Products

FM200 Fire Fighting Gas Extinguishing System

China FM200 Fire Fighting Gas Extinguishing System, Find details about China Fire Fighting System, FM200 Fire Fighting System from FM200 Fire Fighting Gas Extinguishing System

Model NO.
ZF-150
Effective Range
5m
Retirement Life
10 Years
Dry Powder Type
Ordinary Dry Powder
Power Source
Pressure Fire Extinguisher
Color
Red
Fire Extinguishing Means
5.3MPa ~ 5.4MPa
Design Pressure of The Nozzle
Normal 0.7MPa, Min.0.40MPa
Working Temperature
-10 to +60
Discharging Time
Less 10s
Gas Filling Rate( Density)
Less 1.15kg/L
Power Supply
Dcv 24, 0.5A
Max Protected Area
Max 800m² , Max Volume 3600m³
Polit Valve Powder Supply
6.0± 1.0 MPa(20c)
System Working Pressure
-10c~55c
Trademark
Asenware
Transport Package
Carton
Specification
CE ISO9001
Origin
Shezhen China
HS Code
842410000
Model NO.
ZF-150
Effective Range
5m
Retirement Life
10 Years
Dry Powder Type
Ordinary Dry Powder
Power Source
Pressure Fire Extinguisher
Color
Red
Fire Extinguishing Means
5.3MPa ~ 5.4MPa
Design Pressure of The Nozzle
Normal 0.7MPa, Min.0.40MPa
Working Temperature
-10 to +60
Discharging Time
Less 10s
Gas Filling Rate( Density)
Less 1.15kg/L
Power Supply
Dcv 24, 0.5A
Max Protected Area
Max 800m² , Max Volume 3600m³
Polit Valve Powder Supply
6.0± 1.0 MPa(20c)
System Working Pressure
-10c~55c
Trademark
Asenware
Transport Package
Carton
Specification
CE ISO9001
Origin
Shezhen China
HS Code
842410000
FM200 Fire Fighting Gas Extinguishing System

FM200 Fire Fighting Gas Extinguishing System
FM200 Fire Fighting Gas Extinguishing System



HFC-227ea finds use in fire suppression systems in data processing and telecommunication facilities, and in protection of many flammable liquids and gases. HFC-227ea falls in the category of Clean Agents and is governed by NFPA 2001 - Standard for Clean Agent Fire Extinguishing Systems. Effective fire suppression requires introducing a concentration of the HFC-227ea agent between 6.25% and 9% depending on the hazard being protected. Its NOAEL level for cardiac sensitization is 9%. The United States Environmental Protection Agency allows concentration of 9% volume in occupied spaces without mandated egress time, or up to 10.5% for a limited time. Most fire suppression systems are designed to provide concentration of 6.25-9%.

FM-200 Storage Components - Storage components consist of the cylinder assembly(s), which contains the FM-200 chemical agent, and the cylinder bracket(s), which holds the cylinder assembly securely in place.
FM-200 Distribution Components - Distribution components consist of the discharge nozzles used to introduce the FM-200 into a protected hazard along with the associated piping system used to connect the nozzles to the cylinder assembly.
Trim Components - Trim components complete the installation of the FM-200 system and consist of connection fittings, pressure gauge, low-pressure supervisory switch, electric valve actuator, and manual valve actuator.
Slave Arrangement Components - Slave arrangement components consist of the pneumatic valve actuator(s), actuation check valve, vent check, actuation hose, and fittings required for a multiple cylinder (slave) arrangement.
Supplemental Components - Supplemental components include the discharge pressure switch and manifold check valve. They supplement the core equipment or complete a specific multi-cylinder configuration.
Control Panel - This device monitors the condition of the electric actuator, detectors, warning devices, cylinder pressure, and any manual release and abort stations. All electric or electronic devices must connect to the control panel in order to function.
Early Warning Detection and Alarm Devices - Early warning detection devices coupled with manual release and abort stations maximize system efficiency while audible and visual alarm devices alert staff of alarm conditions.



FIRE DETECTS AND ALARMS
Fire control panel +smoke and heat detectors
Fire alarm bell +manual button,
Light warning gas discharging
Before we make offer we need follow technical,
Room size: Length width height
Protected subject
Better submit drawing of project
We can send offer within 24 hours after received your informations
 Working pressure 4.2 Mpa or 2.5Mpa
 
 Discharge time ≤ 10s
 
 Filling desity: ≤ 950kg/m3
 
 System working power: AC 220V DC 24V 1A
 
 System working pressure: 10c~55C
 
 Working method Manual, auto, and eletrical
 
 

You Might Also Like