China 4X10g SFP Ports + 48 RJ45 Ports Rack-Mount Layer 3 Managed Industrial Ethernet Network Switch, Find details and Price about China Network Switch, 48+4 Ports Network Switch from 4X10g SFP Ports + 48 RJ45 Ports Rack-Mount Layer 3 Managed Industrial Ethernet Network Switch
Software performance | |
Switch Function | Support VLAN, GVRP |
Support port speed limit, Support storm suppression | |
Support port aggregation, Support port flow control | |
Redundancy protocol | Support VRRP, EAPS |
Support MW-Ring ring network technology | |
Support MSTP/RSTP, compatible with STP | |
Multicast routing | Support IGMP v1/v2/v3, IGMP Snooping |
Support GMRP | |
Support for static multicast | |
Routing technology | Support RIPv1/v2, RIPng, OSPFv1/v2 |
Support static routing protocol | |
Support PIM-SM, PIM-DM | |
Service quality management | Support ACL to filter L2-L7 layer data |
Support SP, WRR queue scheduling | |
Management and maintenance | Support Console, Telnet, WEB management mode, RMON |
Support SNMPv1/v2c, which can be managed centrally through MWview | |
Support FTP, TFTP file transfer and software upgrade | |
Supports power failure alarms, power alarms, port alarms, and ring alarms. | |
Support port mirroring, Syslog, LLDP, RTC, SNTPv4 | |
IP supports DHCP server/relay/client | |
Technical specifications | |
Ethernet Standard | IEEE802.3-10BaseT |
IEEE802.3u-100BaseTX/100Base-FX | |
IEEE802.3x-Flow Control, IEEE802.3z-1000BaseLX | |
IEEE802.3ab-1000BaseTX, IEEE802.1ab | |
IEEE802.1D-Spanning Tree Protocol, IEEE802.1w-Rapid Spanning Tree Protocol | |
IEEE802.1Q -VLAN Tagging | |
IEEE802.1s Multiple Spanning Tree Protocol | |
IEEE802.1p -Class of Service | |
IEEE802.1X-Port Based Network Access Control GVRP, RIPv1/v2, OSPFv1/v2/v3, VRRP, DHCP, CLI, EAPS, Qos, LACP, LLDP, IGMP, PIM, SNMP, SNTP, SSH | |
Switch properties | |
Priority queue | 8 |
VLAN number | 4096 |
IGMO multicast groups | 1K |
MAC address | 64K |
Switch Bandwidth | 176Gbps |
Route Table | 16K |
Switch Delay | <5μs |
Interface | |
10-Gigabit ports | Port numbers: 4 |
Connector: SFP type Fx port | |
Baud rate:10G Base-Lx (Fx port) | |
Gigabit ports | Port numbers: 48 |
Connector: RJ45 adaptive Tx ports | |
Baud rate:1000Base-Lx ( Fx port), 10/100/1000M adaptive Tx port | |
Console port | RS232/RJ45 |
Terminal block for power input | 5.08mm terminal block |
Terminal block for relay alarm | 5.08mm terminal block,1A@24VDC |
Communication distance | |
Twisted-pair | 100m (standard CAT5/CAT5e cable) |
Multimode fiber | Gigabit multi mode: 850nm 550m |
Single mode fiber | Gigabit single mode: 1310nm 20km |
LED indicator lights | |
Front panel LED | Port light: LINK/ACT; SPEED |
Running light: RUN | |
Power LED: PWR1/ PWR2 | |
Alarm LED: AlARM | |
Back panel LED | RJ45 Tx port light: LINK/ACT; SPEED |
Fiber indicator: LINK/ACT | |
Power Requirements | |
Power input | AC/DC220V(85-264VAC/110-370VDC) |
Full-load consumption | <70W@full load |
Overload protection | Support |
Reverse protection | Support |
Redundancy protection | Support |
Working Environment | |
Operating Temperature | -10°C~60°C |
Ambient Humidity | 5%~95%( non-condensing) |
Physical Characteristics | |
Installation | 19" 2U rack mounted for front and rear outlet installation |
Dimension | 482.6mm*88mm*315mm (W*H*D) |
Industry standard | |
EMC | EN61000-4-2 (ESD), Level 4 |
EN61000-4-3 (RS), Level 4 | |
EN61000-4-4 (EFT), Level 4 | |
EN61000-4-5 (Surge), Level 4 | |
EN61000-4-6 (CS), Level 4 | |
EN61000-4-8, Level 5 | |
Impact | IEC60068-2-27 |
Falling | IEC60068-2-32 |
Shock | IEC60068-2-6 |
Warranty | |
Warranty | 5 Years |
Certification | |
Certification | CE,FCC,RoHS |
Ordering Information | |
TELCOM8052G-4XGF-48GT-AD220 | 4x10 Gigabit fiber ports +48 Gigabit RJ45 ports, layer 3 10G managed rack-mounted aggregation Ethernet switch |