Products

120inch Projection Screen 99 Points Finger Touch Interactive Whiteboard

China 120inch Projection Screen 99 Points Finger Touch Interactive Whiteboard, Find details about China Computer Smart Board, Educational Whiteboard from 120inch Projection Screen 99 Points Finger Touch Interactive Whiteboard

Model NO.
FT8
Calibration
Automatic / Manual (4/15 Points)
Multi-Touch
Ten Points Touch
Latency
<20ms
Minimum Active Size
40 Inch
Max Active Size
120inch( No Sunshine Room);100inch( Sunshine Room)
Technology
Laser Image Calibration Technology
Trademark
Oway
Transport Package
Box
Specification
0.5kg
Origin
China
HS Code
84716090
Model NO.
FT8
Calibration
Automatic / Manual (4/15 Points)
Multi-Touch
Ten Points Touch
Latency
<20ms
Minimum Active Size
40 Inch
Max Active Size
120inch( No Sunshine Room);100inch( Sunshine Room)
Technology
Laser Image Calibration Technology
Trademark
Oway
Transport Package
Box
Specification
0.5kg
Origin
China
HS Code
84716090
                                             FT8  Product Description
 
 

Laser Image Calibration Technology

Oway Finger touch portable interactive whiteboards includes with two parts: emitter and signal receiver. Emitter is fixed on flat surface. It emits infrared laser curtain on the surface which is about 1mm thick invisible light and parallel with the projection screen surface, 1-2mm above the screen surface. When the fingers or any non-transparent objects touch this virtual surface, the light will be reflected and detected by the signal receiver. Computer will figure out the position of the mouse by accurate calculating the reflected light position.


                       
                     120inch Projection Screen 99 Points Finger Touch Interactive Whiteboard
        
                   120inch Projection Screen 99 Points Finger Touch Interactive Whiteboard

     
                       120inch Projection Screen 99 Points Finger Touch Interactive Whiteboard







Function and features introduction
 
  1. High stability: Use the advanced algorithm to avoid the affect of the light.
  2. Requirement for the board: The only requirement for the board or wall is flat and evenness. The board can be with the frame. The projection screen can closer to the frame, even in the edges of the frame, the finger touch product can work well.
  3. Support plenty of gesture recognition: write with single finger; move with two fingers; eraser with palm; two fingers for zoom in& zoom out; two fingers work as scroll bar and so on.
  4. auto calibration. Infrared technology and Optical technology only support manual calibration. Our auto calibration is much more accuracy and easier to operate.
  5. Support 10 points finger touch (10 people can write together)
  6. Support Larger active size: support 40-100" for the room with sunlight (if the room without sunlight, it can support the active size of 40-120".
  7. Portable, high integration and easy to install: Total weight is only around 500g. The installation is very easy, just need to put the emitter part on the upper of projection Screen, and the sensor mounted to projector or ceiling, No skill needed.
  8. Sensor with the flash chips: don't need to calibration if you change the computer with the same resolution ratio. It save time, and make the use easier.
  9. The product is smaller. Emitter part size is 3.5cm x 17cm x 2.4cm; it can put on the board directly.
  10. remote control: remote control the emitter on/off.
  11. Sensor's filter with Auto push-pull device: When do auto calibration, the filter will be open; after calibration, the filter will be closed automatically. Such action makes the product more stable to defense the interference light, and the auto calibration success easier.
  12. Turn common board or wall to touch board. It can turn any flat surface (whiteboard, wall and so on) into finger touchable.
  13. Any non-transparent object can be used as pen, like a rolled paper. In any active area, any non-transparent object can work instead of the pen and the mouse.

120inch Projection Screen 99 Points Finger Touch Interactive Whiteboard
120inch Projection Screen 99 Points Finger Touch Interactive Whiteboard

 
Installation:

FT6 is small and easy to install.It doesn't require professional technology.
Just install the laser emitter in the middle area above the whiteboard and put the signal receiver on the projector.


 

Packing & Delivery
Packaging Details:Single box + carton or customer specified box
Delivery Time:3 working days

120inch Projection Screen 99 Points Finger Touch Interactive Whiteboard



FAQ
 Why the software can't save setting and calibration?
•Windows 7 64bit & Vista 64bit :
Close the UAC or Right click SmartIWB and select "Run as Administrator"
•Windows 8:
Right click SmartIWB and select "Run as Administrator"






Welcome to ask us to get a price list:
Oway Group Limited
Ms. Emma Wang
Mobile: +86-17096731011

 

Welcome to visit our company website owaysmartboard.en.made-in-china.com
Product demo on You Tube:
https://owaysmartboard.en.made-in-china.com

You Might Also Like