Products

Wheel Based Mucking Loader in Rubber Belt Conveyor

China Wheel Based Mucking Loader in Rubber Belt Conveyor, Find details about China Muck Loader, Wheel Based Muck Loader from Wheel Based Mucking Loader in Rubber Belt Conveyor

Model NO.
MLW80B
Warranty
6months
Color
Bronze
Customized
Customized
Condition
New
Tunnel Requirement
>2.5X2.5m
Max. Muck Capacity
80m3/H
Trademark
BOHWA
Transport Package
Nude Package
Specification
5, 500 X 1, 700 X 2, 100mm
Origin
China
HS Code
84295900
Model NO.
MLW80B
Warranty
6months
Color
Bronze
Customized
Customized
Condition
New
Tunnel Requirement
>2.5X2.5m
Max. Muck Capacity
80m3/H
Trademark
BOHWA
Transport Package
Nude Package
Specification
5, 500 X 1, 700 X 2, 100mm
Origin
China
HS Code
84295900
WHEEL BASED MUCKING LOADER IN RUBBER BELT CONVEYOR

I. INTRODUCTION:
MLW-80 Mucking Loader is 4x4 wheels drive all hydraulic driven loader. It is widely used for rock/ore excavating in hydro power tunnels, underground mining of gold, copper and metal ore etc.

MLW-80 has articulated chassis, it is compact in size. Only 1,700mm in width, which is most suitable for rock mucking in tunnel size of around 2,500x2,500mm and above.

It can be used for loading railed mine car, 3-wheel dump truck, mini truck, belt conveyor system etc.

Power (Dual Power System, optional);
Working, traveling and unloading of the MLW-80 mucking loader are all driven by hydraulic pump, which is driven by electrical motors built in the loader. This kind of powering system allows the loader to give ZERO exhaust air emission in working operation.

In addition to this, one diesel engine is given to drive the loader when long distance traveling is needed, or electricity is not available.
 
Controlling and Steering.
The steering of the loader in traveling is controlled by the steering wheel in the driver cab. Hydraulic control levels are used for controlling the working actions. The entire steering, controlling and braking are hydraulic operated.
 
Conveyor System
The conveyor system is special designed belt conveyor. The Nylon Re-enforced high quality conveyor rubber belt ensure good durability of the belt. The conveyor is adjustable in both angle and flatness. General angle can be adjusted through hydraulic cylinders, and flatness of the conveyor can be adjusted mechanically. The rear end of the conveyor can be folded if needed for traveling or turning in the tunnel purpose. This allows the loader good mobility in small size tunnels.
 
Boom and Arm
Boom and arm of the loader is box structure, it is strong in strength, light in weight, bigger in working range. Boom and arm are joined with floating pin axles; this gives longer service life to the Jib and arm.

To meet the different working height in the tunnel, the arm can be made into extendable arm structure, or hydraulic excavator structure arm.  The extendable arm allows the loader to work in low height tunnel, while the hydraulic excavator structure arm allows higher productivity than the extendable arm structure.
 
Tyres.
All the 4 tyres are solid OTR tyres. In tunnels with sharp and hard rock and gravel, this kind of solid OTR tyre reduces the time loss in tyre reparation and replacement due to cutting to aired tyres.
 
Chassis and Transmission System
The loader has articulated structure chassis. Basing on it, the 4 x4 wheel drive system gives it high maneuverability in operation.



II. SPECIFICATION
ModelUnitMLW-80
Theoretical Mucking CapacityM3/h80
Max. Rock Size Allowedmm700 x 800
Max. Mucking Widthmm2,500
Max. Unloading Heightmm1,500
Max. Unloading Distancemm1,300
Max. Digging Depthmm350
Max. Traveling SpeedKm/h5Km/h;
Belt Conveyor Speedm/s0.5
Conveyor Belt Widthmm800
Total PowerKw28(15+5+8)
Main Electric Motor for Working Kw15kw/380v/50Hz
Electric Motor for Rear Conveyor DrumKw5w/380v/50Hz
Diesel Engine PowerKw8kw(only for traveling)
Hydraulic System PressureMPa14-16
Ground Clearancemm160
Machine Net Weightkg4,600
Max. Gradeability°≤10
Overall Size for Transportationmm5,500 X 1,700 X 2,100
Workable Tunnel Sizemm≥2,500 x 2,500
Note: Loading capacity may vary in different rocks conditions and influenced by the skill of operator. Theoretical loading capacity is only for reference purpose in ideal working conditions.

Hydraulic breaker, roof-scaling bar, optional
Wheel type muck loader in rubber belt convehyor optional
Crawler type muck loader in rubber belt conveyor, in scrapper chain conveyor optional


III. MACHINE COMMISSIONING AND TRAINING
Wheel Based Mucking Loader in Rubber Belt Conveyor
Wheel Based Mucking Loader in Rubber Belt Conveyor


Wheel Based Mucking Loader in Rubber Belt Conveyor

Wheel Based Mucking Loader in Rubber Belt Conveyor
Wheel Based Mucking Loader in Rubber Belt Conveyor
Wheel Based Mucking Loader in Rubber Belt Conveyor
Wheel Based Mucking Loader in Rubber Belt Conveyor

Wheel Based Mucking Loader in Rubber Belt Conveyor
Wheel Based Mucking Loader in Rubber Belt Conveyor
Wheel Based Mucking Loader in Rubber Belt Conveyor
 

You Might Also Like