Products

Ep Fabric Ep125 Rubber Conveyor Belt

China Ep Fabric Ep125 Rubber Conveyor Belt, Find details about China Conveyor Belt, Ep Conveyor Belt from Ep Fabric Ep125 Rubber Conveyor Belt

Model NO.
EP125
Types
Ep100 Ep125 Ep150 Ep200 Ep250 Ep300
Certificate
ISO9001 BV SGS
Width
400-2200mm
Trademark
HUAYUE
Transport Package
PVC Water Proof Cloth
Specification
SGS BV ISO
Origin
Baoding City Hebei Province China
HS Code
40101200
Model NO.
EP125
Types
Ep100 Ep125 Ep150 Ep200 Ep250 Ep300
Certificate
ISO9001 BV SGS
Width
400-2200mm
Trademark
HUAYUE
Transport Package
PVC Water Proof Cloth
Specification
SGS BV ISO
Origin
Baoding City Hebei Province China
HS Code
40101200
EP fabric EP125 rubber conveyor belt 

1. Features:
Good flexibility, groove formation property and cost-effective. It is mainly used to transport powder,small and medium granular or less wearing materials at common temperature.
Structure:
It uses multi-layer cotton canvas or terylene cotton canvas as carcass and finished through the processes of calendering,firming and vulcanizing,etc
Conveying small and not large massiveness materials, meanliness materials and biscuit materials. Applicable for conveying long and not very long distance materials, weight materials and materials that is vey long and its sliding rate is very fast.
 
2. Detailed Product Description
1.plies:3-10ply
2:width:400-2200mm
3.thickness:8-30mm
4.Tensile Strength: 9-25MPA
5.quality control:ISO9001:2008,BV
6. high-performance characteristic:resistance to abrasion  
 

3. Physical Properties of Rubber Cover (before aging)

GradeTensile Strength/Mpa ≥Breaking Elongation/% ≥Abrasion Loss/mm3 ≤
H24450120
D18400100
L15350200

Note:

Grade H-used for transporting sharp, abrasive materials which can damage belts badly.

Grade D-used for transporting highly abrasive materials.

Grade L-used for transporting medium-abrasion materials.

After-aging properties of rubber cover(70ºC, 7days):

Tensile strength and breaking elongation are both not lower than 75% of before-aging values.


4. Full-thickness Tensile Properties

a. Longitudinal tensile strength, not less than the below table. (N/mm)

Nominal belt type160200250315400500630
800100012501600200025003150

b. Full thickness, longitudinal elongation at reference force, not more than 4%.

c. Ply adhesion:

ItemPly to plyRubber cover to ply
Rubber cover thickness ≤1.5mmRubber cover thickness >1.5mm
All samples average value/ (N/mm) ≥4.53.23.5
All samples min peak value/ (N/mm) ≥3.92.42.9
Note: All samples max peak value is not more than 20N/mm.

d. Straightness not more than 25mm

You Might Also Like