LED Waterproof Soft Strip Light Epoxy Resin
China LED Waterproof Soft Strip Light Epoxy Resin, Find details about China Epoxy Resin, Epoxy Glue from LED Waterproof Soft Strip Light Epoxy Resin
Basic Info.
Model NO.
1169A/B-1
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Transparent
Shelf Life
Six Months
Components Rate
1:1
Trademark
Jinhua glue
Transport Package
10kg/Set, Carton
Specification
ROHS, REACH, CPSIA, PAHS
Origin
Shenzhen, Guangdong, China
HS Code
3506912000
Model NO.
1169A/B-1
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Transparent
Shelf Life
Six Months
Components Rate
1:1
Trademark
Jinhua glue
Transport Package
10kg/Set, Carton
Specification
ROHS, REACH, CPSIA, PAHS
Origin
Shenzhen, Guangdong, China
HS Code
3506912000
Product Desciption
Epoxy resin No.: 1169A/B-1
Epoxy resin Specification: 10kg/set
[Main Component of epoxy resin glue]
A component is resin, B component is curing agent.
The main agent 1169A-1 Curing agent 1169B-1
Color: Colorless transparent Colorless transparent
Specific gravity: 1.15 1.15
Viscosity25° C: 700-1500CPS 1200-2500CPS
[Feature]
Epoxy resin 1169AB-1 is based on the room temperature, having the features of:
(1) fine yellow resistance
(2) UV light resistance
(3) moderate viscosity, colorless, transparent
(4) good natural defoaming properties, normal temperature or heating curing softness is good, good surface
[Scope Of Application]
The products of this series are widely used for LED hard and soft strip light, decoration crystal glue, crystal craft, signs, nameplate, the surface encapsulation of the badge or transparent perfusion of electronic components.
[Conditions of usage]
1)Mixing ratio: A: B = 100: 100(weight ratio)-->1: 1
2)Hardening conditions: 25° C× 20H or 55° C× 3H(2 g)
3)Usable time: 25° C× 80min (100g)
[Using Method]
1. Working environment: The container of holding glue please keep clean, A and B part should be in accordance with the weight ratio, weigh accurately, mix fully along the container wall by clockwise and use after 3 to 5 minutes.
2. According to the operational time and dosage of mixing rubber, avoid wasting. When the temperature below 15° C, please put A glue to glue again after warm up to 30° C, easy to operate, (a glue will be thicken when low temperature ); Must be sealed lid after use, avoid product rejection caused by moisture absorption.
3. When the relative humidity is more than 85%, the curing surface easy to absorb moisture in the air, form a layer of white mist, so when the relative humidity is more than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
[Warning]
1. The operating environment should be ventilative and should keep away of the fire. Closely sealed after use.
2. Avoid the glue contact the skin and the eye, if contacts the skin, with soap and clear water cleaning, if touches the eye carelessly, uses the clear water to flush and to see a doctor immediately.
3. If the liquid cement has the stratification when used for a long time, use after the agitation evenly, do not affect its product quality
4. Take strict precautions against touching by the kids and entering into the mouth.
5. Please make a trial to avoid usage mistakes before application.
[Storage And Packing]
Stock the products in the air-tight seal at the temperature of 25° C. The shelf life is half a year. It is available to use based on passing of the test if being beyond the shelf life.
This soft clear AB epoxy resin glue can be also widely used for stickers, labels, nameplate, under-water lamp potting, etc.
FREE SAMPLE IS AVAILABLE!!!
Jinhua professional produce and market all kinds of epoxy resin AB glue which covers a very large range of applications: Soft AB glue for stickers, LED strip potting, badge, nameplate, nail cutters, keychain!!!
Hard clear resin for LED channel letters, photo frame coating, hand made diamond, jewelry, crafts, nacklace, bangles, bracklets, earrings, rings, miniatures such as simulated water, soup,lquid drinks and fishbows to be used in a child's dollhouse, anything you can image clear and shinning, but cheap and easy to operate!!!
Coating resin for surfboard, paddle, christmas ball, globe, foam products coating, bicycles, boats, golf clubs,skies, snowboards, swimming pool, garage, wood table coating, Epoxy flooring, to make it hard and durable!!!
Special ahhesion for wood, metal, glass, stone and some plastic.With very strong and high durable bond after cured!!!
Flexible potting resin for electronic products such as motors, generators, transformers, swithgeear, insulators, mold filling,LEDs, perfectly to protect the potting items from short circuit, dust, water, and moisture, and giving the potting items a more stable and longer life than unpotted products!!!
Pls contact us just directly dial +86-13823546652 to discuss your application for a best EPOXY SOLUTION!!!
Epoxy resin Specification: 10kg/set
[Main Component of epoxy resin glue]
A component is resin, B component is curing agent.
The main agent 1169A-1 Curing agent 1169B-1
Color: Colorless transparent Colorless transparent
Specific gravity: 1.15 1.15
Viscosity25° C: 700-1500CPS 1200-2500CPS
[Feature]
Epoxy resin 1169AB-1 is based on the room temperature, having the features of:
(1) fine yellow resistance
(2) UV light resistance
(3) moderate viscosity, colorless, transparent
(4) good natural defoaming properties, normal temperature or heating curing softness is good, good surface
[Scope Of Application]
The products of this series are widely used for LED hard and soft strip light, decoration crystal glue, crystal craft, signs, nameplate, the surface encapsulation of the badge or transparent perfusion of electronic components.
[Conditions of usage]
1)Mixing ratio: A: B = 100: 100(weight ratio)-->1: 1
2)Hardening conditions: 25° C× 20H or 55° C× 3H(2 g)
3)Usable time: 25° C× 80min (100g)
[Using Method]
1. Working environment: The container of holding glue please keep clean, A and B part should be in accordance with the weight ratio, weigh accurately, mix fully along the container wall by clockwise and use after 3 to 5 minutes.
2. According to the operational time and dosage of mixing rubber, avoid wasting. When the temperature below 15° C, please put A glue to glue again after warm up to 30° C, easy to operate, (a glue will be thicken when low temperature ); Must be sealed lid after use, avoid product rejection caused by moisture absorption.
3. When the relative humidity is more than 85%, the curing surface easy to absorb moisture in the air, form a layer of white mist, so when the relative humidity is more than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
[Warning]
1. The operating environment should be ventilative and should keep away of the fire. Closely sealed after use.
2. Avoid the glue contact the skin and the eye, if contacts the skin, with soap and clear water cleaning, if touches the eye carelessly, uses the clear water to flush and to see a doctor immediately.
3. If the liquid cement has the stratification when used for a long time, use after the agitation evenly, do not affect its product quality
4. Take strict precautions against touching by the kids and entering into the mouth.
5. Please make a trial to avoid usage mistakes before application.
[Storage And Packing]
Stock the products in the air-tight seal at the temperature of 25° C. The shelf life is half a year. It is available to use based on passing of the test if being beyond the shelf life.
This soft clear AB epoxy resin glue can be also widely used for stickers, labels, nameplate, under-water lamp potting, etc.
FREE SAMPLE IS AVAILABLE!!!
Jinhua professional produce and market all kinds of epoxy resin AB glue which covers a very large range of applications: Soft AB glue for stickers, LED strip potting, badge, nameplate, nail cutters, keychain!!!
Hard clear resin for LED channel letters, photo frame coating, hand made diamond, jewelry, crafts, nacklace, bangles, bracklets, earrings, rings, miniatures such as simulated water, soup,lquid drinks and fishbows to be used in a child's dollhouse, anything you can image clear and shinning, but cheap and easy to operate!!!
Coating resin for surfboard, paddle, christmas ball, globe, foam products coating, bicycles, boats, golf clubs,skies, snowboards, swimming pool, garage, wood table coating, Epoxy flooring, to make it hard and durable!!!
Special ahhesion for wood, metal, glass, stone and some plastic.With very strong and high durable bond after cured!!!
Flexible potting resin for electronic products such as motors, generators, transformers, swithgeear, insulators, mold filling,LEDs, perfectly to protect the potting items from short circuit, dust, water, and moisture, and giving the potting items a more stable and longer life than unpotted products!!!
Pls contact us just directly dial +86-13823546652 to discuss your application for a best EPOXY SOLUTION!!!
You Might Also Like
118kw Water-Cooled 6 Cylinders Doosan Marine Diesel Engine/M......
White Porcelain Cosmetic Packaging Essential Oil Glass Bottl......
Must 2kVA to 5kVA Hybrid Solar Inverter Inbuilt MPPT with Wi......
Ceekie Wholesale Small Capacity Volume 25ml 35ml 50ml 75ml 1......
Used Shantui 220HP Rock Bulldozer SD22W China Second Hand Ch......
Turbo cartridge for Mini Cooper X EP6 CDTS N14 184 HP 116576......
8L Big Capacity Aluminum Pot Stainless Steel Electric Pressu......
Backpack for Women 2021 New Large Capacity Backpack for Wome......
Good Quality Warranty 1 Year 80W Ultraviolet Light with Dete......
Fleece Hard Nano a Polish Pad 150X15mm for Keda/Jcg /Bmr Nan......
Tieback Trimming D1006162
6mm Slot 15 Series China High Quality Industrial Aluminum Pr......