Products

Double Wave Solder

China Double Wave Solder, Find details about China Desk Wave Soldering Machine, Small Wave Soldering Machine from Double Wave Solder

Model NO.
Double wave solder
Max PCB Size
250*350mm
Tin Capacity
120kg
Leaded Tin
Yes
Wave Height
3-8mm
Temperaure
200-360c
Spray Model
Foam Tube
Trademark
TORCH
Transport Package
Plywood Case
Specification
140*100*150cm
Origin
Beijing, China
HS Code
8515809000
Model NO.
Double wave solder
Max PCB Size
250*350mm
Tin Capacity
120kg
Leaded Tin
Yes
Wave Height
3-8mm
Temperaure
200-360c
Spray Model
Foam Tube
Trademark
TORCH
Transport Package
Plywood Case
Specification
140*100*150cm
Origin
Beijing, China
HS Code
8515809000

Automatic double crest wave soldering machineTB780D


Double Wave Solder
 Description:
A. function of flux spray device:
1 nozzle: import nozzle, better spray
2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe
3 moving nozzle system: air cylinder driven, spray speed and spray width can be adjusted by handle.
4 filtration flux system: collecting device is made of multi collecting lay, it is convenient to clean.
5 flux controlling: anti-corrosive controlling flux and display flux.
B. function of flux foam device:
With foam function, inner foam pump, it don't need outer air supply, it is convenient to spray flux.
1 preheating temperature range: room temperature-260ºC
2 controlling way: with PID controlling to make







C. Soldering process :
3 Heat: infrared heating, temperature uniformity, rapid speed, PID supply heat.
4 Preheating security: surface temperature is lower than fire point of flux.
5 Preheat: it can meet preheating need of batch PCB welding, uniformity temperature, small temperature differences of PCB.
D. Soldering system features:
1 Material: 316 stainless steel
2 Capacity: 100kg double wave crest capacity
3 Height range of wave crest: 0-8mm adjustment and keep wave crest balance.
4 Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw during melting tin and save 3kw during constant temperature.
5 Unique nozzle: double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.
6 Heat controlling system: PID control, accuracy is ±2
7 Moving tin pot: in and out can be finished by hand.
8 Motor of wave crest: import motor, running stable.
9 Tin pipe: screw thread stem
Import motor                         
 
 
 
Cooling system
1 Cooling motor: unique cooling design, it can achieve import device effect.

 
 
 
 
Transmission system:
1 chain: stainless steel chain, anti-corrosive, ametabolic.
2 rail system: special strong aluminum
3 speed: 0-1800mm/min
4 accuracy: motor is from Taiwan, it is easy to adjust and maintain.




Controlling system:
1 buttons on the panel: manual/ automatic control, speed can be set, temperature can be display.
2 protect short circuit: with short circuit protection, with Sanling air switch protection in main power and tin pot of preheating zone, with fuse power in controlling system.
3 urgent stop protection: there are 2 urgent stop protection in the machine, please cut off power in urgent condition.
4 whole machine controlling: relay controlling.
5 transmission speed: Taiwan motor makes sure stable speed.
6 wave crest: Taida transducer makes wave crest flatter.
7 over-current protection: over-current protection with transducer, it will cut off power when current is over to make motor safe.
8 modularization wiring device: there are main wiring modularization and controlling modularization.

Technology parameters:
Item
 		SpecificationTB780D(double wave crest)
1solder typelead / common solder
2max width of PCB350mm
3Components heightAbove ≤130mm under ≤8mm
4Capacity120KG
5Preheating length600mm
6temperature accuracy±2
7spray wayFoam
8temperature rangeroom - 300
9wave height0-8mm, keep balance wave crest
10heating controllingPID
11speed0-1800mm/min
12start power/normal power12KW/6KW
13preheating temperatureroom-260ºC
15Width adjustManual adjusting
16Transmit angle3-8
17Directionright→left
18controlling accuracyTaiwan motor
19Weight (Kg)650KG
20Dimension L x W x H(mm)1400*1000*1500MM
it is 2100mm when the machine include loading and cooling system.

 

You Might Also Like