete experiment
(1) cognitive experiment of various sensors
(2) amplifier band gain and offset correction experiment
Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate

Our products takes ISO9001 product management system.