Underground Basement Construction Pre-Applied Self Adhesive HDPE Waterproof Membrane
China Underground Basement Construction Pre-Applied Self Adhesive HDPE Waterproof Membrane, Find details about China HDPE Waterproof Membrane, Pre-Applied HDPE from Underground Basement Construction Pre-Applied Self Adhesive HDPE Waterproof Membrane
Basic Info.
Model NO.
JLY-SH001
Ceiling Tile Type
HDPE
Surface Treatment
Roll Coated
Function
Fireproof, Sound-Absorbing, Waterproof
Certification
ISO, MSDS, CE
Color
White
Usage
Outdoor, Indoor
Product Name
Pre-Applied Self Adhesive HDPE Waterproof Membrane
Surface Material
Sands ,
Features
UV Resistance, Long Service Life, Easy Apply
Application
Tunnel ,Underground,Cave,Bridge,Roof
Trademark
Jin Lu Yang
Transport Package
Woven Bag
Specification
1m, 2m
Origin
China
Model NO.
JLY-SH001
Ceiling Tile Type
HDPE
Surface Treatment
Roll Coated
Function
Fireproof, Sound-Absorbing, Waterproof
Certification
ISO, MSDS, CE
Color
White
Usage
Outdoor, Indoor
Product Name
Pre-Applied Self Adhesive HDPE Waterproof Membrane
Surface Material
Sands ,
Features
UV Resistance, Long Service Life, Easy Apply
Application
Tunnel ,Underground,Cave,Bridge,Roof
Trademark
Jin Lu Yang
Transport Package
Woven Bag
Specification
1m, 2m
Origin
China
Package size per unit product
200.00cm * 20.00cm * 20.00cm
Gross weight per unit product
80.000kg
Product Desciption
underground basement construction pre-applied self adhesive hdpe waterproof membrane
Introduction
Self adhesive EVA/HDPE pre applied waterproof membrane is based on high polymer materials and coated with a non-bitumen environmental friendly polymer self-adhesive layer ,it is widely used in underground project, it can bond with concrete layer tightly.
Specification
Features
1.Good bonding with concrete applied on membrane, to block water between membrane and concrete further to protect concrete effectively.
2.Low flatness requirement to substrate, reliable overlapping; mechanical fixing, easy application.
3. Good puncture resistance performance.
4.Adaptable to settlement and distortion.
5.Weather resistance and anti-UV.
6.Resist to acid, alkali, mold.
7.Eco-friendly material
Application
1.Basement , Subway , Tunnel , Cave and Other underground public constructions
Introduction
Self adhesive EVA/HDPE pre applied waterproof membrane is based on high polymer materials and coated with a non-bitumen environmental friendly polymer self-adhesive layer ,it is widely used in underground project, it can bond with concrete layer tightly.
Specification
| Product | High polymer self adhesive hdpe waterproof membrane |
| Width | 1m , 2m |
| Length | 20m |
| Thickness | 1.2mm , 1.5mm , 1.8mm , 2.0mm |
| Surface material | white sand , color sand , self adhesive layer |
| Color | white |
Features
1.Good bonding with concrete applied on membrane, to block water between membrane and concrete further to protect concrete effectively.
2.Low flatness requirement to substrate, reliable overlapping; mechanical fixing, easy application.
3. Good puncture resistance performance.
4.Adaptable to settlement and distortion.
5.Weather resistance and anti-UV.
6.Resist to acid, alkali, mold.
7.Eco-friendly material
Application
1.Basement , Subway , Tunnel , Cave and Other underground public constructions
2.The roofing of industrial and civil building :planting roof, flat roof ,pitched roof
3.Artificial lake , reservoir ,landfill ,basement ,grain depot , etc
Installation
1. Substrate preparation
Remove all protrusions and clean up the substrate
2. Install membrane(loosely laid)
Loosely lay the membranes onto the substrate (ensure the adhesive side to face upward)
3. Rolls Overlapping
(1) Cut edges
Tear down the release film, adhere adjacent membranes together, then using tools to press overlapping area to insure firm bonding (if you need, heat the overlapping area, then proceed with overlapping)
(2) Roll end laps
Position special tape strip of appropriate sizes over the lap of beneath membrane, then melt the strip using hot-air welding gun and immediately overlap the adjacent membranes together. Press firmly over lapping area to achieve seamless joints.
4. Tie up reinforcement ,cast concrete and proceed with other subsequent architectural jobs.
Factory
Contact Us
Installation
1. Substrate preparation
Remove all protrusions and clean up the substrate
2. Install membrane(loosely laid)
Loosely lay the membranes onto the substrate (ensure the adhesive side to face upward)
3. Rolls Overlapping
(1) Cut edges
Tear down the release film, adhere adjacent membranes together, then using tools to press overlapping area to insure firm bonding (if you need, heat the overlapping area, then proceed with overlapping)
(2) Roll end laps
Position special tape strip of appropriate sizes over the lap of beneath membrane, then melt the strip using hot-air welding gun and immediately overlap the adjacent membranes together. Press firmly over lapping area to achieve seamless joints.
4. Tie up reinforcement ,cast concrete and proceed with other subsequent architectural jobs.
Factory
Contact Us
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine