Products

10kv 1kw DC Regulated High Voltage Power Supply

China 10kv 1kw DC Regulated High Voltage Power Supply, Find details about China High Voltage Power Supply, High Voltage Test Power Supply from 10kv 1kw DC Regulated High Voltage Power Supply

Model NO.
LTP-220VAC-(N/P)1KW-10KV
Voltage Regulating Mode
Frequency Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
One-way Transmission
Modulation System
PFM
Brand
Idealtek
Output Voltage
0 ~ 10kv
Output Current
0 ~ 100mA
Output Polarity
Positive or Negative
Application
Hipot Test, Withstand Voltage Test, Piezoelectric
Working Mode
Constant Voltage / Constant Current
Output Setting
10-Turn Potentiometer
Output Display
LED
Protection
Ovp, Ocp, Short Circuit and Load Discharging
Remote Control
0~10V / 4~20mA Analog Signal Control / RS Ports
Cooling Method
Forced-Air Cooling
Trademark
iDealTeknic
Transport Package
Plywood Case
Specification
IGBT & HF transformer
Origin
China
HS Code
85044019
Model NO.
LTP-220VAC-(N/P)1KW-10KV
Voltage Regulating Mode
Frequency Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
One-way Transmission
Modulation System
PFM
Brand
Idealtek
Output Voltage
0 ~ 10kv
Output Current
0 ~ 100mA
Output Polarity
Positive or Negative
Application
Hipot Test, Withstand Voltage Test, Piezoelectric
Working Mode
Constant Voltage / Constant Current
Output Setting
10-Turn Potentiometer
Output Display
LED
Protection
Ovp, Ocp, Short Circuit and Load Discharging
Remote Control
0~10V / 4~20mA Analog Signal Control / RS Ports
Cooling Method
Forced-Air Cooling
Trademark
iDealTeknic
Transport Package
Plywood Case
Specification
IGBT & HF transformer
Origin
China
HS Code
85044019
LTP Series High voltage DC Power Supply
Model: LTP-220VAC-(N/P)1KW-10KV
  1. Power range: 1KW
  2. Voltage range: 0 ~ 10KV
  3. Current range: 0 ~ 100mA
  4. 2U / 19-inch standard chassis
  5. Precise voltage and current setting and measurement capabilities
  6. OVP, OCP, short circuit and load discharging protections etc.
10kv 1kw DC Regulated High Voltage Power Supply
10kv 1kw DC Regulated High Voltage Power Supply
Overview
LTP series is high voltage power supply designed for high voltage experimental test needs with single-phase 220Vac±10% input.
Its maximum output power can reach 1000W and the maximum output voltage can reach 40kV, it is featured for stable & accurate output and low output ripple.
Comparing with the traditional linear HV power supply, its high-frequency switching technology can achieve faster response rate and higher efficiency with smaller size and light weight.
It is a best choice for HV laboratory testing, product testing and other HV applications.
Features
  1. CV/CC working modes.
  2. Output voltage & current adjustable from 0 to 100%
  3. Stable & Low ripple HV output.
  4. 4-digit LED digital meters display.
  5. Perfect & Complete protection functions
  6. Compact structure, small size and light weight.
Optional functions
  1. High output precision up to 0.1% (+0.1%)
  2. 0 ~ 10V analog signal control (standard DB interface) (+AC)
  3. RS communication interface (RS232 / RS485 optional) (+RC)
Specifications
InputVoltageSingle-phase 220V±10%
Frequency50Hz/60Hz
OutputRated power1000W
Output voltage adjusting range10KV
Output current adjusting range0A ~ 100mA
Output polarityPositive or Negative (both available)
Client must choose one output polarity before ordering.
Output connectionHV connector made by IdealTek.
Output cableHV cable, 1.5m long provided.
Line regulation0.5% for no load to full load at output.
Load regulation0.5% for ±10% change in input voltage.
Ripple (Vr.m.s.)≤0.5%@ rated output.
Efficiency≥85%
Setting & DisplayOutput control mode10-turn potentiometer on front panel.
Display mode41/2 LED digital display
Protection & Monitoring functionsLoad discharging protectionWhen the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated.
Short circuit protectionWhen a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage.
Over current protectionWhen the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases.
Over voltage protectionWhen the power supply is unloaded, the power supply works in constant voltage mode to prevent power supply from overvoltage damage.
Noise≤55dB
Protection degreeIP20
Cooling methodForced air cooling
MTBF50000 hours @ 25ºC
Working environment conditionsAmbient temperature10ºC~40ºC
Humidity10%~90%(non-condensing)
Height≤2000m
Storage environment conditionsAmbient temperature-20ºC~60ºC
Humidity10%~90%(non-condensing)
Height≤4000m
Size (W*H*D) (mm)200*100*300 (≤100W)
500*88*600 (19'' 2U standard chassis) (>100W)
Note: every power supply has 48 hours full load burn-in test @ 40ºC
Safety caution
  1. This power module has HV output, only professional person could operate it.
  2. Please check power module as below before start-up.
  3. Keep power module clean and good ventilation.
  4. HV input & output connectors or HV load no touch anything.
  5. Please check back current of load well connected with GND bolt at the back of power module.
Drawings (for reference only)
2U chassis (>100W) (RAL7035)
10kv 1kw DC Regulated High Voltage Power Supply
10kv 1kw DC Regulated High Voltage Power Supply
2U chassis (>100W) (Black)
10kv 1kw DC Regulated High Voltage Power Supply
10kv 1kw DC Regulated High Voltage Power Supply

You Might Also Like