Vh9 Solar Tracker Slewing Drive
China Vh9 Solar Tracker Slewing Drive, Find details about China Slewing Drive, Slewing Gear from Vh9 Solar Tracker Slewing Drive
| Model | VH9 | Square Tube Shaft | 110m |
| 24VDC motor | Yes | Customized | Yes |
| Holdng Torque | 58Kn.m | Tiliting moment Torque | 12Kn.m |
| Output Torque | 6405N.m | Output Speed | 0.025rpm |
Coresun - Practical Slewing Drive&Slewing Bearing Promoter.
The slewing drive is a special slewing reduction product derived from the slewing bearing product with high integration and large reduction ratio, simple structure, convenient use and maintenance, because the slewing ring is used as the follower and the frame basis, the slewing ring is used The inner and outer rings respectively realize the input and output of driving power, so that the slewing drive can not only realize 360-degree rotation without a dead point, but also can install a driving power source on the basis of the slewing ring frame at the same time, so its transmission efficiency is high and it is a mechanical transmission The new member of the device family. Because it is essentially a reduction gear, it can also be called a rotary reducer, a turntable reducer or a drive turntable.
Slewing drive can be divided into gear drive and worm gear drive according to the different transmission forms. According to the different closed forms of the transmission pair, it can be divided into open and closed types. The simplest form of slewing drive is used in excavators, tower cranes, etc. The drive turntable on the construction machinery product is the last link of the reduction transmission chain. This kind of rotary drive is an open gear transmission, and its front end needs to be equipped with a planetary reducer with a large reduction ratio as its power input, so it can only be called In order to expand the application range of such products and further improve the convenience of product use and maintenance, the slewing drive with integrated worm gear transmission was developed for the embryonic form of slewing drive. In order to further improve the drive capacity of the product, the enveloping worm drive It is also applied to such products. The rotary drive equipped with an envelope worm not only increases the driving torque, but also improves the driving accuracy. It can also be digitally controlled, so it is widely used in tracking and fine-tuning devices on solar and wind power generation equipment. , In addition, it has good application effects in the fields of robots, radar, low-speed heavy-duty lifting, lifting equipment, and precision CNC turntables.
Slewing drives are perfect for situations requiring both load-holding and rotational torque from the same gearbox.Ttypical applications include solar trackers, wind turbines, satellite and radar dishes, truck cranes, man lifts, utility equipment, hydraulic equipment attachments, oil tool equipment, tire handlers, digger derricks, and automotive lifts.
The performance ranges from 6kNm to 220kNm of holding torque, 200Nm to 63kNm of output torque, 500Nm to 271kNm of overturning moment load capacity, and gearbox reduction ratios of 30:1 up to 156,600:1. The mounting can be done horizontally, vertically, or across a combination of multiple axes.
Vertical installation
It is advised to mount the slewing drives referring to attached drawing upside in solar applications for better protection.
For other applications, the mounting directions shall be based on the evaluation of the protection level and it shall be better for better protection.
Horizontal installation
It is advised to mount the slewing drives upside down on the azimuth axis in solar applications for better protection and add protection for the elevation axis.
For other applications, the mounting directions shall be based on the evaluation of the protection level and it shall be better for better protection.
Tilting Moment Torque: Torque is the load multiplied by distance between the position of load and the center of slewing bearing. If the qorque generated by load and distance is greater than the rated tilting moment torque, slewing drive will be overturned.
Radial load: Load vertical to the axis of slewing bearing
Axial load: Load parallel to the axis of slewing bearing
Holding torque:It is the reverse torque.When the drive is rotating reversely, and parts are not damaged,The maximum torque achieved is called holding torque.
Self-locking: Only when loaded, the slewing drive is not able to reverse rotate and thus called self-locking.
Products Photo
Coresun Drive slewing drive VH9 is a good solution to 90-120pcs single axis solar tracker design.
The production is widely export to USA,Canada,Germany,Spain,France,Poland,Turkey,Korea,Australia,South Africa,India, Brazil,Chile...
Products Certificate
Our slewing drive gear motor have arroved by CE and ISO2001 certificate.
CONTACT US
It is sincerely looking forward to cooperating with you for and providing you the best quality product & service with all of our heart!
You Might Also Like
30-50cbm Movable Hopper for Discharging Bulk Cargo
4b-Wd Bsp Male ED Sealing Plug
Standard Specimen Clamp for Microtome
Luxury Crystal Glass Scent 30ml 1 Oz Perfume Bottle
Tetra Pak Sugar Dissolving System
High Quality Factory Supply Zinc Plated Pozi Countersunk Chi......
Improve Root System Root Promoter Seaweed Functional Organic......
Creative Handmade Three-Dimensional Photo Frame Outside Thic......
Jinko Panel High Quality Pmw Dimming Controller Ni-MH Batter......
80/20 Copper Nickel ( CuNi20 )
Natural Blue Gemstone Stone Oval Vanity Hotel Wash Basin Sin......