YF series Air Filter is recommended for the industries in automation, cosmetics, blow molding, spraying etc.What's YUKA Advatage?1. Compressed air National standard founder;
2. Build a laboratory with Wuhan University;
3. With many patents and strong R&D ability;
4. Advanced thread processing technology and testing equipmentWhat's YUKA's Product Advatage?a.15 years serve life for filter housing under working condition from temperature 1.5~80ºC.Maxi. Pressure is 1.0Mpa.
b. 6000~8000 hours serve life for filter element,filtering performance up to 99%c. Integrated die-casting filter up to 4 inch,flow rate up to 48m³/min;d. Effectively filter solid particles up to 0.01 microns, suspended oil up to 0.003 mg/m3;e. 7 filter element filter levels to meet different needs;f. Surface anti-corrosion treatment increases wear resistance and the corrosion of the shell is low;g. Equipped with an external drain to effectively remove condensate;h. Sight Glass shows the drainage inside the filter;i. The presence of a pressure indicator indicates when the filter element should be replaced;j. The filter element can be replaced without the intervention of third-party personnel and special tools; Ability to install filters on the wall;k.Less pressure drop when the airflow passes. Grade | Particle removal | Outlet oil aerosol concentration | Filtration performance of Particle | Filtration performance of oil | Element spanlife | Airflow direction | Precede with |
PF | 5μm | 5mg/m³ | - | 50% | 6000 hours | From inside to outside | Before refrigerated dryer |
AO | 1μm | 0.6mg/m³ | 99.999+% | 80+% | 6000 hours | after air dryer |
AA | 0.01μm | <0.01mg/m³ | 99.999+% | 99.9+% | 6000 hours | after AO |
AX | 0.01μm | <0.001mg/m³ | 99.999+% | 99.99+% | 6000 hours | after AA |
ACS | - | <0.004mg/m³ | 99.999+% | - | 2000-3000 hours | before AX |
AR | 1μm | - | 99.999+% | - | 4000-6000 hours | From outside to inside | after desiccant dryer |
AAR | 0.01μm | - | 99.999+% | - | 4000-6000 hours | after AR |
International test and measurement standard ISO12500>ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. The main performance
parameters are the air inlet oil content and particles size distribution of the solid particles.
>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.Product are test with the international advanced testing equipment based on standard ISO12500, Which is equivalent to the standard ISO8573.1-2010 quality standard, and provide filter performance test report.
Filtration Grade | PF | AO | AA | AX | ACS | AR | AAR |
Size of solid particles(ISO12500-3) | 5μm | 1μm | 0.01μm | 0.01μm | - | 1μm | 0.01μm |
Filtration performance of solid particles(ISO12500-3) | - | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% |
Filtration performance of oil(ISO12500-1) | 50% | 80+% | 99.9+% | 99.99+% | - | - | - |
Residual oil content(ISO12500-1) | 5mg/m³ | 0.6mg/m³ | <0.01mg/m³ | <0.001mg/m³ | <0.004mg/m³ | - | - |
Technical SpecificationThe flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g).
For application in other working pressure, please refer to the correction factors.Model | Pipe size | Flow rates | Dimension (mm) |
L/S | m3/min | scfm | W(Width) | D(Depth) | H(Height) | A | B | C(clearance for housing) |
YF010 | RC1/2" | 16.7 | 1.0 | 35.3 | 96 | 79 | 261 | 29 | 198 | 118 |
YF020 | RC3/4" | 25.0 | 1.5 | 53.0 | 96 | 79 | 261 | 29 | 198 | 118 |
YF030 | RC3/4" | 30.0 | 1.8 | 63.6 | 96 | 79 | 295 | 29 | 233 | 153 |
YF040 | RC1" | 33.3 | 2.0 | 71.0 | 96 | 79 | 295 | 29 | 233 | 153 |
YF060 | RC1" | 60.0 | 3.6 | 127.0 | 138 | 111 | 403 | 37 | 296 | 208 |
YF070 | RC1" | 83.3 | 5.0 | 177.0 | 138 | 111 | 503 | 37 | 396 | 303 |
YF080 | RC1-1/2" | 125.0 | 7.5 | 265.0 | 138 | 111 | 503 | 37 | 396 | 303 |
YF090 | RC2" | 166.7 | 10.0 | 353.1 | 174 | 142 | 736 | 58 | 607 | 469 |
YF100 | RC2-1/2" | 216.7 | 13.0 | 459.0 | 174 | 142 | 736 | 58 | 607 | 469 |
YF110 | RC2" | 283.3 | 17.0 | 600.0 | 174 | 142 | 1016 | 58 | 887 | 794 |
YF120 | RC2-1/2" | 316.7 | 19.0 | 671.0 | 174 | 142 | 1016 | 58 | 887 | 794 |
YF130 | RC3" | 416.7 | 25.0 | 883.0 | 220 | 184 | 793 | 74 | 649 | 514 |
YF140 | RC4" | 466.7 | 28.0 | 989.0 | 220 | 184 | 793 | 74 | 649 | 514 |
YF150 | RC3" | 683.3 | 41.0 | 1448.0 | 220 | 184 | 1050 | 74 | 906 | 764 |
YF160 | RC4" | 800.0 | 48.0 | 1695.0 | 220 | 184 | 1050 | 74 | 906 | 764 |
Technical requirements | Maximum operating pressure: 10 barg Operating temperature: 1.5°C~80°C. |
Pressure | Barg | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
Psig | 15 | 29 | 44 | 59 | 73 | 87 | 100 | 116 | 131 | 145 | 160 | 174 | 189 | 203 | 219 | 232 |
Correction factor | 0.38 | 0.53 | 0.65 | 0.76 | 0.85 | 0.93 | 1.00 | 1.07 | 1.13 | 1.19 | 1.23 | 1.31 | 1.36 | 1.41 | 1.46 | 1.51 |
Product Parts

Commodity | Compressed air filter |
Series | YF |
Flow rate | 1.0m³/min~ 48.0m³/min |
Element grade | 5μm/1μm /0.01μm/0.001mg/m³ |
Working pressure | 143psig |
Working temperature | 1.5ºC~80ºC |
Material | Aluminum Alloy |
Color of housing | Red |
Trade term | EXW & FOB SHENZHEN |
Package | Internal Box & External Carton |
Warranty | 15 years for filter housing, 4000-6000 hours under rated working conditions for filter element |
|
YUKA Certificates
YUKA Patents

YUKA Factory

YUKA Facility

YUKA in Shanghai ComVac Asia & Hannover Messe Exhibition

YUKA Delivery
