The Electret Masterbatch 
In view of the mask material USES melt-blown cloth special requirements, worship, successfully developed a new material and good spinnability, high charge storage rate, strong persistence, wet and heat resistance of composite functional in muli, USES the advanced mixing extrusion process, the high flow melt-blown material production technology combined with in a function, and use the shear rheological ultra dispersion technology, developed the electret in resin can reach nanoscale (100 nm) or less dispersed electret masterbatch-ZJ-01.

Note:these specifications can be modified according to customer's requirements

The electret master zj-01 has the function of long-term charge storage. During electret discharge, the charge storage rate in the melt spraying cloth can be greatly improved, and the filtration efficiency is higher than that of the melt spraying cloth without electret master zj-01.The electret of nanometer scale in melt spraying cloth is evenly dispersed, which greatly improves the charge storage rate and can be stored for a long time and slowly

Release the released charge, and effectively resist the damage of the external high temperature and high humidity environment on the charge, delay the charge decay,

Effectively improve the filtration efficiency of melt-spraying cloth, so that the mask and other protective equipment in 1-2 years of shelf life to meet the qualified product detection indicators.

The melt spraying cloth of electrode master zj-01 is added, which can effectively increase the capacity of electrostatic adsorption and negative ion sterilization of masks and other products, and effectively block micro-nano droplets, dust and viruses.The results show that the electret effect is greatly improved after the use of zj-01 electrospray electret masterbatch

The antimicrobial activity was significantly improved.And in the high temperature (50 to 80ºC), humidity (30 to 50 rh) treatment for 4-8 hours, the filtration efficiency can still reach more than 90%, far better than the ordinary melt spraying cloth products.

Packing:
The packing is 25KG per bag, Paper-plastic compound bag outer, please store in teh dry place.


   Outer Packing                                  Inner  Packing                                           25kg/bag

Melt spray electret material -- ZJ-01 and melt spray PP raw material are mixed evenly in accordance with the ratio of 1.0 to 4.0wt% and then directly processed by melt spray spinning.The proportion of 4.0wt% is added online. Due to the different fineness and accumulation density of the melt spraying cloth fiber produced by each melt spraying line and the different discharge efficiency of electret equipment, the customer can increase or decrease the dosage of ZJ-01 according to the specific situation to achieve the best application effect

Testing Equipment 



Notice