China Automatic Screw Oil Extractor Sesame Sunflower Walnut Oil Processing Machine, Find details about China Oil Expeller, Oil Extractor from Automatic Screw Oil Extractor Sesame Sunflower Walnut Oil Processing Machine
1. The automatic hydraulic oil press is a small oil press with simple operation, high oil output rate and less replacement of wearing parts. It is an advanced equipment for manual operation of replacing small grinding
sesame oil. (2-8 kg / time), short time (8 - l2 minutes / time). The main processing oil crops of this machine are: sesame, walnut kernel, tea seed, pine seed (good peeling effect), almond and other high oil crops.
2. Squeezing range: all oil-bearing crops.Such as sunflower seeds,peanuts, soybean, rapeseed, sesame seed, walnut, almond, multiple cro pping oil seeds, cottonseed, prickly ash seed, phoenix tree seed, beans, peas,
garbanzo beans, and seeds of argan,nuts of apricot and so on, castor etc.
3.The whole machine is mainly composed of three parts:
1. Main body 2. Transmission hydraulic pressure 3. Electrical control is described
1) Main body part: It is made up of bottom plate, column, upper slab, squeegee assembly, connection Oil pan, nut and other parts are one of the main parts of the whole machine. The oil is pushed in the press assembly and pushed upward by the force of the cylinder assembly. The oil flows down from the squeezed oil flow joint and passes through the oil pan. Oil storage tank.
2) Transmission hydraulic part: This is the main working power source for the production of high oil rate.
It is driven by transmission shaft, worm gear, worm, gear pump, high pressure pump, overflow valve, manual
control valve, cylinder assembly and pipe joint. And other parts.This machine adopts advanced hydraulic pump
station-Korea three-piston pump station.Compared with domestic two-piston pump, it has low speed, high oil pressure and high temperature resistance. It can work continuously without oil cooling device above 65 degrees oil temperature.
3) Electrical control part: This is the advanced position of this machine, it consists of motor,voltmeter, temperature
control adjustment table, pressure gauge, power insurance and other components.
Technical Parameter:
Model | Motor Power | Working Pressure | Nominal Pressure | Temperature controls of heating ring | Input material | Size mm | Weight |
BC-180 | 1.5kw | 55Mpa | 1600KN | 70~100ºC | 3.5 kg | 800*650*1100 | 530kgs |
BC-230 | 1.5kw | 55Mpa | 2200KN | 70~100ºC | 7.5 kg | 900*750*1400 | 880kgs |
BC-320 | 2.2kw | 55Mpa | 3000KN | 70~100ºC | 15 kg | 1100*1000*1500 | 1320kgs |
1. This machine is small in size, small in floor space, easy to learn, easy to understand, easy to operate, no special requirements for operators.
2. During the use of this machine, the power consumption is low, and various expenses are small.
3. Compared with stone grinding, save power by 50%.
4. This machine belongs to hydraulic machine with high pressure, high oil yield and good oil quality.
5. This machine adopts automatic control system, preheating temperature automatic control and hydraulic system pressure automatic control.
6. The main components of the machine are made of imported high-quality silicon-manganese steel, equipped with CNC precision lathe and modern high-tech processing. The performance of the whole machine is good.