China Rod End Bearing SA15es 2RS, SA17es 2RS, SA20es 2RS, SA25es 2RS, SA30es 2RS, SA35es 2RS, SA40es 2RS, SA45es 2RS, SA50es 2RS, SA60es 2RS, SA70es 2RS, SA80es 2RS, Find details about China Spherical Plain Bearing, Rod End from Rod End Bearing SA15es 2RS, SA17es 2RS, SA20es 2RS, SA25es 2RS, SA30es 2RS, SA35es 2RS, SA40es 2RS, SA45es 2RS, SA50es 2RS, SA60es 2RS, SA70es 2RS, SA80es 2RS
Rod ends consist of an eye-shaped head with integral shank which forms a housing for a standard spherical plain bearing. As a rule, rod ends are available with left or right-hand female (internal) or male (external) threads to ISO 965/1:1980. Where rod ends are needed for specific applications - primarily those where a rod end is attached to the end of a piston rod or at the base of a hydraulic cylinder - rod ends are available with slotted shank and compressible threaded section or with a "welding shank" i.e. a shank suitable for welding to another component.
TIK rod ends which require maintenance are available as standard with the sliding contact surface combinations steel-on-steel and steel-on-bronze. Both types of rod end require regular relubrication. Steel-on-steel rod ends have sliding contact surfaces which are hardened, phosphated and treated with a running-in lubricant. They are very resistant to wear and therefore particularly suitable for applications where heavy loads of alternating direction have to be accommodated. Steel-on-bronze rod ends have a hardened and chromium plated inner ring and a bronze outer ring. Their performance under conditions of lubricant starvation is therefore very good. TIK maintenance-free rod ends have special sliding layers of modern dry sliding materials characterised by low friction. They find application above all where long service lives are required without maintenance. Primarily, however, they are intended for applications where the load acts in a constant direction.
Bearing No. | Boundary dimensions(mm) | Mass | ||||||||||
d | B | dk | C1 | d2 | G | h | l1 | l2 | rs | α° | Kg | |
max | max | 6g | min | max | min | ≈ | ||||||
SA5E | 5 | 6 | 10 | 4.5 | 21 | M5 | 36 | 16 | 46.5 | 0.3 | 13 | 0.011 |
SA6E | 6 | 6 | 10 | 4.5 | 21 | M6 | 36 | 16 | 46.5 | 0.3 | 13 | 0.013 |
SA8E | 8 | 8 | 13 | 6.5 | 24 | M8 | 42 | 21 | 54 | 0.3 | 15 | 0.026 |
SA10E | 10 | 9 | 16 | 7.5 | 29 | M10 | 48 | 26 | 62.5 | 0.3 | 12 | 0.044 |
SA12E | 12 | 10 | 18 | 8.5 | 34 | M12 | 54 | 28 | 71 | 0.3 | 10 | 0.066 |
SA15ES | 15 | 12 | 22 | 10.5 | 40 | M14 | 63 | 34 | 83 | 0.3 | 8 | 0.121 |
SA17ES | 17 | 14 | 25 | 11.5 | 46 | M16 | 69 | 36 | 92 | 0.3 | 10 | 0.172 |
SA20ES | 20 | 16 | 29 | 13.5 | 53 | M20×1.5 | 78 | 43 | 104.5 | 0.3 | 9 | 0.283 |
SA25ES | 25 | 20 | 35.5 | 18 | 64 | M24×2 | 94 | 53 | 126 | 0.6 | 7 | 0.504 |
SA30ES | 30 | 22 | 40.7 | 20 | 73 | M30×2 | 110 | 65 | 146.5 | 0.6 | 6 | 0.835 |
SA35ES | 35 | 25 | 47 | 22 | 82 | M36×3 | 140 | 82 | 181 | 0.6 | 6 | 1.41 |
SA40ES | 40 | 28 | 53 | 24 | 92 | M39×3 | 150 | 86 | 196 | 0.6 | 7 | 1.86 |
SA45ES | 45 | 32 | 60 | 28 | 102 | M42×3 | 163 | 92 | 214 | 0.6 | 7 | 2.57 |
SA50ES | 50 | 35 | 66 | 31 | 112 | M45×3 | 185 | 104 | 241 | 0.6 | 6 | 3.58 |
SA60ES | 60 | 44 | 80 | 39 | 135 | M52×3 | 210 | 115 | 277.5 | 1 | 6 | 5.73 |
SA70ES | 70 | 49 | 92 | 43 | 160 | M56×4 | 235 | 125 | 315 | 1 | 6 | 7.94 |
SA80ES | 80 | 55 | 105 | 48 | 180 | M64×4 | 270 | 140 | 360 | 1 | 6 | 12.064 |